How do I enable the AU { 02 } in the camd_cfg file and mg_cfg file?

[baretto]

Ive recently installed the "nagrarom7.bin" file..

I was wondering how will I enable the AU { 02 } in the camd_cfg file and mg_cfg file?

Where are these files located?

Cheers

[aftermath]

Ive recently installed the "nagrarom7.bin" file..

I was wondering how will I enable the AU { 02 } in the camd_cfg file and mg_cfg file?

Where are these files located?

Cheers

camd_cfg file it quotes:

# AU
# 00 is ignored (default)
# 01 enable AU
# 02 AU Auto
A: {01} change this to {02}

yellow on remote
tuxbox commander
var
keys
camd_cfg
press the "4" key to edit

once done ,come out and save ,

[baretto]

Thanks mate Ive done that but none of the channels seem to be working

Will I need to do a auto channel rescan?

[Tizzer22]

Thanks mate Ive done that but none of the channels seem to be working

Will I need to do a auto channel rescan?

You shouldint have to do a rescan m8, were exactly did you install the file into?

[Tizzer22]

camd_cfg file it quotes:

# AU
# 00 is ignored (default)
# 01 enable AU
# 02 AU Auto
A: {01} change this to {02}

yellow on remote
tuxbox commander
var
keys
camd_cfg
press the "4" key to edit

once done ,come out and save ,

Ive had it on {01} since the keys rolled again and i still have the channels? Why should i put {02} m8?

[baretto]

You shouldint have to do a rescan m8, were exactly did you install the file into?

I installed the nagrarom7.bin, nagrarom10.bin and nagrarom11.bin files into the "Var / Keys" direcory

I changed the 01 key in my Keylist.txt and all the standard channels have come back but none of the premium channels work..

A box comes up when I try a channel like s*y sp**ts saying:

"evocamd

Can't Decode"

[Tizzer22]

Try putting these files nagrarom7.bin, nagrarom10.bin and nagrarom11.bin into the file /var/scce, then they should work m8.

[Devilfish]

All nagra files should go in /var/scce but most images have a symlink from /scce to /keys so /scce is not actually a folder but a shortcut which points /keys. So if you put all the files in /var/keys it should work.

You might want to check here....

http://www.digital-kaos.co.uk/forums/showthread.php?t=1496

[Tizzer22]

Didnt work for me m8, had to go into scce so its worth a try.

[baretto]

Try putting these files nagrarom7.bin, nagrarom10.bin and nagrarom11.bin into the file /var/scce, then they should work m8.

Which program should I use to do this?

Im using Dreambox Control Centre but I cannot access the scce directory

I can see "scce" but its a <LINK> and not a <DIR>

Does that make a difference?

[baretto]

All nagra files should go in /var/scce but most images have a symlink from /scce to /keys so /scce is not actually a folder but a shortcut which points /keys. So if you put all the files in /var/keys it should work.

You might want to check here....

http://www.digital-kaos.co.uk/forums/showthread.php?t=1496

Yeah I put mine into there and it overwrit

But still no luck.. I think my Keylist is messed up because I put todays updated keys manually after I installed the Nagra files..

[baretto]

Didnt work for me m8, had to go into scce so its worth a try.

Tizzer My one works now every channel up and running

All I did was follow this thread made by Kaos:

http://www.digital-kaos.co.uk/forums/showthread.php?t=1496

[spatton]

How can I access / use Tuxbox? I am using LT Image and dont have Tuxbox.

[maniac2]

Will this fix work with Gemini images?Thanks in advance.

[Donnie Darko]

Will this fix work with Gemini images?Thanks in advance.

Yes.........

[bajan2nv]

will this work for provider N 1d01 ?

[Devilfish]

will this work for provider N 1d01 ?

No idea. Which provider is that? This is a nagra1 auto update fix.