Stilo crazy dash

[autocentarvu]

Hi!

I have here one Fiat Stilo with "oddometer error" and there is NO km just -------.
Dash DO NOT blink (like you need to do proxy aligment)
Now strange thing is that if I put another eeprom in 912d60 dash not working only airbag lamp is on and nothing else, I even try to write full flash but same thing nothing on the dash exept airbag lamp. But if I for example put full flash from another dash and my ORIGINAL eeprom dash is working again but with oddometer error and ------- instead km/h.

on the dash's label is writen:
46821560 supplier 92540

4682156092540
1fcf-10849-xa
SW Ver: 31
HW Ver: 7

FXAA001797

The car is 2001 year of manufacture (one of the first stilos) maybe that is problem?

If anybody have any idea,solution,advice...

Or if someone have original full flash from dash like mine or virgin dump please help.

In Attacment is original flash and eeprom from my dash (but have on mind that I buy this car with this fault,so someone before me try to change km but fu..ed something).If somebody know how to repair my dumps please do.


Thanks in advance

[autocentarvu]

Anybody? 26 views?

[T72]

Anybody? 26 views?
try and report

regards

[autocentarvu]

give me a minute

[autocentarvu]

Yes,now on the desk there is not oddometer error any more.On the desk I can not se if there are ------ instead km/h.
I'm going to test it on the car in next hour or two.
I will post results.

[yellowstilo]

here are some dumps from Stilo dash (normal and Abarth)
It's possible to change the mileage stored in lines 03B0,03C0,03D0,03E0 and 03F0.

[autocentarvu]

All working fine now.Thank you very much T72 for you help.
Can you tell/teach me how did you do it. Did you repair my eeprom or send me another one from same dash version?

You can PM or mail me if you want.

Once again thank you for your help.

Best regards

[autocentarvu]

@ yellowstilo
Thank you for your dumps but dumo from T72 repaired my dash.
I have tons of dums for stilo but strange thing was that neither one don't want to work in this dash only dump from T72 work without problem.
Maybe he will tell/teach us how he did it.

Thanks again

[autocentarvu]

I forget to say that I don't even need to do proxy.

[yellowstilo]

i would be interested in your repair method too....

[autocentarvu]

@ yellowstilo
I figure it out. Yes in that lines are where miles are stored.But in my case problem was in lines from 0380 to 03B0 and I have oddometer error.
Compare my original and T72 eeprom and you wil see differnces.
First thing I try to do on this dash is to put new miles/km in that lines you said but that didn't helped me.

So once again very big "thank you" to user T72 for his good solution.

Best regards

[autocentarvu]

yellowstilo did you understand what I'm talking about?

[yellowstilo]

yes, i understand and will have a look to compare both files,
thanks both of you!

[yellowstilo]

well, i looked at both files, see where the differences are but still can't understand the logic of the repair....

[autocentarvu]

Maybe copy/paste from working dump?
Or there is some repairing method or software to do that.

[yellowstilo]

i guess copy/paste , i will try when i have a faulty cluster....
thanks!

[T72]

if solution was helped to you, please use THANKS buton :)

[dantetimoc]

tnx T72! I repaired one cluster with you file! :bounce:

[dvdegrt]

Hi can someone help fix stilo i had two error first odometer fault or something that anyway have fixed somehow but still no mileage showing can someone fix this dump not know
what somebody worked on it maybe change mileage dont know only try fix now.
thanks

[luiggii79]

in the stilo dash not wrong software bat hardware bad .
may exactly beetwen two layer this pcb , was find carbon conducters ,that conducters is wrong (conduct the another circuit)
your cleaning all carbon conducter with alcool or contact spray

sorry for my english

[dvdegrt]

Hi yes cleaned all fault also in software cause had odometer
fault then show lines instead km anyway when put today in
car all worked again so not sure now what caused the problem think hardware and software problem anyway work fine now

[pinzarufilip]

Hello,

Need Dump for Stilo Abarth Clusters 2002.

32 83 0E 01 19
46754571
1fcf-10849-ME
SW Ver: 2444
SW bumber: 3D
HW Ver: C9

Thank you !