PDA

View Full Version : Renault scenic dci egr off


uliasz
20th November, 2010, 06:16 PM
HI, I need help to disable egr from map. thanks
ominimicu
21st November, 2010, 10:13 AM
you must reduce the egr map to a single straight line.
uliasz
21st November, 2010, 10:19 AM
Egr map in scenic looks like a steering air valve?
uliasz
21st November, 2010, 10:19 AM
Which map is responsible for the egr. Can you help?
levisdj
22nd November, 2010, 11:36 AM
Here's the file.Write to ECU and report result.Bye
uliasz
2nd December, 2010, 08:22 PM
I wrote to ECU and still are errors egr.
DF077 - EGR valve, positive loop difference
DF077 - EGR valve fault
Check lights up.


What you think?
grinovsky
2nd December, 2010, 09:24 PM
hi
try this and repport please
eduardo74
19th December, 2010, 10:32 AM
What tools you are using to read/write to ecu?
uliasz
20th December, 2010, 10:06 PM
Interface Galleto
eduardo74
21st December, 2010, 12:46 AM
Interface Galleto

And no problem with nozzle codes after reading/writing?
dashmader
21st December, 2010, 01:27 AM
And no problem with nozzle codes after reading/writing?

dependig on the year scenic 1.9dci does not have nozzle codes, and there is no problem with the codes due to write
eduardo74
21st December, 2010, 10:43 AM
dependig on the year scenic 1.9dci does not have nozzle codes, and there is no problem with the codes due to write

2004 year and EDC16C3 should be problem, isn`t it?
dashmader
21st December, 2010, 11:23 AM
2004 year and EDC16C3 should be problem, isn`t it?

dont think it would be any problem if you follow the instructions from the galleto interface
uliasz
26th December, 2010, 09:30 PM
When I writed dump auto feedstock goes into emergency mode. The parameters referred to as egr see the difference, ie the desired and actual values of parameters. Errors are adjustable egr and boost pressure. As I picked up a straight line on a map to the top is better, but the indicator lights up under load and after a second will cause it goes out as the gas. (not mode). sorry for my English