View Full Version : BMW E65 3.0D fuel pump relay location
workas
24th November, 2010, 11:14 AM
Hi,for all,maybe someone know location of fuel pump relay E65 3.0D 2003y ,or have wiring diagram?
Thanks in advance
lolo.lolo
24th November, 2010, 07:31 PM
hi
is not a relay... is a kind of ECU... please see attachments.
have fun!
vares
24th November, 2010, 10:43 PM
And it seems to me that this story ends with SBSR exchange:rolleyes:
lolo.lolo
24th November, 2010, 11:43 PM
And it seems to me that this story ends with SBSR exchange:rolleyes:
yes... or...
u open the "box" and resolder all the contacts related to the big relay on the board :) and u make a dollar.
... 9 out of 10 cases works for another 100.000 km.
have fun!
poki
24th November, 2010, 11:53 PM
On this page you can see the electrical diagram
WDS BMW Wiring Diagram System - Model Selection (http://www.bmw-planet.com/diagrams/release/en/)
CBR_bl
25th November, 2010, 11:20 PM
You guys know this German car very nice.
Can you help me with mine.
On same model i have power consumption round 0.5 amps.
I suspect on some modul with CAN failure , but how to find it.
Just to mention, remote stop working , or some initialization need to be done.
Any idea???
Thanks
lolo.lolo
26th November, 2010, 08:46 PM
You guys know this German car very nice.
Can you help me with mine.
On same model i have power consumption round 0.5 amps.
I suspect on some modul with CAN failure , but how to find it.
Just to mention, remote stop working , or some initialization need to be done.
Any idea???
Thanks
hi
u need to diagnose the car with proper diag tool.
on E65 u need gt1 and maybe an OP(P)S and some guy with some experience in BMW.
have fun!
vares
26th November, 2010, 11:26 PM
This is quite a headache to find the culprit.:smokin:
CBR_bl
27th November, 2010, 08:20 AM
Yes i know, on most cars it is.
@lolo i have diag.
Today he comes, anyway 10x for atach
fobara
17th December, 2010, 07:21 AM
You guys know this German car very nice.
Can you help me with mine.
On same model i have power consumption round 0.5 amps.
I suspect on some modul with CAN failure , but how to find it.
Just to mention, remote stop working , or some initialization need to be done.
Any idea???
Thanks
Very common problem - blower motor resistor , so called final stage controller. Sometime fan may come on after car goes to a slip mode.
CBR_bl
3rd January, 2011, 09:21 AM
On E39 yes, but on E65?????????? Never heard for it.
Did you have same situation?
thamomo007
4th January, 2011, 02:48 PM
Hello, see here :
WDS BMW Wiring Diagram System - Model Selection (http://www.bmw-planet.com/diagrams/release/en/)
You have access to all the wiring diagram of "modern" BMW ;)
CBR_bl
5th January, 2011, 10:10 PM
No, it is forbidden for me. :-(
mbena
6th January, 2011, 03:14 PM
Quoto.. tanks
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.