PDA

View Full Version : BMW E65 3.0D fuel pump relay location



workas
24th November, 2010, 11:14 AM
Hi,for all,maybe someone know location of fuel pump relay E65 3.0D 2003y ,or have wiring diagram?
Thanks in advance

lolo.lolo
24th November, 2010, 07:31 PM
hi


is not a relay... is a kind of ECU... please see attachments.


have fun!

vares
24th November, 2010, 10:43 PM
And it seems to me that this story ends with SBSR exchange:rolleyes:

lolo.lolo
24th November, 2010, 11:43 PM
And it seems to me that this story ends with SBSR exchange:rolleyes:

yes... or...

u open the "box" and resolder all the contacts related to the big relay on the board :) and u make a dollar.
... 9 out of 10 cases works for another 100.000 km.


have fun!

poki
24th November, 2010, 11:53 PM
On this page you can see the electrical diagram
WDS BMW Wiring Diagram System - Model Selection (http://www.bmw-planet.com/diagrams/release/en/)

CBR_bl
25th November, 2010, 11:20 PM
You guys know this German car very nice.
Can you help me with mine.
On same model i have power consumption round 0.5 amps.
I suspect on some modul with CAN failure , but how to find it.
Just to mention, remote stop working , or some initialization need to be done.
Any idea???
Thanks

lolo.lolo
26th November, 2010, 08:46 PM
You guys know this German car very nice.
Can you help me with mine.
On same model i have power consumption round 0.5 amps.
I suspect on some modul with CAN failure , but how to find it.
Just to mention, remote stop working , or some initialization need to be done.
Any idea???
Thanks

hi

u need to diagnose the car with proper diag tool.
on E65 u need gt1 and maybe an OP(P)S and some guy with some experience in BMW.


have fun!

vares
26th November, 2010, 11:26 PM
This is quite a headache to find the culprit.:smokin:

CBR_bl
27th November, 2010, 08:20 AM
Yes i know, on most cars it is.
@lolo i have diag.
Today he comes, anyway 10x for atach

fobara
17th December, 2010, 07:21 AM
You guys know this German car very nice.
Can you help me with mine.
On same model i have power consumption round 0.5 amps.
I suspect on some modul with CAN failure , but how to find it.
Just to mention, remote stop working , or some initialization need to be done.
Any idea???
Thanks


Very common problem - blower motor resistor , so called final stage controller. Sometime fan may come on after car goes to a slip mode.

CBR_bl
3rd January, 2011, 09:21 AM
On E39 yes, but on E65?????????? Never heard for it.
Did you have same situation?

thamomo007
4th January, 2011, 02:48 PM
Hello, see here :

WDS BMW Wiring Diagram System - Model Selection (http://www.bmw-planet.com/diagrams/release/en/)

You have access to all the wiring diagram of "modern" BMW ;)

CBR_bl
5th January, 2011, 10:10 PM
No, it is forbidden for me. :-(

mbena
6th January, 2011, 03:14 PM
Quoto.. tanks