PDA

View Full Version : E46 good dump with vin adaption



honingkoning
25th November, 2010, 12:42 AM
Hello mates,

I am looking for a dash dump of a 2000 bmw e46 (m35080)
Its a diesel car.

With milleage 255000
vin is wbaal71050kg59618

Dash is a motometer hw 10 and sw 20.

By the way maybe someone can elp me also on a dump of a kangoo (year 99 jaeger) diesel with no rpm and no clock, just for my collection.

Best regards.

honingkoning
26th November, 2010, 03:22 AM
Hello mates,

I am looking for a dash dump of a 2000 bmw e46 (m35080)
Its a diesel car.

With milleage 255000
vin is wbaal71050kg59618

Dash is a motometer hw 10 and sw 20.

By the way maybe someone can elp me also on a dump of a kangoo (year 99 jaeger) diesel with no rpm and no clock, just for my collection.

Best regards.

No one mates!!!!!!!

Oh and forget about the kangoo thing i already found one on the forum.

honingkoning
26th November, 2010, 09:35 PM
No one mates!!!!!!!

Oh and forget about the kangoo thing i already found one on the forum.

Can someone supply me a dump if the bmw dash with or without changing vin for me.

Best regards

dashradio
26th November, 2010, 10:01 PM
Hello mates,

I am looking for a dash dump of a 2000 bmw e46 (m35080)
Its a diesel car. Dumps is in MILES ?

With milleage 255000
vin is wbaal71050kg59618

Dash is a motometer hw 10 and sw 20.

By the way maybe someone can elp me also on a dump of a kangoo (year 99 jaeger) diesel with no rpm and no clock, just for my collection.

Best regards.

Hi, if you can wait I did one today, dump is at work, it is same HW SW but it is petrol 320 not diesel, is this any good ?

honingkoning
26th November, 2010, 10:35 PM
Hi, if you can wait I did one today, dump is at work, it is same HW SW but it is petrol 320 not diesel, is this any good ?

I dont know if its the same maybe someone can confirm if there is any difference between diesel and petrol.

Thanks Honingkoning.

florinyes
26th November, 2010, 10:39 PM
You can try and check it out..

raf0468
26th November, 2010, 11:57 PM
try this.......

honingkoning
27th November, 2010, 01:04 PM
try this.......

This one is in mile wil that work for me (i have km)

dashradio
27th November, 2010, 05:12 PM
Hi, Here is dump from 320 in miles correct HW SW and correct VIN.

honingkoning
28th November, 2010, 01:01 PM
Hi, Here is dump from 320 in miles correct HW SW and correct VIN.

I tried your dump dashradio everything works ok only problem is the milles.
Is there any way to convert this to km.
I need a km dash

Oh by the way the vin convertion not ok, i still have a orange dot in the dash.

Thanks.

dashradio
28th November, 2010, 08:49 PM
Hi, sorry here is the dump again with Vin changed but still in miles

honingkoning
28th November, 2010, 11:41 PM
Hi, sorry here is the dump again with Vin changed but still in miles

Do you know is there a way to change from miles to km.

dashradio
29th November, 2010, 04:24 PM
Do you know is there a way to change from miles to km.

Sorry no, I don't know of a way to change from miles to Km

knok
30th November, 2010, 09:50 AM
Sorry no, I don't know of a way to change from miles to Km
use PAsoft136 ... or hold knob from cluster and switch ignition on.

nckryder
30th November, 2010, 06:58 PM
Yes all late model BMW odometer can change km to mi or either way using the onboard menu no need for diagnostic kit

dashradio
1st December, 2010, 02:33 PM
Hi, try this dump to see if it displays KM, let me know.

labusas
2nd December, 2010, 12:53 AM
How do I proceed for below steps from Nyo:

1) to mount EWS (do I remove and read the Motorola processor HC11EA9-mask-0D46J-PLCC52 with programmer?)
2) to mount LCM (in circuit OK or remove, how to edit?)
3) to mount Tacho (read eeprom 35080, change with Nyo, write?)
4) Ricalibrare the keys (do I need key programmer or ?)

Can Launch x431 master be of any help in any steps, like synchronizing millage?


To change the km to the keys is necessary to insert her one for one (ON - OFF) for about 1 minute. All key

dashradio
2nd December, 2010, 10:16 AM
How do I proceed for below steps from Nyo:

1) to mount EWS (do I remove and read the Motorola processor HC11EA9-mask-0D46J-PLCC52 with programmer?)
2) to mount LCM (in circuit OK or remove, how to edit?)
3) to mount Tacho (read eeprom 35080, change with Nyo, write?)
4) Ricalibrare the keys (do I need key programmer or ?)

Can Launch x431 master be of any help in any steps, like synchronizing millage?


To change the km to the keys is necessary to insert her one for one (ON - OFF) for about 1 minute. All key

Hi, You will stand more chance of getting replies to this if you start a new post of your own instead of hi-jacking someone elses post.

honingkoning
3rd December, 2010, 01:59 AM
Hi, try this dump to see if it displays KM, let me know.

Thanks dashradio i will trie aand let you know, i will also give it a trie with the manual conversion.

Merci.

honingkoning
8th January, 2011, 04:11 PM
Hi, try this dump to see if it displays KM, let me know.

Hi mate thanks it took a while but the guy came back yesterday and the latest dump you posted is good working and im km also.

Thanks