bsi peu 307 96 601 059 80 eprom f****ed up

[sjonv]

hello,

i have a peugeot 307 2005 with bsi johnson control 96 601 059 80 (v2?)

now with desoldering the eprom 95128 one leg is broken, see picture

how can i solve this problem, have read that a virgin file can help me with this,

and pp2000 (witch i have)

can someone give me more info or the virgin file.

any info/help is welcome

[chacarita]

I have one but y have no number was for 307 CAN, you can check

[marcolr]

If you can scrape a bit where broke the pin until you see a little metal, you can read the contents of the eeprom.
Simply solder a wire on each leg and then use the programmer you like to read.
Buy a new chip and program the backup on it.
That's all!!
I did several times to chipping the nintendo wii that have 3 pins cut into the controller and I assure that the pins of the contoller are much smaller than a pin eeprom.

Regards

[Saniok888]

put fffff in the new eeprom and it will be virgin dump ;) , and get pin code from dealer for maching keys... works 1000% i tryed few times...

regards

[sjonv]

thank you for this info,

first will try marcolr's way, than the 2 other ways.


will lett you know how it goes.


thanks

[sjonv]

i have placed a new 95128 eprom inside the bsi, and reprogrammed it.

works 100%


thanks for helping me out!