LG 42" Plasma

[reddevil157]

Hey guy's, my m8's offered me his 42" plasma, broken of course. He's had a repair man look at it and he say's the x & y board/s need replacing, just wondering is it worth while and if it's easy replace the board/s ?.
Red.

[thewizardofodds]

probably easy enough but price of boards could be dearer than the tvs worth

[allycoops]

Hey guy's, my m8's offered me his 42" plasma, broken of course. He's had a repair man look at it and he say's the x & y board/s need replacing, just wondering is it worth while and if it's easy replace the board/s ?.
Red.

May help you Bud.


http://www.scribd.com/doc/7580885/LG-TV-Plasma-Training-Manual

See your mate and get the exact model number of the Plasma. then you will need the part number of the board that needs replacing.

[madzar]

first check the fuses on the X & Y boards.There is hybrid IC under the aluminium cooler.replace it on the board with blown fuse.

[reddevil157]

Thank's for the reply's ppl, will get the model no & part no 2moro and post back.
Madzar, when you say fuse's, are they like little capacitors ?

[allycoops]

Taken from another post

Thanks go to V8 Dave


http://www.flattvparts.co.uk

[reddevil157]

Taken from another post

Thanks go to V8 Dave


http://www.flattvparts.co.ukCheer's Ally, still waiting on my m8 to get back to me with the model no.

[reddevil157]

Right guy's, I've got a model no. took off the back of the tv and found this mod no PDP 42X20000 inside. On the back that I removed was LG ser no\ cep.no 409mavl- 46869. Looking at the screen it has loads of different colour's on the left half of screen and a thick blue line on the right (both vertical). It has been diagnosed as x & y sustain board/s by a repair man. He told my mate it would cost around 200 euro to supply and fit. Should I be looking for different number's or are these what ye need ?.
Thank's in advance. I did look at the link's I was given but I might as well be looking up a bear's ass. Maybe it's just out dated ?.
Red.

Is this the board no. 6871Q DH068A YDRVTP

[allycoops]

Board number = 6871QDH068A top Y drive. doesnt seem to be in stock @ Flat tv.


These look as if they are the correct parts but wait for V8 Dave to have alook at this thread, (I've pm'ed him for you) he'll advise you Red.


http://www.nikko-electronics.co.uk

http://www.dalbani.co.uk

[v8 dave]

42x2000 is the generation of panel; you should be looking for a number beginning 6870abcxxxx to identify the boards.

As an aside, it'll probably be an RZ-42PY10, or a 42PX5D which can only be described as ~~~~ing shite. The fault also sounds like Y drives having failed (probably due to a blown Y SUS). If the X board is out, you'll have a very milky faint washed out picture; so I'd leave that one alone and start with the Y first.

[reddevil157]

Board number = 6871QDH068A top Y drive. doesnt seem to be in stock @ Flat tv.


These look as if they are the correct parts but wait for V8 Dave to have alook at this thread, (I've pm'ed him for you) he'll advise you Red.


ELECTRONIC COMPONENTS, SEMICONDUCTORS, PARTS, TRANSISTORS, INVERTERS, TRANSFORMERS | DALBANI (http://www.nikko-electronics.co.uk/details_products.php?ProductsID=19572)

Product Details: 6871QDH068A (http://www.dalbani.co.uk/catalogue/product_details.php?id=32180)Cheer's Ally, I know now what the boards are by what you posted, they are rectangular in shape with one corner cut off them. As you look at them on left hand side of tv, there are 2, top one has the top right corner cut off and the bottom one has the bottom right corner cut off, hope this make's sense to ya lol.

[v8 dave]

Board number = 6871QDH068A top Y drive. doesnt seem to be in stock @ Flat tv.

They are in stock, but you need to look for the 6870 number, rather than the 6871 on the sticker in this case

42X2A drives (http://flattvparts.co.uk/index.php?main_page=advanced_search_result&keyword=42x2+drv&search_in_description=1&categories_id=&manufacturers_id=&pfrom=&pto=&dfrom=&dto=&x=0&y=0)

[reddevil157]

what do you reckon of that no then V8 ? ok V8 I'll have a look and get back to ya, thanks.

[reddevil157]

Jesus Christ that small, top, 6870 00H 001A. bottom, 6870 00H 001A, not sure bout the 00 b4 the H, meaning could be a letter QDH,and QFH what you think V8. I f this is no good to ya, I'll get a magnifying glass tomorrow lol.


Sorry I gave you the wrong no Ally, the link for 42x2A drive's that V8gave me look just like them.

[v8 dave]

It'll be QDH/QFH.

I hate diagnosing plasmas; they're a nightmare. Especially these old LGs, they have some weird failure modes...

[reddevil157]

It'll be QDH/QFH.

I hate diagnosing plasmas; they're a nightmare. Especially these old LGs, they have some weird failure modes... lol, great V8, so can you tell me exactly which one or ones I gotta order as one of them in the link has 001A and 001B, both of mine are 001A, cause I'll do it now. Sorry for being thick mate lol.

v8, just so I'm right, your talking bout the first item on the page in the link you gave me, it's 100 quid? I was looking further down sorry.
The yoke's I was looking at are 15 quid.

[v8 dave]

I always replace the Y SUS and the DRVs together, as the only thing that can burn a DRV is a bad SUS board; I actually think it's cheaper to buy them seperately you know looking at the site :)

There are other faults that can cause the trouble you're escribing, but that's in addition to what I know to be up with your set...