View Full Version : Bosch RB4 crypto DEF repair
NogaroB5S4
26th November, 2010, 05:57 PM
Has anyone had any luck with repairing a corrupt Bosch RB4 cluster with DEF on display?
I have tried repairing with MagicDash, but was not successful. I've heard VAGDashCAN or Dejavu is able to repair/restore the corrupted values. I wanted to check in before I purchase.
The dash was apparently damaged with VAG-Commander 1.4 China. DEF on the trip meter and corrupt immo.. Odo reads OK.
Would anyone be able to fix this dump?
Thanks in advance.
mcgustoo
26th November, 2010, 06:28 PM
magicdash do this job..... you must buy a license for it! regards!
oep
26th November, 2010, 06:36 PM
It has to be some way without these high expensive tools?
Anybody can upload good dump for compare ?
Maybe we could figure out something
There are a lot of good guys at forum ;)
ps. what is odometer reading? 188xxx km?
cokolo
26th November, 2010, 08:56 PM
I had the same problem.:motz:
So I decided that I removed power from the battery (10min) and the car is normally turned on and there were no errors in the instrument panel.
Try it and you Maybe you're lucky:wavey:
markony79
26th November, 2010, 09:02 PM
Try to swap the dump
Must work
exe123
26th November, 2010, 09:31 PM
Try to swap the dump
Must work
No, will not work. Only if crytp mask is same and I think it is more realistic to win in a lottery...
poernu
26th November, 2010, 09:32 PM
I had the same problem.:motz:
So I decided that I removed power from the battery (10min) and the car is normally turned on and there were no errors in the instrument panel.
Try it and you Maybe you're lucky:wavey:
Worked for me. Great man THANKS:rangers:
NogaroB5S4
27th November, 2010, 03:06 AM
Thanks for the advice guys. I have the dash powered on the work bench, so disconnecting the battery won't work for me as it's been sitting in between.
I have MagicDash and recently purchased the additional Bosch RB4/RB8 license/level from Smok, but unable to repair at this point. I will email the dump to Smok himself to see if he can edit and repair.
The cluster has 188,xxx on it. The odo shows ok, but trip states DEF and immo is corrupt. Gauges don't light up either. I tried numerous dumps from same dash 950H and HX D27, but re flashing results in dEF and Error every time. I'm able to upload the original dump and the dash comes back to the original state of DEF and 188,xxx. I was told that only two values at 00140 and 00180 were corrupt.
elmaalouf
10th December, 2012, 08:11 PM
hello my friend i have the same problem how did u settled yours?
thanks
d2mike
11th December, 2012, 07:32 AM
hello my friend i have the same problem how did u settled yours?
thanks
What have you done?
Post your dashboard dump ...
Cheers,
d2mike
Youneselm
14th December, 2012, 06:00 PM
have you thinking on ''service mode''?
newgeniehex
14th December, 2012, 06:36 PM
Has anyone had any luck with repairing a corrupt Bosch RB4 cluster with DEF on display?
I have tried repairing with MagicDash, but was not successful. I've heard VAGDashCAN or Dejavu is able to repair/restore the corrupted values. I wanted to check in before I purchase.
The dash was apparently damaged with VAG-Commander 1.4 China. DEF on the trip meter and corrupt immo.. Odo reads OK.
Would anyone be able to fix this dump?
Thanks in advance.
HELLO
magic dash can ca do repair this tacho whithout probleme!!!!
last week i have repair this same dash!!
look and find my post !
regard
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.