CITREON C2 REMOTE FOB

[cleevesy]

i have recently programed a bsi in a citroen c2 04 plate but cannot get the central locking working on the fob , followed the instructions on pp2000 but no joy it was working before i programed the bsi and only fitted the bsi because of wiper fault, any help would be great. thanks

Is there a option in pp2000 to re sync the fob other than manual way by switching ign on and hold lock button??

or do i need to program a new fob ??

[Meat-Head]

*THINK* You are now the proud owner of a 'second hand' remote - nil poi - bin fodder.
but before you do *TRY* (LOOK IT UP) something like ignition 1st click, stand on one leg, face east - should place a traffic cone on your head and say 'wibble'. Press remote see what happens, try your MPV programmer

[cleevesy]

iv programmed the fob in and vehicle starts but no central locking i think new fob maybe in order . but im all out of traffic cones!!!

[Albanais]

iv programmed the fob in and vehicle starts but no central locking i think new fob maybe in order . but im all out of traffic cones!!!
The high frequency remote has a rule, once it is synchronized to one vehicle can not reprogram it to one other, other wise it will be universal remote. So If you want the fob working either you put back the old fob on the new key either you command a new one but as I am aware you can not command it separately, so think about this.
Hope it is helpful

[cleevesy]

yh but i fitted a new bsi from citroen and programmed it to the the vehicle still using the original key/fob so thought it should work , have orderd a new key fob so guna program that 2moro and hope that it will sync and work the central locking...

[Meat-Head]

where have you downloaded phob from - how much?

[cleevesy]

65 inc vat from Advanced Keys (http://www.advanced-keys.co.uk/)

key fob and blade genuine

Also use sks but there pissin me off there postage is crap.

[Albanais]

65 inc vat from Advanced Keys (http://www.advanced-keys.co.uk/)

key fob and blade genuine

Also use sks but there pissin me off there postage is crap.
Put back the old bsi reconnect all conectors and note down all parameters displayed on the menu, after this reconnect the new one and check if the parameters shown on the old bsi are the same to the new one, if not reprogram them and I'm sure that you will solve the problem.
Best regards from Albania m8

[cleevesy]

All sorted , plugged in old bsi and checked preferences found that the fequency for key was set wrong , changed it and was all gd used old key

[Meat-Head]

All sorted , plugged in old bsi and checked preferences found that the fequency for key was set wrong , changed it and was all gd used old key , so have a new peugeot to and to the collection..

Could you explain, in more detail for people who are drink-typing?

Thanks

Meat.