technomate 1000 series new patch.

[thommo]

Sexview AU, DigiTV AU, Polsat AU, Premiere AU, etc 150408
Sexview & FreeX AU
DigiTV AU
Polsat AU
Premiere AU
TPS & Multivision AU, etc

For Premiere Portal channels (Premiere Direkt, Premiere Sport Portal & Erotik AB), press 0 button

For TPS Channels, go to the transponder 10873 (France O) to update

[johnjobbers]

try that later let you know how i got on cheers.

[thommo]

im sure you will......note the date of the patch............:idea:

[best110]

Thanks fo patch

<--best110 added 7 Minutes and 48 Seconds later...-->

I've done everythin but when I use my techonomate 1000ci then after few hovers all channel will be lock again and I need to patch the device again!
Could please hep

Also I can not understan this:
For Premiere Portal channels (Premiere Direkt, Premiere Sport Portal & Erotik AB), press 0 button
Please explain


thanks in advance

[.: JaCkPoT :.]

Everytime you patch your receiver receiver make sure you also load the newest softcam.
You have to press 0 on the premiere portals which opens a small window which directs you to the other premiere channels.

[.: JaCkPoT :.]

Please and a very big please, can someone out there please upload the latest patches for all receivers, im unable to do so but please. Im in need of the softcams too.

[Curious123]

Please and a very big please, can someone out there please upload the latest patches for all receivers, im unable to do so but please. Im in need of the softcams too.

Do not have a Technomate myself so not sure if these are the latest, but is this any good for you?

[.: JaCkPoT :.]

Thanks alot for your time and effort,i really appreciate your doings considering you dont have a technomate yourself.
this isnt a must do but if there is one will anyone upload the latest patches for the 3100. Im not in such a rush that i need it now but if anyone has a few minutes to spare than it will be very welcome

[Curious123]

Here you go my friend would this be of any use to you as this file seems really old.

[.: JaCkPoT :.]

Thanks eversomuch. Just realised i already have this one i dont know as i dont have the access anymore. Appreciate your doings for me very much.

[Curly]

Please and a very big please, can someone out there please upload the latest patches for all receivers, im unable to do so but please. Im in need of the softcams too.

For those like me who have the TM6900HD or the TM6800HD



New patch for 6000 series 27/06/08

--------------------------------------------------------------------------------

Fixed: DigiTV AU

ITV HD: Go to Advance Search - Transponder - 11428 - Red Button - Channel Name = 10510
Showtime & ART AU
Polsat AU
Premiere AU
Digiturk/Lig TV, Kabel, Select Kino, etc on 23east (all nagra channels on Astra 3)
Rai
ORF & ORF HD, etc

For Premiere Portal channels (Premiere Direkt, Premiere Sport Portal & Erotik AB), press Red (Bookmark) button for more channels

To Download software/keys/channel list by USB: Menu - USB - Data Transfer (takes 30secs for software!)

NDF Upload = Channel List upload

Freesat working

Watch 1 channel and playback a recorded file at the same time

Record scrambled & FTA channels


Curly

[.: JaCkPoT :.]

so old!!!!!!! magic is so slow, it has to be said. thnx anyway

[Curly]

so old!!!!!!! magic is so slow, it has to be said. thnx anyway

Yeah it's old m8 but still the current patch lol
He seams to me to focus more on other models rather than the 6000 series.
It's a pity the TPS fix won't work on this patch.
I hope he's working on something newer, or even a dedicated 6000 loader to enable the latest .bin files to be added. I've read about using a bastardised 1000 loader but I'm not keen on putting this on my nice shiney stb and risking bricking the thing lol


Curly

[.: JaCkPoT :.]

Ye the 1000series loader is the one to be used with your receiver. It wont brick it as the 2 boxes are really similar behind the scene and that loader does have a tps tab but dont dare use the .bin files as these will brick the box.

[unklebuk]

thanks will give it ago on my tm1500

[biggie]

is there a guide on how to insert images into box as im a kinda beginner into this

[.: JaCkPoT :.]

There is now such thing called images on TMs i dont think. Heres how to load the patches anyway. Download the relevent patch and extract. Download the relevent loader and extract. Connect your receiver to the pc via rs232c cable. Leave the receiver on standby. Open the loader and select the software tab. Press browse and find the extracted patch. Press ok then start then wait. Thats it. When selecting a channel which should open via patch wait if the scrambled sign comes up and wait for the auto update.

[sooriski]

Hi. As a total newbie, I hope I am posting in the right place here. We want to watch "Detsky Mir" on Hotbird, which now shows as "Viaccess" and "$" on screen. We have a TM1500 CI+ Super (Serial port, not USB - must be an early version!).
We did get it for a short while (perhaps a test period programmed in). Then it cut off. We own no CAM or anything yet although I have upgraded the S/W from Technomate early on. Pointers as to what to do next would be really appreciated. Best wishes to you all.

[krazylegz]

upload the latest firmware from this thread http://www.digital-kaos.co.uk/forums/f75/technomate-tm1000-series-patch-10986/ then load the latest softcam on from this thread http://www.digital-kaos.co.uk/forums/f75/technomate-softcam-updates-273/index22.html post no#328 then if that channel is currently open it will clear

[caja]

Hi Mate,
How do i download the technomate 1500 patch file, please. It does not allow me to download it.

Thanks
Caj

[Tommy]

Fixed DigiTV AU...Tested and working

Files
1000D_1000D_303p
1500Ci+_1000CI_303p

SSSP = 9797


Enjoy...

[dale521]

hiya mate can you help me i have a technomate tm-1500d and i am wanting to patch it as it hasnt been done for a long time can you please tell me how i may be able to do it plz as not used to doing these boxes cheers dale



Everytime you patch your receiver receiver make sure you also load the newest softcam.
You have to press 0 on the premiere portals which opens a small window which directs you to the other premiere channels.

[benny/9]

hiya mate can you help me i have a technomate tm-1500d and i am wanting to patch it as it hasnt been done for a long time can you please tell me how i may be able to do it plz as not used to doing these boxes cheers dale
****************************************
first you need a null modem cable and if your computer only has usb ports on it.you also need a usb to serial converter [both available at maplins]
************************************
how to patch a tm1500 receiver with a null modem cable
*****************************************
[1] you need a null modem cable [female to female 9 pin ends] if you use a laptop you also need a usb to serial converter if your laptop does'nt have a 9 pin com port to use the cable in.
[2] next you need to download the v187 loader panel
[3] now download the latest patch for your tm model
you must use the correct patch they only work on the correct receiver.
[4] now that you have all the above and you have your receiver set-up and all the satellites and channels with the free to air channels opening.
[5] first open the zip folder and take the patch out ready to load on your stb: if you download to your desktop, after you have opened the folder you will see the both the folder and the patch on your desktop the patch is now ready to load onto your receiver.
[6] leave your receiver on standby and connect the null modem cable from your 9 pin com port on your computer to the rs232 port on the rear of the receiver.
[7] next open and run the v187 loader panel, and if you intend to keep your receiver patched, make a shortcut to your desktop for the v187 loader this makes it easier and quicker when you need to patch or add softcamkeys.
[8] once the loader has opened click the browse button and window open for you find the patch where you opened it, when you find the patch left click on it and then click save on the window, this will now close and load the patch on the v187 loader panel
[9] next set the loader at the top of the panel to software and download.next click auto detect and a small panel opens with version detected, click exit on it and then click connect on the panel and the small panel re-opens, then you click start on this panel and wait untill the patch has loaded fully and you will see erasing-writing etc: wait untill everything has compleated and it says finished. click finished and exit the loader panel. your receiver is now patched.now turn your receiver on and check that the channels are open.
[10] if other providers channels dont open you will need to enter the softcamkeys file to open the channels, you do this the same way as patching. after you set the loader panel to keys before useing the softcamkeys file. and then follow the same procedure as patching.
[11] finally you have now patched and got the channels open,

[dale521]

oops sorry pal its the technomate tm-1000d sorry is it just the same and also what it the latest patch i have got the loader and also i have got 1000D_1000D_303p_14-07-2009 is that the latest one and will that load channels aswell ye cheers dale

[dick b]

oops sorry pal its the technomate tm-1000d sorry is it just the same and also what it the latest patch i have got the loader and also i have got 1000D_1000D_303p_14-07-2009 is that the latest one and will that load channels aswell ye cheers dale

Yes mate you load the 1000D just the same and it should auto update the channels, remember there is a time lag and you have to wait a few minutes for the channels to clear.

[dale521]

ok mate ta for help may i asked i have just been told by some one i can not use this box with my telewest connection with no dish is this true cheers dale

[karub]

it dosent let me to download ot

[karub]

i cant download it


Fixed DigiTV AU...Tested and working

Files
1000D_1000D_303p
1500Ci+_1000CI_303p

SSSP = 9797


Enjoy...

[dick b]

ok mate ta for help may i asked i have just been told by some one i can not use this box with my telewest connection with no dish is this true cheers dale

Yes its true the TM1000D is a satellite box and you need a dish.

[dale521]

so i cant use it then with out a dish cheers dale


Yes its true the TM1000D is a satellite box and you need a dish.

[xamas00]

....lets see whether it works also with RAI on 19.2

[Malard]

thanks for this info, is the patch in this thread the latest available?

[Manic01]

http://www.digital-kaos.co.uk/forums/f75/technomate-tm1000-series-patch-10986/#post283263

[nigelspurs1]

i am trying to patch a technomate 1500 ci but i don't know what to do can anybody please help me
Sexview AU, DigiTV AU, Polsat AU, Premiere AU, etc 150408
Sexview & FreeX AU
DigiTV AU
Polsat AU
Premiere AU
TPS & Multivision AU, etc

For Premiere Portal channels (Premiere Direkt, Premiere Sport Portal & Erotik AB), press 0 button

For TPS Channels, go to the transponder 10873 (France O) to update

[Tommy]

i am trying to patch a technomate 1500 ci but i don't know what to do can anybody please help me
Originally Posted by thommo View Post
Sexview AU, DigiTV AU, Polsat AU, Premiere AU, etc 150408
Sexview & FreeX AU
DigiTV AU
Polsat AU
Premiere AU
TPS & Multivision AU, etc

For Premiere Portal channels (Premiere Direkt, Premiere Sport Portal & Erotik AB), press 0 button

For TPS Channels, go to the transponder 10873 (France O) to update


M8 the above patch is a very old patch and does not work for those packages any more, get the latest patch, it will open digi tv at 1.0w, thats about it I'm afraid...


Tommy

[dick b]

i am trying to patch a technomate 1500 ci but i don't know what to do can anybody please help me
start by reading the red sticky section on "noobs guide to patching your technomate".
you will need the following to complete the job.
(1) darkman loader.
(2) patch
(3) softcam.
make sure you unzip all files before trying to load and that you have read and understood the relevant threads in the sticky section.

[X-men]

Is this the latest patch?

[dick b]

Is this the latest patch?

As far as I am aware yes its the latest patch for the 1500 ci

[griffon]

Thank you thommo.

[barlovento]

the files is not open up why is that thanks

[barlovento]

thanks for letting me open the files

[Manic01]

You needed to post first.

[mvpirate]

waiting for download permission thanks in advance

[nagasaki1]

is there anywhere i can get the latest patch please? thanks

[Carew6]

Try here...

Download center (http://download.for-better.biz/bbs/main.php)

[nagasaki1]

thanks - thats great

[loonyking]

were to find new patches for TM1500cl+ and what does a patch do

[weiserbud]

Hi I have a technomate 1000 the guy i bought it from said they were all out of date and could not get any more code's.... could someone please advize me on the next step or do I give the guy another 400 quid for a different system.:hmmmm2:

[OldBloke]

Cant help with TM1000,sorry mate BUT

dont give anyone 400 for a stb and dish,you can get everything you need for well below 300

Hopefully someone can answer your main question

GL

[dick b]

Hi I have a technomate 1000 the guy i bought it from said they were all out of date and could not get any more code's.... could someone please advize me on the next step or do I give the guy another 400 quid for a different system.:hmmmm2:
you can still open bulsat on 39E,arqiva on 5E. canal digitaal is open when keys available but is down at the moment.the 1000D patch I"m sending will open the above with the correct softcam

[nocnoc]

Where can you get the latest softcam?:hmmmm2:

[telveskid]

http://www.digital-kaos.co.uk/forums/f120/bulsat-18-12-2010-a-179093/