PDA

View Full Version : Seat Ibiza 2009 6R0959655 Bosch 0285010138


Smac_a
1st December, 2010, 10:00 AM
Hi everyone!

Can anybody help me clear crash on this module? Dump is from 95320 eeprom in 6R0959655 0285010138 Bosch. I have two different solutions on this one, but no car to test it... Any help would be apreciated. Thanks in advance.

Regards,
Smac_a
41055
ceyhan
1st December, 2010, 10:22 AM
http://www.digital-kaos.co.uk/forums/f170/seat-ibiza-2009y-airbag-153417/
Smac_a
1st December, 2010, 10:29 AM
That is my fist solution, but thank you anyway.
Does anybody have pinout can or k-line for this module so, I can test with VCDS.
ceyhan
1st December, 2010, 11:18 AM
k-line pin out
ceyhan
1st December, 2010, 11:34 AM
pinout picture
aquer
2nd December, 2010, 12:14 AM
Hi,
Try these dumps.
From what I remember VCDS erase crash data.
Regards.
Smac_a
3rd December, 2010, 08:24 AM
Hi,
first of all thank all of you, I will try with dumps from aquer. Pin out for this module is still a mistery to me (it's a 50 pin module). Will try Autodata but... Does anybody have some suggestions?

Once again thank you and regards,
Smac_a
Smac_a
6th December, 2010, 08:00 PM
Finaly done, with help from aquer! It would be really nice to have can pinout for this one, since I don't have the car to test it.

Regards,
Smac_a
41791
Smac_a
8th December, 2010, 05:01 PM
Hi all!

Didn't work, I edited the dump, but got whole lot of errors (9) that I can't delete...
I opened another thread with wanted pinout (can-h,l) so I could test it on a bench since I could barely get the car in for test. But it looks like there is no one that knows.
Aquer, I think I'm going to get the original back, and test with vcds once I get the chance, as you suggested.

Thanks one more time.
Regards,
Smac_a
butugan_mihai
10th December, 2010, 02:36 PM
Hi!please help me with this dump!vw polo 2010 6R0 959 655 K.I tried all the solutions: edit, delete,but nothing....I cant erase crash!I use vcds 10.6
Smac_a
10th December, 2010, 04:55 PM
I can only give you my dump, you can try but it doesn't work (chksum error and bunch of others...). Here you go:
42352

Sorry but i don't have a working on for this one. We're both
stuck. :hmmmm2:

Regards,
Smac_a
Smac_a
10th December, 2010, 06:16 PM
An update:
The original dump (with crash) worked, DTC-s were deleted with
simple scanner (not VCDS!). Airbag light is off.

Regards,
Smac_a
butugan_mihai
13th December, 2010, 09:17 AM
Tell me please with your original dump i can delete crash with VAS 5054?With my original dump with crash i cant delete crash or errors with vas or vcds!
Thanks in advance!
Smac_a
13th December, 2010, 11:02 AM
I was able to delete crash but only with my original dump (not
"repaired" one), but don't use my oriiginal dump without editing
(vin number, maybe adaptation?). Sorry I can't be more helpful
but I had no problems with erasing crash with my original since
it was from the same car.

Regards,
Smac_a


Tell me please with your original dump i can delete crash with VAS 5054?With my original dump with crash i cant delete crash or errors with vas or vcds!
Thanks in advance!