programmer

[cleevesy]

Can some surggest a programer for AM29F200BB eeprom,

Many thanks

[Meat-Head]

*THINK* you need to pop to One Stop Shop! CUS Data Hardware (http://www.c-u-s.co.uk) and download a willheam and TSOP adaptor. Word on street is take 5 mins to suck/blow to chip.

Meaty.

[newgeniehex]

Can some surggest a programer for AM29F200BB eeprom,

Many thanks
hello
willen programmer is good but you want to buy to adpater for read this mcu
http://www.sivava.com/buynow.php?pd=A051http://www.sivava.com/buynow.php?pd=B09 (http://www.sivava.com/buynow.php?pd=A051http://www.sivava.com/buynow.php?pd=B09)

or whit adapter

SIVAVA - Buy It Now (http://www.sivava.com/buynow.php?pd=B15)

:wavey:

[zoro1]

AM29F200BB is a FLASH !
http://www.datasheetcatalog.org/datasheets/560/375999_DS.pdf
And Willem is not a good choise.

[obdmaster]

I use wellon vp-490 , will do lots of flashes, very fast, not used it much YET but reads ,writes ,verifys in seconds no problems at all.

[Meat-Head]

I use wellon vp-490 , will do lots of flashes, very fast, not used it much YET but reads ,writes ,verifys in seconds no problems at all.

Where did you download that from and how much?

[cleevesy]

i have upa usb also just need a programmer to read write this chip as wana immo off ecu , i think willem should do the job , thanks for the help guys.

[omglol]

*THINK* you need to pop to One Stop Shop! CUS Data Hardware (http://www.c-u-s.co.uk) and download a willheam and TSOP adaptor. Word on street is take 5 mins to suck/blow to chip.

Meaty.

Willem is a sh!t. I wouldn't use it on russian Lada from 60's (speaking as owner of this backwards lousy piece of so-called electronics). I have Batronix BX48 and it works perfect.

Wellon, Beeprog, Xeltek ... will do the job the right way too.

[obdmaster]

Where did you download that from and how much?


Got mine off ebay, its a china product ( i think :eek:) so its an original think they all are ( i think :eek:).

Ecutools sell them also m8


China ECU Tools Centre (http://www.ecutool.com/productshow.asp?id=1715&sortsid=3515&sorts=) :hmmmm2:

[cleevesy]

where can i buy willem programmer and PSOP 44 to DIP 32 Adapter in the uk??

[Meat-Head]

where can i buy willem programmer and PSOP 44 to DIP 32 Adapter in the uk??


the link in my first post! The same guy is on ebay - his adaptor has electronic's in it - china ones seem to be direct

HTH

Meat.

[cleevesy]

im with you thanks bud was looking for green adaptor like salvia his one is blue, many thanks rudeboy!

[PierreTheron]

Made some money this week and moving away from willem programmer.

bought wellon vp490 .so hope that is right choice ..//?/???? For all chips.

Willem is a bastard to get connections happy to get good read and then you can still not trust it . Seems like a developer programmer, But it helped even if i had to waste hours reading a chip.. to get a good read.
Pierre

[obdmaster]

Good choice m8, thats what i use for flashes very fast, for eeps i use upa usb, xprog-m for mcu,s, omega just in case:top:

[racin-snake]

i also have a wellon vp490 but you can use a gq4x for 29f200 400 800 works good and cheap adapter and kit is extremely cheap
but wellon supports more stuff and is slightly more expensive and adaptors are more expensive too
but all depends if its for coverage of that chip type or a serious daily used programmer

in this instance of gq4x or vp490 it really is you get what you pay for

[miha99]

I use true usb willem from Canada over 100 times for psop44 and newer had any problem.

[florinyes]

I use this one and never let me down..Think is the programmer to beat..used by a lot of chip tunners too same as the batronix..

MCUmall Electronics Inc. A low cost EPROM EEPROM Atmel PIC I2C SPI programmer online store (http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=3161)

You gonna need this too to read that flash: MCUmall Electronics Inc. A low cost EPROM EEPROM Atmel PIC I2C SPI programmer online store (http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=4238)

Hope it helps..

[PierreTheron]

I know it is good programmer . Member Adam 28 bouhgt that long time ago and never complained but were out of stock at this moment so took second best.. for the price.

Still need a lot of stuff but it takes time...
:afraid::beer::beer:Cheers on the beers...

[grinovsky]

willem is very good choice if you need read write 29fxxx

[PierreTheron]

Hi

Why have nobody brought in the clamp psop 44 Adaptor yet or where can i find it...????????????\

Sorry had to edit so that everyone would understand what i am looking for..









hopefully not tooooo expenive:manusign:

[rossoelab]

Adaptor PSOP 44?
well read post 17

[PierreTheron]

Where did you download that from and how much?
Hi
Got mine from here . Took 3 day to get to me..

MCUmall Electronics Inc. A low cost EPROM EEPROM Atmel PIC I2C SPI programmer online store (http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=4422)

[PierreTheron]

Hi new progr:handkiss:ammer does this 29f400 in a wink and you can trust it ( Make sure you cleaned the pins)

Pierre