new technomate 5000 series patch [Sitemap]

thommo

17th April, 2008, 09:00 PM

christopher7502

25th July, 2008, 12:25 AM

Hi, whats the difference between a patch and softcam do they do the same thing

<--christopher7502 added 2 Minutes and 43 Seconds later...-->

fogot to ask do softcam up date automaticaly when codes change

firestorm

25th July, 2008, 04:42 AM

a patch is the firmware you put on the box this give it the software to open the channels ie sexview ect all you have to do is then go on to the channel and it will update the code for you,for the channel that do not have the au option you will need to load the softcam which has the keys in it but when the keys change you will lose the channel untill you put the next softcam in or enter the keys by the remote

christopher7502

25th July, 2008, 11:38 AM

Cheers, how do i know which channels au or need softcam is it easy i want to watch film /sport is astra 1 best

thommo

25th July, 2008, 12:24 PM

it was posted in april its not the most current patch im sure thees been a few released since.

fateer

10th September, 2008, 02:33 AM

many thanks

.: JaCkPoT :.

11th September, 2008, 10:27 PM

Cheers, how do i know which channels au or need softcam is it easy i want to watch film /sport is astra 1 best

Iv never tried it but i think you can see it in the menu and turn it on and off and i think if you press mute and exit the pop up should have some info.

bagman

18th June, 2009, 01:19 PM

dont know whats happen downloaded something from thommo and now cant recieve any channels ,keeps saying no or bad signal. when i download unto my usb stick it shows it has been downloaded . but when i put the stick into the reciever there is nothing on it .can anyone help ,what am i doing wrong.thanks bagman

mtv1

18th June, 2009, 01:33 PM

try a factory reset then reflash worth a try m8

Sphinx

5th July, 2009, 06:52 AM

Sexview & FreeX AU
DigiTV AU
Polsat AU
Premiere AU
TPS & Multivision AU, etc

For Premiere Portal channels (Premiere Direkt, Premiere Sport Portal & Erotik AB), press Bookmark button

For TPS Channels, go to the transponder 10873 (France O) to update

To Download software by USB: Menu - USB - Data Transfer

NDF Upload = Channel List upload

Thanks. I am trying to download thepatch but I get a message saying you cant download it for one of the following reasons 1,2,3. I dont know what I am doing wrong. Help Plz:hmmmm2:

benny/9

5th July, 2009, 11:13 AM

Thanks. I am trying to download thepatch but I get a message saying you cant download it for one of the following reasons 1,2,3. I dont know what I am doing wrong. Help Plz:hmmmm2:
************************************************** *******
are you loading the patch this way?
this is how you load tm 5000 series patches etc:
via a memory stick first you download the correct software,patch etc:
then open the zipped folder and take the file out
[you must make sure the file is out of the folder]
before you transfer the file to the memory stick, for loading on the receiver.
next to load the patch onto the receiver you put the receiver on a free to air chn then put memory stick in tm5000, USB port. and turn the receiver on next you press the green button on tm 5000 remote,next it goes to data transfer> click>ok you will now see a small file panel with the patch,highlighted then you press>ok again, and it will now download, you will see green loading bar when complete the receiver will re-boot turn off and on again,then press exit. and remove the memory stick,change channels and the channels should open. you might have to load the latest tm softcam if the chns dont open. you load the softcam in exactly the same way

moahmed1969

27th July, 2009, 09:02 AM

hi Guys,

I'm a new boy here and I have question which might sound a bit basic to some of you guys.

I'm trying to download a patch for my 5200, but it will not allow me as I haven't made any posts.

Can someone help?

Mo:argh:

Hoppo

27th July, 2009, 10:26 AM

you have made one now, try down loading again

viridis-terra

3rd August, 2009, 12:48 PM

Hi,
new to this. Can anyone give me some help?

I have just bought a tm5400ci but not sure what to do with it

benny/9

3rd August, 2009, 02:11 PM

Hi,
new to this. Can anyone give me some help?

I have just bought a tm5400ci but not sure what to do with it
************************************************** ***
is it on a motorised dish? if yes then thor 1w has the most open with digi-tv and there are some chnd on sirius 4.8e plus a few chns on hotbird 13e if you dont have a motorised dish you need to point your dish at thor 1w to get the digi-tv chns, first you need to load the latest patch from the forum to open the channels, look in post [11] in this thread for info on how to load the patch, if you need more help post back

dago123

28th September, 2009, 01:18 PM

hi ive been ea for a while lookin trying diffrent patches dont seem to be able to get it to work for me can ay one help please would be grate full
many thanx in advance

dick b

28th September, 2009, 01:52 PM

hi ive been ea for a while lookin trying diffrent patches dont seem to be able to get it to work for me can ay one help please would be grate full
many thanx in advance

give us your exact model and will try and help.

dago123

28th September, 2009, 03:08 PM

my model is technomate 5200 usb super i have 80 cm dish mono block set up on hotbird 13 east through disect i have a card reader installed but no card yet what channels could i get and how
many thanx

dick b

28th September, 2009, 03:11 PM

for 5200d usb super
go to Thor 1W,download patch and softcam and extract both,load onto usb stick.load patch into box 1st wait for box to re-boot,go to menu then "options" make sure digi tv A/U is OFF then load softcam, digi tv should now open.
you can also open afew channels on sirios @5E including acouple of xxx channels PB & PG.

just read your last post I"m afraid you will need to motorise to get the the best out of it.

dago123

28th September, 2009, 04:24 PM

hi dick cant seem to get thor here i can get sirios but not at 5 am i on the rigth track
but i cant seem to get the chanels anything else u can think of
again thanx

dick b

29th September, 2009, 01:12 PM

as I said mate you need that motor,post if you get one someone will help,and there is a good guide in the general stickies. "how to install a motorised dish"

Manic01

29th September, 2009, 02:01 PM

If your dish is fixed on 13e only FTA channels and TV Globo (Portuguese) will open on that satellite. You can maybe get RAI channels (Italian) as well.

baraawe

6th November, 2009, 08:04 PM

Hi every one, i'm new in this game, and i just got TM 5200D Super, i don't know how to patch, can you give me a turtual, how to patch.

Manic01

6th November, 2009, 10:52 PM

Yes mate read the stickies at the top of this section it is all there.

baraawe

6th November, 2009, 11:10 PM

Thnx for your replay, i've downloaded and patched my reciever, but if I want to watch some Nordic canals, where can i get a patch for them? Canal+ sport, Tv3 DK, Kanal 5 DK, DR1 etc. thnx again

dick b

7th November, 2009, 02:55 PM

you will only be able to open digi tv on 1West and a couple of channels on 5East with the patch and latest softcam or if you have an HD box Kabel Deutchland is open on 23.5 East.no conax channels can be opened.

jonathan2010

7th December, 2009, 12:46 AM

hi guys i need this patch so bad

Manic01

7th December, 2009, 02:02 PM

Download it then?

fintaneduffy

20th December, 2009, 06:00 PM

great stuff here

john logie

20th December, 2009, 07:17 PM

New member. I've just got back using my techno 5400CI as I thought it had broken. Turns out the guy who installed my s*y HD receiver decided to unplug the scart lead feeding the motorised sat to my TV - thanks mate. Now I am back trying to find all the channels I used to watch. Good to find Digitial Kaos

kjw

29th December, 2009, 12:45 AM

Hi all,im thinking of buying a technomate5400+super and get it patched as well.Is this goood model for patching or is there a better model on the market?
:fight:

plamen.1973

29th December, 2009, 02:00 AM

Hi my friend.
TM 6800 is better than Tm5400.It has Ethernet for internet.
Tm 6900 combo is same as Tm6800,but it has Freeview tunner.
See this www.technomate.co.uk (http://www.technomate.co.uk)
See you! Good luck

Ryanski

5th January, 2010, 11:16 PM

:thrasher:

arnoldas

9th April, 2010, 01:56 PM

Many Thanks

bsnake

10th April, 2010, 12:37 PM

is that for technomate 5200d?

mimo01

10th April, 2010, 04:33 PM

merci very much

billfromvt

31st May, 2010, 10:31 AM

Hi Guys,

I have lost all my free to air channels, itv, c4 etc. I am using astra 2d on 28.2 East. I can get most other stuff, cbs action, reality, bbc news, sky news etc.

I have tried to download the patch on this thread but I keep getting a blank screen.

Is this the latest patch and do I need a soft cam as well.

Thanks guys

Manic01

31st May, 2010, 10:43 AM

If you have lost fta channels, either your dish is misalligned or your lnb needs replacing.
But first check f connectors are ok on lnb end and stb end.

billfromvt

1st June, 2010, 07:54 AM

Tried that, even changed the LNB to see if that made a difference. Dish is lined up correctly as can receive everything except itv, c4,c5 etc, these channels come up with the error scrambled channel

mdt

1st June, 2010, 11:50 AM

Tried that, even changed the LNB to see if that made a difference. Dish is lined up correctly as can receive everything except itv, c4,c5 etc, these channels come up with the error scrambled channel
the uk freesat channels broadcast from these transponders,

10.714.h.22000.5/6
10.729.v.22000.5/6
10.758.v.22000.5/6
10.773.h.22000.5/6
10.788.v.22000.5/6
10.803.h.22000.5/6
10.818.v.22000.5/6
10.832.h.22000.5/6
10.847.v.22000.5/6
10.891.h.22000.5/6
10.906.v.22000.5/6

the channels on freesat are fta and the itv/c4/c5 channels you are receiving are the seperate n*s encrypted versions which are part of the bskyb package. if your system is working fine as you say then try a manual txp scan of these txp,s searching for "free-to-air" channels only. regards mdt

billfromvt

1st June, 2010, 06:02 PM

Hi MDT,

Thanks for the info, will that be the same for astra 2 on 28.2 east??? I live in Bulgaria

Thanks,

Bill

npire1

1st June, 2010, 07:40 PM

Hi not sure if you already know but if your just getting cbs, bbc news etc as mentioned your receiving only the transponders on the wider astra beams (2a and 2b) You are not getting the tightly focussed uk 2d beam which would be harder to align your dish to.
I am in slovakia and have given up on trying to get 2d even with my 2.4 meter dish. If you got 2d reception before then its prob your dish alignment. the itv c4 & c5 scrambled channels your getting are not on 2d and require a freesat from sky card (?20.00 + valid uk address )

billfromvt

2nd June, 2010, 11:07 AM

Thanks for the reply, I already have the ?20 card and all was working well, so you may well be right I will have to get someone out to realign the dish

dick b

2nd June, 2010, 12:05 PM

you can get all the FTA channels including itv,ch4 and five without any card in the 5300d.you only need the ?20 card in a sky box and even then you can use the "add channels" menu to receive them.

billfromvt

2nd June, 2010, 12:37 PM

Thanks dick d,

I have tried to scan every thing and still get the scrambled channel message. Any tips you may have would be great, bear in mind that I live in Bulgaria and am using astra 2 d

Manic01

2nd June, 2010, 01:32 PM

Astra 2d FTA Channels

10714 H 22000

Channel 4 London
Channel 4 South & East
Channel 4 Midlands
Channel 4 North
Channel 4 Northern Ireland
Channel 4 Scotland
Film 4
Film 4 +1
More 4 UK +1

10729v 22000

E4 UK +1
E4 UK
Channel 4 London +1
Channel 4 South & East +1
Channel 4 Midlands +1
Channel 4 North +1
Channel 4 Northern Ireland +1
Channel 4 Scotland +1
More 4 UK

10758 V 22000

ITV 1 London
ITV 2
CITV (07-19)
ITV 4
ITV 1 Granada
ITV 1 Anglia North
ITV 1 Central West

10773 h 22000

BBC One London
BBC Two England
BBC Four (20-04)
CBBC (08-20)
CBeebies UK (07-20)
BBC Three (20-05)
BBC One Northern Ireland
Five (Region 2)
@ BBCi

10788 V 22000

BBC One West Midlands
BBC One North West
BBC One East Yorkshire & Lincolnshire
BBC One Yorkshire & North Midlands
BBC One East Midlands
BBC One East

10803 h 22000

BBC One Wales
BBC Two Wales
BBC One Scotland
BBC Two Scotland
BBC Two Northern Ireland
BBC Radio 5 Live
BBC Radio 5 Live Sports Extra

10818 v 22000

BBC One West
BBC One South East
BBC One South
BBC One South West
BBC One North East & Cumbria
BBC One Oxford

10832 h 22000

ITV 1 London
ITV 4 +1
ITV 1 Wales
ITV 1 Westcountry West
ITV 1 Westcountry South West

10847 V 22000

BBC One Cambridge
BBC One Channel Islands
BBC HD UK

10876 V 22000

Sky Travel

10891 H 22000

ITV 1 Border
ITV 1 Tyne Tees North
ITV 1 Meridian South
ITV 1 Meridian South East
ITV 1 Anglia South
ITV 1 Yorkshire West
ITV 2 +1

10906 V 22000

Channel TV
STV North
STV West
STV East
Ulster TV
ITV 3
ITV 3 +1 (19-07)
Talk Sport

dick b

3rd June, 2010, 01:11 PM

hello mate,
the scambled message does sometimes show on these boxes if for some reason it can"t pull them in.it could be an alignment/dish size issue.

wolfhunter

14th June, 2010, 08:48 PM

I am new in here. I was trying to Download a patch but i could not. i was asked to have post first. I don't know what to do. can anyone help me please??

many thanks

dick b

15th June, 2010, 01:13 PM

I am new in here. I was trying to Download a patch but i could not. i was asked to have post first. I don't know what to do. can anyone help me please??

many thanks

we need to know what you want to do and the exact model of your stb

Skrunkie

16th June, 2010, 09:48 PM

Hi,
I have a Technomate 5200d usb super which was patched and watching Thor. The channels seem to have been rescrambled. Is there a new patch required?

Manic01

17th June, 2010, 08:08 AM

load latest softcam.

billfromvt

17th June, 2010, 12:53 PM

mdt

17th June, 2010, 02:35 PM

Loaded latest softcam and pathes, now I have a problem with sound. If I press the TV/SAT button on the remote for sat I get a loud buzzing noise, if I press TV and this is on the display of the box the sound works perfect. Is there something else I need to update the box with.

Thanks guys

there seems to be a few small bugs in the latest patches so i would go back to a earlier stable patch and then re-load the latest softcam. regards mdt

matt.555

17th June, 2010, 08:54 PM

wot should i get with this patch please help thanks:stupido:

berniescity

27th June, 2010, 05:54 PM

my thor is now scrabled expect freeview could domeone please post new patch and softcam for 5200 usb super technomate

billfromvt

27th June, 2010, 07:46 PM

there seems to be a few small bugs in the latest patches so i would go back to a earlier stable patch and then re-load the latest softcam. regards mdt

Nah, still got the same problem, I knew I shouldn't have doe a factory reset

Thanks though for the patch

mdt

27th June, 2010, 08:58 PM

my thor is now scrabled expect freeview could domeone please post new patch and softcam for 5200 usb super technomate

here m8, load this patch and make sure digi-tv is switched off in the menu,s and then either load the softcam or enter the key manually via remote. regards mdt

thanks to dick b for the softcam

sada

29th June, 2010, 06:53 PM

:wink:thanks everything

marwan 37

9th July, 2010, 09:50 PM

thanks alot:coffin:

marwan 37

9th July, 2010, 11:20 PM

thanks alot

marwan 37

9th July, 2010, 11:23 PM

hello there can some one tell me why i can't download the patch?
i'm new here and i really tried every thing

mdt

9th July, 2010, 11:30 PM

hello there can some one tell me why i can't download the patch?
i'm new here and i really tried every thing

hi m8,try again in the morning! regards mdt

marwan 37

9th July, 2010, 11:34 PM

models ** TM-5400 CI+ USB & TM-5600 CI USB
? FTA + 10,000 Channels + USB 2.0 with: PVR Ready for Record & Playback of Channels, Music/JPEG & Software/Channel List Download + Component (YPbPr) Output + Blind Search + Sensitive Tuner + Optical SPDIF Digital Audio + USALS/DiSEqC 1.2</B>

tereza

10th July, 2010, 10:35 PM

Im looking for the TM 5200 USB Super patch. Where can i find it for free? Cheers

dick b

11th July, 2010, 11:26 AM

Im looking for the TM 5200 USB Super patch. Where can i find it for free? Cheers try this one thanks to the "ferret"

Manic01

11th July, 2010, 11:42 AM

All tm patches as they become available are here at the TM download centre.
Download center (http://download.for-better.biz/bbs/list.php?board=tm5000)

catta81

22nd July, 2010, 11:13 AM

Hello, I have a 5300+ was ok untill this morning when started to say scrambled channel? What happen ? Can somebody give me an idea?

benny/9

22nd July, 2010, 11:21 AM

Hello, I have a 5300+ was ok untill this morning when started to say scrambled channel? What happen ? Can somebody give me an idea?
*************************************************
have you loaded the latest tm softcam to update the keys

catta81

22nd July, 2010, 11:26 AM

I did load but i dont know what is it, I think is a patch....:(..

catta81

22nd July, 2010, 11:35 AM

Hello, I found the key and now is working. How often do I need to do this?

Manic01

22nd July, 2010, 11:49 AM

When they change of course, also make sure auto update is turned off on Digi TV.
Menu-options -Digi TV-Off-exit and save.

catta81

26th July, 2010, 09:06 AM

hello,
can somebody explain to me why channels what was ok last week now are scrumbled?

dick b

26th July, 2010, 01:05 PM

hello,
can somebody explain to me why channels what was ok last week now are scrumbled?

here is latest key but I didnt think that they had changed for a while.

kellyssoftcam

4th August, 2010, 02:58 PM

Patch would this still be the valid patch for Digitv. And does asnybody know if Nag3 will get cracked.

heddi

14th August, 2010, 11:40 AM

Hi
does anyone have a loader for my technomate TM5500 D Super?

thanks

benny/9

14th August, 2010, 12:54 PM

Hi
does anyone have a loader for my technomate TM5500 D Super?

thanks
************************************************
is that the right model your asking about mate?
the last official software for the tm 5500D was in 2003
this is a very old model or do you have a new tm 5000 model
if so which one?

Dustie

20th August, 2010, 10:58 PM

pauljo

21st August, 2010, 07:48 AM

what sat does patch work on ie hotbird etc thanks

Manic01

21st August, 2010, 09:36 AM

Latest patch for 39e bulsat

Manic01

21st August, 2010, 09:39 AM

Hi I am as thick as a plank when it comes to finding the patch and software for my TM 5300 D+USB PVR Ready,I can se some patches and software but am rather nervous in making the right choice can some kind person give me the correct ones for this model,and I think I may have posted in the wrong section I am sorry if this is so Thankyou.
If your model is the super version (it will be wrote on front of receiver)
Then this one
Select bottom zip file of the 2
Download center (http://download.for-better.biz/bbs/reply.php?board=tm5000&num=8)
If it's non super ie no super wrote on front of receiver
This one
Bottom zip file
Download center (http://download.for-better.biz/bbs/reply.php?board=tm5000&num=8)

Dustie

21st August, 2010, 12:32 PM

Thanks for this,I do not have the super,the only stuff I have on this receiver is the original Technomate download of last year,dont I need the latest software and patch thats both of them in winrar form or zipp,as the download you pointed out to me is one stb file when downloaded ?? .. if all I need is this one stb file can I go ahead and load it from a usb stick is that correct. Thanks again..

bosvelt

21st August, 2010, 03:09 PM

the .stb file is the patch load that first then load the latest softcam

Dustie

21st August, 2010, 04:01 PM

Cheers for that all I have to do now is find the softcam for the above,trouble is as we all know load the wrong one and you might have a door stop on your hands,I will get use to this site sooner or later and find where things are.

bosvelt

21st August, 2010, 05:06 PM

this is the latest sofcam

Dustie

21st August, 2010, 06:17 PM

Thanks so I can transfer the above by usb into my technomate,I will se how it goes later,just one question the technomate original download from there site was sometime last year in August which fixed a few things like transponders and channels etc etc.
Does this above patch include the updated transponders with channels and satellite positions,or is there a separate software download for this model for the updates thanks again..

thatguy

21st August, 2010, 06:23 PM

bosvelt

22nd August, 2010, 05:12 AM

you add transponders yourself in sat set up menu here are the bulsat 39E, 12688 H 30000, 12647 H 30000, 12565 H 30000, 12524 H 30000

bignose

22nd August, 2010, 05:36 PM

iv loaded latest soft cam and patch but still nova sport on 39e not openning any ideas would be great.

Dustie

23rd August, 2010, 08:52 PM

Quote
Originally Posted by Dustie http://www.digital-kaos.co.uk/forums/images/styles/digital/buttons/viewpost.gif (http://www.digital-kaos.co.uk/forums/index6.html#post736919)
Thanks so I can transfer the above by usb into my technomate,I will se how it goes later,just one question the technomate original download from there site was sometime last year in August which fixed a few things like transponders and channels etc etc.
Does this above patch include the updated transponders with channels and satellite positions,or is there a separate software download for this model for the updates thanks again..

************************************************** ********************

Thanks guys you know who you are,all went fine except my key which is used for portable Apps in windows took a little time to initialize with the Technomate.no problem with Nova Sport all works fine,now to find other patches for Sats in the West area any ideas,thats if there are any,thanks again lads for the fast reply.