PDA

View Full Version : chip tuning astra g 1,7dti



Lukas1983
3rd December, 2010, 06:09 PM
I greet all. I first of all wanted to greet with you and from mountain to apologize for my English.



I want to to play away and to modify in aster one's ECU and all this under control of system windows 7 64 bit.
Unfortunately near test of lecture the ECU near 66% jumps out me the error with announcement that I have something to make by 1sek. About what does it in this walk??


I would ask about help near modification of maps also, if I ask this possible this step after step to support me in measure your possibilities.
I greet, ***321;ukasz.

ominimicu
3rd December, 2010, 09:15 PM
First What tool do you use to read your car?

Lukas1983
4th December, 2010, 06:26 AM
First What tool do you use to read your car?


interface Galletto 1260

mariooo
4th December, 2010, 08:09 AM
interface Galletto 1260


With little cock you can also read? I remember that car you can just write! are you sure that you can read ECU mounts and what year is the car you need to change?

ominimicu
4th December, 2010, 11:16 AM
Post the file that you extracted from the ECU. if you managed to exctract any

Lukas1983
4th December, 2010, 12:17 PM
this will write so, Astra then model with 1999 year from engine 1,7 dti and driver DELCO. I am sure it that was can read from ECU map because some 3 months was install chip ago. Guy to this aim arranged original programme from ECU and he altered him. Astra has 93km at present and 201NM.
I wanted to to play away programme and to modify him more yet.

Lukas1983
4th December, 2010, 01:07 PM
I found in records technical galletto just:

Astra G 1.7 16V DI EDC15M Only Write

you will Help me her to modify OK I on plate cd from galletto found probably original mape to 1,7 dti,?
I have 93km at present and 201Nm
I would want to get 100km and 220Nm?
It will give advice?


http://images45.fotosik.pl/390/70f60b1bbf173a6em.jpg (http://www.fotosik.pl/showFullSize.php?id=70f60b1bbf173a6e)

bazare
4th December, 2010, 06:56 PM
if ecu is bosch then car is 68hp and engine is x17dtl not y17dt. post here exact HW and SW number you read by identifing you ecu via OBD

ominimicu
4th December, 2010, 07:25 PM
Identify your ecu with dignosis tool, or take a photo of the sticker on the ECU. i ll give you the original file of that ECU, taht you can mod your way and just write it.

Lukas1983
4th December, 2010, 09:19 PM
my motor this y17dt. I know with what I go, this should be by factory 75km and 165Nm.
I will make tomorrow and I will put picture ECU

nickflorin2001
4th December, 2010, 10:09 PM
how can i find out if i have y17dt or x17dtl?

ominimicu
4th December, 2010, 11:03 PM
the car s techical doc

Lukas1983
5th December, 2010, 09:48 AM
to be visible all here - engine this 1,7 DTI 16V 75KM ISUZU

To make a mistake ISUZU 75KM hard and engine oplowski 68KM

bazare
5th December, 2010, 03:47 PM
Well ECU is DELCO lpv4 SW DCWB.
Here is the original ... I have done several of these. From what I know this ECU doesn't support cruise control function.

vis1935
4th November, 2020, 10:28 PM
It supports cruise control, if somebody don't have can do mode, its quite easy 4 cables, and opcom

dtip
4th November, 2020, 10:53 PM
It supports cruise control, if somebody don't have can do mode, its quite easy 4 cables, and opcom

You aware that you are replying to 10 years old thread?

davinci dpf remover (https://www.digital-kaos.co.uk/forums/showthread.php/859834-Renault-Megane-4-(2018)-Blade-key-model)

vis1935
5th November, 2020, 11:09 AM
yes, the point is that someone can make a mistake after reading it