Mercedes W211 How is possible??

[Rito]

Mercedes W211 year 2006 model:220CDI.

I do:
-Dash
-EZS
-ZWG
-Errors scan

ZWG, whit diga-pro have 2 stores oil and service, I do all 2 places.
Costumer go to Mercedes dealer and can see last oil change
How it?s possible if i do all stores??

Thanks

[mercis]

you can with star diag dev mode update zgw(read DKforum)
or use 912/9S12/9S12X Programmer V1.54

[markony79]

This car have Assyst and Assyst plus, its memory history
for oil change ,days after oil change ,drive and kilometras...
Try to see

S7.5 Mercedes Benz ASSYST explorer (http://www.codecard.lt/carprog/software/carprog-dash/s7-5-mercedes-benz-assyst-explorer/prod_118.html)

[markony79]

And for all this charge minimum 400e for job

[Rito]

you can with star diag dev mode update zgw(read DKforum)
or use 912/9S12/9S12X Programmer V1.54


But whit diga-pro have tow this options for change in ZWG.
oli service and service............
I din?t understand why had stil store oil...????

[milanista]

But whit diga-pro have tow this options for change in ZWG.
oli service and service............
I din?t understand why had stil store oil...????

I suppose DIGA is doing it by OBDII? Please, note that there are replenishments and all sort of stored information that has mileage. I guess DIGA is not doing a good job. If you have the EEPROM dump from before and after DIGA changed the oil service history I can tell you how it is possible.

[Rito]

I suppose DIGA is doing it by OBDII? Please, note that there are replenishments and all sort of stored information that has mileage. I guess DIGA is not doing a good job. If you have the EEPROM dump from before and after DIGA changed the oil service history I can tell you how it is possible.

Diga-consult (old machine) have this option OBD but not do it OBD..
Diga-pro (New machine) do it via dump...
I do it via dump But in Mercedes Dealer can see last oil change........

One friend my says need to do it manual in dash 5 times??
Someone can confirm ??

[markony79]

No,
ex. your car have 180xxxkm, that mins that have minimum
9 oil replacment and about 14 services,
Like servis A,B,C,D, E, F....

every service have own kilometers and day for changing..
see on reply what I post before, codecard.lt

[T72]

Diga-consult (old machine) have this option OBD but not do it OBD..
Diga-pro (New machine) do it via dump...
I do it via dump But in Mercedes Dealer can see last oil change........

One friend my says need to do it manual in dash 5 times??
Someone can confirm ??
its dificult to calculate all service history for MB corect, thats why Codecard assyst exployer cost 800e! Your china mashine is shit, and I think you must be happy that you still have working ZGW!
And after history corection with good tool, we must check this with star....

regards

[Rito]

its dificult to calculate all service history for MB corect, thats why Codecard assyst exployer cost 800e! Your china mashine is shit, and I think you must be happy that you still have working ZGW!
And after history corection with good tool, we must check this with star....

regards

Friend I have original tools..
But Enigma not do it..
And I need looking for others options..
My friend had diga-pro (new diga original) and have this option but I don?t know not why whit ZWG outsid read and writ correct and in ZWG in car see old value.............

[T72]

Friend I have original tools..
But Enigma not do it..
And I need looking for others options..
My friend had diga-pro (new diga original) and have this option but I don?t know not why whit ZWG outsid read and writ correct and in ZWG in car see old value.............
yes Enigma verry bad for MB ...
I do this job with dp3 by obd, rewriting all historry...
to understand architecture of MB service history, must to spend a lot of time with star, and play with calculators like assyst exployer from Codecard(I think its a best). It is verry easy to make logic mistake, and some one can find your mistakes with star...

[milanista]

Diga-consult (old machine) have this option OBD but not do it OBD..
Diga-pro (New machine) do it via dump...
I do it via dump But in Mercedes Dealer can see last oil change........

One friend my says need to do it manual in dash 5 times??
Someone can confirm ??

In this car there is no service history stored in the dash! All the service history information is stored in the ZGW!
If you send me the dump of the ZGW I can tell you which odometer value was not updated correctly.

[TULGEYWOODMAN]

Unless you have star developer, you play russian roulette with merc!

with star developer [or codecard] you do job correct
advantage with star developer is you can check better than dealer!:wavey:

[Rito]

yes Enigma verry bad for MB ...
I do this job with dp3 by obd, rewriting all historry...
to understand architecture of MB service history, must to spend a lot of time with star, and play with calculators like assyst exployer from Codecard(I think its a best). It is verry easy to make logic mistake, and some one can find your mistakes with star...


If you says codcard is best for it and you do it with DP3 my question is:
This job with DP3 is perfect??

Thanks

[T72]

If you says codcard is best for it and you do it with DP3 my question is:
This job with DP3 is perfect??

Thanks
if we talk about dump calculators, yes Codecard is the best! DP3 do this job by OBD, so we must do ezs directly, but all other work by OBD.
Am I answer to your question?

[Rito]

if we talk about dump calculators, yes Codecard is the best! DP3 do this job by OBD, so we must do ezs directly, but all other work by OBD.
Am I answer to your question?


Yes, Enigma do it OBD but only assyst not oil service...
DP3 is good in mercedes........
I need find solution for this costumer but in dealer not do it for me only If I bay new ZWG...

Thanks

[milanista]

Yes, Enigma do it OBD but only assyst not oil service...
DP3 is good in mercedes........
I need find solution for this costumer but in dealer not do it for me only If I bay new ZWG...

Thanks

Post the dump from the ZGW and I will tell you how to modify the dump.
And one more thing - codecard is not the best and codecard can't read the ZGW dump by OBDII!

[TULGEYWOODMAN]

Surely, nothing can compete with star developer?:wavey:

[Rito]

For information:

I don?t know If this result but can try;

[abdulrauf]

please, help me check the dump for any possible damage. the dump is for E240 2004 model, i read the dump using ak400 without editing or reprogramming, but when i re-install back the eis the keys stop working.
thanks in advance .

[maumaumau]

your dump is incorect...is a garbage data...maybe your tool destroyed the mcu or corrupted the dump...big trouble...now you have several options:
1 - you need a good programmer(ETL or X-PROG-M with autorization for this type of mcu, because mcu is secured) and a working dump or maybe a virgin dump and after a diagnostic tool (star diagnosis) to match ezs with car
2 -you need enigma tool, working(virgin) dump and diagnostic tool to match ezs with car
3 - a lot of money,buy a new or used ezs(i heard that it is not possible without take the car to a dealer),match ezs with car using diagnostic tool
4 - take the car to a dealer and pay the bill(again a lot of money)
option 1 and 2 is possible only if ezs-mcu is not yet destroyed