VAS 5054A V18

[viw9419]

. . . . . .

[Patrian]

I have just bought the hardware but the software on the memory card was corrupt. they have given me download links and of 11 parts number 4 doesn't seem to download.

Can anyone else see if it downloads for them?

Or if anyone has part 4 I would be grateful of it.

I will repackage the files when I have them into base CD, Audi, Seat, Skoda, VW, and reupload so that others may download.

Just need part 4.

Hello there... :ciao:

Well, i advise you to read with ATTENTION DK :rulez:, ALL the Sticky's about Garage Section and now IMMEDIATELY to remove your stuff's from your post, because did you know what meaning the word "Ban"????? :)

Regards!

[viw9419]

. . . . . .

[drakov]

Do not post keygens in any form or links in the garage section

Which can be found HERE (http://www.digital-kaos.co.uk/forums/f5/forum-rules-2/)

Also on DK we prefer to keep all posts and links (if allowed) in there specific sections, as we don't have a Auto Software section at this time there is nowhere to post anything, unless you think members can post what they want wherever they want?

[viw9419]

. . . . . .

[jnp1908]

I thought so too VIW9419, but if we are told that

'' we don't have a Auto Software section at this time there is nowhere to post anything, unless you think members can post what they want wherever they want?''

Obviously the ''General Automotive Help and Discussions'' forum is not for general automotive help and discussion now. I got it off flea bay, as gave up with finding links for corrupt software. Seemed expensive and when I installed it none of the 3 heads I had bought would work ( i knew 2 would nt as theywere crap )!!!! ... Just be sure it will work with V18 in the first place, why not get hold of lower version which will be easier to search and find, and test interface. Have had 4 in last 12 months, only 1 works with V18, as others wont pass security. 2 do upto V15, and give errors all the time, and the one that I used and works with V16 for last2 months failed as soon as I installed v18 - just get message '' device not able to read serial check'' error message, the same message all 3 heads i had. Ended up paying ?469 from disk supplier but got 18 mths warranty, and local supplier, and ?50 off as they supplied me the software first which would not work with the heads i had....but at least everything is working just fine now with perfect operation. Try Asking your supplier for another copy of the version, or try older version which is easier to find software for, and make sure heads okay before wasting more time, or keep searching. From experience most sellers dont have a clue what works and what does not. And most cant be contacted or are to far away. good luck.... hope the garage opens soon here

[viw9419]

Got the software from a guy in China, I have spoken to him on the phone a few times and again today he promises to sort it out but we will see.

I also dislike people just leeching from the forum without giving back and so once I have all the files I will quite happily burn onto disks for the guys that want them or upload somewhere.

Every little helps.

[viw9419]

. . . . . .

[kaanm]

Is there a Turkish software? please :(

[my-]

:D
Is there a Turkish software? please :(

Pm at adamim

[lzh2011]

I have just bought the hardware but the software on the memory card was corrupt. they have given me download links and of 11 parts number 4 doesn't seem to download.

Can anyone else see if it downloads for them?

Or if anyone has part 4 I would be grateful of it.

I will repackage the files when I have them into base CD, Audi, Seat, Skoda, VW, and reupload so that others may download.

Just need part 4.

Do you have the site to download V18 in German ?

[nice06]

Hi ,
Any french version download for vas 5054A please ?
Thanks in advance

[nafa]

I have the vas software in english but I d?nt now to share in forum



I have the hardware but the software on the memory card is corrupt. they have given me download links and of 11 parts number 4 doesn't seem to download.

Can anyone else see if it downloads for them?

Or if anyone has part 4 I would be grateful of it.

I will repackage the files when I have them into base CD, Audi, Seat, Skoda, VW, and reupload so that others may download.

Just need part 4.

[dirk32]

Can I describe one as I packed a control device with the 5054A Flash, have sometimes the files in SIDIS / home / datflash, but the point 019 to update it does not show me. I?ve mount the mount flash disc to, but no Chance
My Car ist a Golf 6 GTI MJ 2010. I wont Update Zentralelektrik from Software version 0541 to 0575, the 0575 is on the DVD059 Otherwise I can do anything!
How do I get through it?