MB DAS -> EOL(power) and V-MAX for Truck&Bus

[SadCriss]

Hello,
If any one need help whit the EOL power modul for Truck and Bus and V-MAX in Mercedes Benz DAS please let me know I can help.

Not posted here because some reasons and Rules.
If any one need it please just ask for it.

[SadCriss]

Please not forget to leave here your email adress.
And please post them here not on private.... it is ok.

Regards

[tezas81]

hello my friend have you eol for bus?

[SadCriss]

hello my friend have you eol for bus?


Yes I think can work on buss too.

[SadCriss]

@ pesona

Please Check your Email/P.M

Dont forget to press the ......

Regards

[SadCriss]

@ jimis

Please Check your Email/P.M

Dont forget to press the ......

Regards

[SadCriss]

@ nelsonbyte

Please Check your Email/P.M

Dont forget to press the ......

Regards

[SadCriss]

@DigitalDiag

Please Check your Email/P.M

Dont forget to press the ......

Regards

[SadCriss]

@ kerekt
Please Check your Email/P.M

Dont forget to press the ......

Regards

[SadCriss]

@ elektro
Please check your email/p.m

Regards

[SadCriss]

@ bouzimeca (http://www.digital-kaos.co.uk/forums/members/75370-bouzimeca/)

Please cehck your email/p.m

Regards

[SadCriss]

@ Maroi32

Please check you email/p.m.

[SadCriss]

About changing the values

I hawe change them only little by little whit 0.40 0.50 more. for example 0.92+0.50=0.970 or 1.20+0.40=1.60

Becarefull it is dangerous if give to big value

[jannis]

About changing the values

I hawe change them only little by little whit 0.40 0.50 more. for example 0.92+0.50=0.970 or 1.20+0.40=1.60

Becarefull it is dangerous if give to big value
can send to me also

( removed addy)
thanks

[jannis]

About changing the values

I hawe change them only little by little whit 0.40 0.50 more. for example 0.92+0.50=0.970 or 1.20+0.40=1.60

Becarefull it is dangerous if give to big value
can send to me also

( no addys to be posted )
thanks

[cocoh]

Hello,
If any one need help whit the EOL power modul for Truck and Bus and V-MAX in Mercedes Benz DAS please let me know I can help.

Not posted here because some reasons and Rules.
If any one need it please just ask for it.
Hi..
may I have it?
( no addys to be posted )

tank you..

[my-]

Send Pm eol here :D

[georgos!]

please send to me

[anemos]

Please send me to!

[catmusco]

Please send me too

[lming]

Plz pm me also. thank you.

[junior.manager]

How it works him to DAR
my email is junior.manager @ hotmail.com

[diaboliko23]

Hello, can i also have infos about EOL. thx

[mrgaga]

Please send me too

[deusbrest]

Please send me too

[stegianduia196026]

Please send me too

[tezas81]

please send me too

[pikus_m]

please send me too

[joseph2947]

Hi:
May I have it?
Thanks.
Best Regard

[dieselequipos]

please send a info thanks

[xbccv22]

Hi....it's a great info
I'm soo curios to know
can i have it too...

[frayer]

Please help me with this tool. Thanks

[van333]

Hello, please can i also have infos about EOL. thx

[RudiRuessel]

Hi, I need this EOL-stuff too. Thank you.

[anemos]

Please help me with this tool. Thanks

[Serhio632]

Please for me too.

THanks!

[OBDlab]

Please send me to pm. Have you instructions for install?

[willxxx]

Please send me also to pm please.

[ant21000]

Please send me too !!:)

[milanc]

Please send me too

[wsc]

Mates i do not know if this member shared with you this tool...
Anyway here is WITHOUT pass
By Mr Visroni

[georgos!]

I used eol to the bus but there not works!!!There is something similar for bus?

[georgos!]

There's nobody here!!!!!!!!!!!!!!!!!!!!!!

[vedat]

eol new version there eol2 s?pper tork for info e-mail ( no addys :rulez: )

[wsc]

eol new version there eol2 s?pper tork for info e-mail


mate if u have something to share do it
i cant see the resone to mail u or i am wrong ???????:evil:

[antvorskov2006]

Please can i also have infos about EOL. Thanks

[Bazil_mb]

Hi,
Please send me information about eol module

[arab]

Mates i do not know if this member shared with you this tool...
Anyway here is WITHOUT pass
By Mr Visroni


hello
dear friends

it is not full version EOL . If any require.
i can exchange with ptt volvo devtools keygen.
best regards

[arab]

Mates i do not know if this member shared with you this tool...
Anyway here is WITHOUT pass
By Mr Visroni

hi
dear friends
its not full version .if anyone require.
i can exchange with volvodevelopetools.

thanks

[MJPOWER]

Hi,

Also send me the info

Thanks In Advanced

[travegoactros]

Hello, Hello.....

:D yes, i want it too. Thanks from Germany.:pcguru:

[bruno1981]

hi
dear friends
its not full version .if anyone require.
i can exchange with volvodevelopetools.

thanks

Hello my friend, can you send to me.
I really need volvodevelopetool.
Cumps.

[Visroni]

Mates i do not know if this member shared with you this tool...
Anyway here is WITHOUT pass
By Mr Visroni

heh
that was sold all over the world, and i got zero money for it ;-)

[arab]

Hello my friend, can you send to me.
I really need volvodevelopetool.
Cumps.


hi
my freind
i have eol full version . so i can it exchange with volvodevelopetool.

best regards

[bruno1981]

hi
my freind
i have eol full version . so i can it exchange with volvodevelopetool.

best regards

Hello,
i'm sorry but can you tell me what is EOL ?

[wsc]

heh
that was sold all over the world, and i got zero money for it ;-)

you are right mate and i am sorry for all of them

[ototest]

Hello ,
if possible i want to EOL free .. Regards.

[mrgaga]

Please for me too.

[Misiur]

Also send me the info

Thx

[erniez]

Can I have one too? ;) Cheers.

[bagitorr]

Hi,
please can i also have infos about EOL.
thx

[ant21000]

Hi my friend, I need help whit EOL and Vmodule to, Thanks !!

[zcc]

Hi,
please can i also have infos about EOL.
thx

http://www.digital-kaos.co.uk/forums/f152/mercedes-atego-lkw-speed-limiter-226788/#post1254926

[SadCriss]

Hello,
I am back now and happy to help If I can.
Apolegise for my absence but I had some problems... in the past.
Ask for other problems too like: DAS,Xentry,WIS,Black list etc... for instal problems.


Best Regards
Criss.

[Oleg373]

Hi.
Help, please with the staff
Correction for EOL the ACTROS 1843 1999year.Thanks!

[tsoylos]

Can you sent me please the Eol

Thank you.

[czester]

Hello my friend, can you send to me.

[sunduk112]

Hello my friend, can you send to me 10x.
( no addys :rulez: )

[SadCriss]

Can you sent me please the Eol

Thank you.


Check email please.

[SadCriss]

Hello my friend, can you send to me.

Email please?

[SadCriss]

Hello my friend, can you send to me 10x.



Email sent

[SadCriss]

Hi.
Help, please with the staff
Correction for EOL the ACTROS 1843 1999year.Thanks!


Not shure about that old years I did not work to much on them but give me email adress and I send you "staff"

[DB_member]

I've never worked with a truck but I found some EOL stuff and tried it. Is this supposed to work with simulation mode or only when the diagnosis tool is connected to a real vehicle?

I did not find the menus in simulation mode that example videos had.

Is the "fix" the same for all releases? I found some screen shots from 07/2011 and some from a 2009 release?

[SadCriss]

I've never worked with a truck but I found some EOL stuff and tried it. Is this supposed to work with simulation mode or only when the diagnosis tool is connected to a real vehicle?

I did not find the menus in simulation mode that example videos had.

Is the "fix" the same for all releases? I found some screen shots from 07/2011 and some from a 2009 release?


Hello,

In simulation mode you can not find it. I hawe try too but not there. I dont know whi.

I hawe make some screen pics too on atego if I remember whell.
I hawe to find them and show to you.

The menu need acces befor make the short test on truck.
Need to be acesed from the first menu list where you find the ecu's .... select model year........ and before pres the short test buton you find other menus there to acces ecu directly there you can use it.

[SadCriss]

Here it is...

[anemos]

Do you have a reference table? As far as possible to increase the value EOL? You can reply to e-mail ( no addys :rulez: )

[akacia66]

Hello
I want to make a correction EOL AKTROS 1841-2004. year
Can be adjusted in 1844?
Thank you.

[czester]

Hello my friend, can you send to me.
( no addys :rulez: )

[prgrm]

can you send to me

thanks
( no addys :rulez: )

[akacia66]

Hello, can you send to me.
( no addys :rulez: )

[petr78rus]

( no addys :rulez: ) thanks

[gmb45]

no email addresses to be posted :rulez:

[SadCriss]

Hello,

@ DB_member , milanc , Oleg373 please check emails.

[SadCriss]

Please send me P.M whit your email adress.
I can not see them here at all. Tese are the rulez.
Please understand.:rulez:

[prgrm]

can you send to me

thanks. check your pm

[SadCriss]

Hello,

@ billboard , shacky , prgrm

Please check email..

[luisitoeik]

hi m8,,,

can u send me to mee

please,,,

[dimitar22]

Hello


I have one question is it possible to use my cardaq plus interface with das or Xentury software in order to diagnose MB trucks?

Cables are not problems i have pinout from interface and truck.

How to configure software to recognize this interface?


You can see the interface here

CarDAQ Plus (http://www.drewtech.com/products/cardaqplus.html)

[charlie-h]

Lads, tread lightly!

If you set the values too high you will blow the turbo and pump units, or maybee hole a piston!

We are talking about ?big money here with these engines.

The correct way to use the EOL is on a dyno rolling road and then to slowly tweak upwards untill the correct BHP is acheived for the particular vehicle.

Use EOL at your peril.

Mercs may be selling more engines when people use this adjustment.

This is why it was chip card protected!

Good luck

[sozberk]

me too pls

[georgos!]

I used eol to the bus (tourismo) but there not works Unlike the truck works fine!!!There is something similar for bus? I speak only for eol not for speed maximum

[OBDlab]

and me pls cardiagzt@gmail.com

[Werner1807]

Please help me with this tool. Thanks

[cicko]

and me pls cicko1@teol.net

[Dreamer001]

Please send me also the Info.

THX

[ahadi]

hello ,

May I get , please .

[cheester]

Maybe this is stupid question, but can someone explain how to use EOL?
Has to be develop version or its working on normal DAS aslo?

[Tachotony]

Hi Sadchriss

Yes wen possible i wil much more info where must i copiier this files in wich Map i see chipcard and common
but where in Das or Star ?
Thanks in Advance
Tonny

[Zake]

Please send them to me too...eol and speed limiter.


Many thanks,


And best regards.

[petr78rus]

petr78rus@bk.ru
Many thanks

[charlie-h]

How about all the people who have used EOL posting the results that they have had.

Good, bad, no different?

Also by how much they have adjusted the values.

Better fuel consumtion.
Worse fuel consumtion.

Also any problems that has developed since the adjustment.


Is this adjustment a small tweak or similar to a full re-map?

Any feedback wil be good!

[baltazar3]

Please send me info.
BR

[charlie-h]

How about all the people who have used EOL posting the results that they have had.

Good, bad, no different?

Also by how much they have adjusted the values.

Better fuel consumtion.
Worse fuel consumtion.

Also any problems that has developed since the adjustment.


Is this adjustment a small tweak or similar to a full re-map?

Any feedback wil be good!

Hey look, youve all got the fix for your DAS.

What about the results ??

[decode]

Please

autodiag@seznam.cz

Big thanks!

[petr78rus]

hi, everybody.
to whom sent EOL (power) and V-MAX for Truck&Bus?
throw off plz on petr78rus@bk.ru

[tittibritti]

Send me info Please :bounce:
Cheers
:beerglass:

[ntgroup]

pls, send me too

[gspeed]

194812I need speed limiter raised or removed from Atego 815, I have read 29F400, can you help?

[carself]

speed limiter in the FR module, in the eeprom

[carself]

pls can send to me also EOL

[renaultman]

hello
can you send to me
thnks in advance

[georgos!]

the eol can be used in buses like tourismo-travego?

[rapy]

Yes.
But there are different methods to the trucks. Eg speed limits using the following method:
Remove the FR ECU from the Bus.
Place the FR ECU on any Normal Actros But Not MB2!
The FR ecu have 4 connectors: X1, X2, X3, X4
We are interested ONLY x2 ( blue and yellow wires for CAN-BUS) and power 30, 31, 15
Connect ONLY X2.
If you plug X1, X2, X3, and X4 from Actros on the Bus FR ECU then the ECU will get damaged!
Then enter to DAS and Change the speed of the Actros as usual.
The data will be stored in the Bus FR ECU in this case.
Install Back the FR ECU on the BUS.
Tested method.

[georgos!]

Yes.
But there are different methods to the trucks. Eg speed limits using the following method:
Remove the FR ECU from the Bus.
Place the FR ECU on any Normal Actros But Not MB2!
The FR ecu have 4 connectors: X1, X2, X3, X4
We are interested ONLY x2 ( blue and yellow wires for CAN-BUS) and power 30, 31, 15
Connect ONLY X2.
If you plug X1, X2, X3, and X4 from Actros on the Bus FR ECU then the ECU will get damaged!
Then enter to DAS and Change the speed of the Actros as usual.
The data will be stored in the Bus FR ECU in this case.
Install Back the FR ECU on the BUS.
Tested method.

Thanks Rapy for the reply but the eol is listed in unit MR not in FR is in it ?Im interested how changing the engine torque no speed limits:top:

[rapy]

Thanks Rapy for the reply but the eol is listed in unit MR not in FR is in it ?Im interested how changing the engine torque no speed limits:top:

Hi all, I was talking about changing the bus speed limit.For trucks I think it is very clear.For those you have not yet given out the change of torque of the busses i do the following:On the menu for selected vehicle do not select buss,select TRUCK-FURTHER COMMERCIAL VEHICLES-SPECIAL FUNCTIONS.I think it is quite relevant image above.
Good luck!

[SadCriss]

Thanks Rapy for the reply but the eol is listed in unit MR not in FR is in it ?Im interested how changing the engine torque no speed limits:top:

"rapy" he explain to you exactly!!!

Nice post!

[georgos!]

will test the way.
Thank You

[poseidon]

Please can i also have infos about EOL. Thanks

[andre1969]

Hello rapy, Prompt what these numbers mean. Thanks

[rapy]

Hello rapy, Prompt what these numbers mean. Thanks
Hello,

Not specify what numbers it,but i guess it's about these numbers:
30 = Battery 24v in this case
31 = Gnd = Ground =Battery ( - )
15 = +24 v after contact=ignition on
If you mean that please specify which numbers you thought.

[charlie-h]

How about all the people who have used EOL posting the results that they have had.

Good, bad, no different?

Also by how much they have adjusted the values.

Better fuel consumtion.
Worse fuel consumtion.

Also any problems that has developed since the adjustment.


Is this adjustment a small tweak or similar to a full re-map?

Any feedback wil be good!

Can any one comment on if adjusting the EOL has made a big difference to power and by how much have the figures been changed to get good results ??

[Dyzer]

Give me pleas/////////////////////////////


A to 01/2013 fit??? Will work???

:rulez: mate

[d5alilij]

Please for me too.

[SadCriss]

Hello,

Here you hawe EOL Chipcard activation for Trucks&Bus parametrization
And other MB keys.

Contain V1 and V2 of EOL. for new and old version Das.

Pasword in P.M.


Dont forget presThanks + rep

Best Regards

Criss



https://mega.co.nz/#!kpEXzD4K!L007kYcL_JI7lPsEQzScItZvmk48kPyPbqlJYep qtL4

[fireboy0815]

password please

[cicko1]

password please

[cicko1]

password please

[andre1969]

Password please

[cocoh]

Please pass...

[choro]

please passssss......

[tas_daz]

pass please and thanks

[gerasimov]

Please pass...

[giovani]

hi.

password please

[ariel111696]

hi you can send me,thsk

[gerasimov]

password please

[ashrf1]

THANK YOU THANK YOU THANK YOU
PLS I WANT PASS FOR FILE
SEND IT TO ME BY P.M

[hugos31]

pasword , please

[orcej]

pass please. thank you

[charbel alam]

dear sir

can i have the password for EOL

my mail is:

[miko34]

Hallo can I vave password please .

[miko34]

Please password to eol chipcard activation

[Benjamin2010]

Hello Mr. Sadcriss I need your help such as working in module EOL.
My E mail is Not to be put on here :)
thanks for your support !

[diagnostamir]

pass please. thank you
diagnostamir

[sergigg]

Password please!

Thanks,
Sergi

[murganas]

may i have tha password please.thank you in advance

[alekshsa]

sent a message 4you

[lotti]

please send password
thank you

[ascotauto]

Hi can you assist me too?

[ardeon]

Hello,

Here you hawe EOL Chipcard activation for Trucks&Bus parametrization
And other MB keys.

Contain V1 and V2 of EOL. for new and old version Das.

Pasword in P.M.


Dont forget presThanks + rep

Best Regards

Criss



https://mega.co.nz/#!kpEXzD4K!L007kYcL_JI7lPsEQzScItZvmk48kPyPbqlJYep qtL4
Please send me a pass. I already pressed thanks and +rep on post #124. My email steamantas@gmail.com

[Bugo82]

Bitte senden Sie mir einen Pass.

[KISATEC]

Thanks mate
Can i have pass?
Good day to you

[dimo]

парола моля