View Full Version : Forklift Diagnostics
techtrnr
6th December, 2010, 11:09 AM
Here are a few LPG diagnostic tools
Impco LPG fuel systems
http://rapidshare.com/files/427358140/IMPCO_USB.zip
http://rapidshare.com/files/427357802/IMPCO_Laptop_Service_2004-04-05.zip
http://rapidshare.com/files/427357967/IMPCO_2007-2009_Fuel_System_Laptop_Diagnostic_Software.zip
uzara
6th December, 2010, 06:12 PM
Here are a few LPG diagnostic tools
Impco LPG fuel systems
http://rapidshare.com/files/427358140/IMPCO_USB.zip
http://rapidshare.com/files/427357802/IMPCO_Laptop_Service_2004-04-05.zip
http://rapidshare.com/files/427357967/IMPCO_2007-2009_Fuel_System_Laptop_Diagnostic_Software.zip
hi techtrnr
Thanks for share
good work
regards
edgar777
7th December, 2010, 01:52 AM
Thank you.
techtrnr
7th December, 2010, 02:29 AM
used for Nissan TB45 fuel injected 6cyl. in CAT/Mitsubishi forklifts.
http://rapidshare.com/files/427357477/MCFA_TB45_CAT.zip
:top:
Diagnostic cable for laptop MCFA part number W505010111...pricey from dealer...will try to post configuration to fabricate your own.
ukge4122
7th December, 2010, 12:49 PM
Hi Tbnr, what adapter works with the software you posted for CAT forklifts with Nissan engines?
Thanks as I need to get
Does CAT ET work with caterpillar forklifts with CAT / Mitsubishi engines?
I have 16 pin connector for CAT Comm II adapter
ukge4122
8th December, 2010, 10:48 AM
Hey Techtrnr:
I require some help i am looking for diagnostic tool to work on this caterpillar forklift machine
Model# C5000LP
Serial# AT9012246
Engine: Nissan Brand K21
Thanks as assistance will be greatly appreciated.
Will it be a caterpillar tool or nissan tool I will need to get?
techtrnr
9th December, 2010, 10:58 AM
Hey Techtrnr:
I require some help i am looking for diagnostic tool to work on this caterpillar forklift machine
Model# C5000LP
Serial# AT9012246
Engine: Nissan Brand K21
Thanks as assistance will be greatly appreciated.
Will it be a caterpillar tool or nissan tool I will need to get?
TB45 is 6cyl Nissan engine...for K21-K25 engines you will need either Cat Diagnozer or Mitsu Uptime (same tool just branded differently). I have the program but not the crack for it.
ukge4122
9th December, 2010, 08:03 PM
Do you have part number for CAT Diagnozer or Mitsubishi Uptime?
Concerning software I could get a guy to make crack for it.
Will CAT Communication Adapter II work?
Thanks as I urgently await your response.
alcoholahmed
9th December, 2010, 08:59 PM
Do you have part number for CAT Diagnozer or Mitsubishi Uptime?
Concerning software I could get a guy to make crack for it.
Will CAT Communication Adapter II work?
Thanks as I urgently await your response.
i`ve this software and i can send it to u but are u sure that u can crack its security or succeed to get its keygen?
ukge4122
9th December, 2010, 11:29 PM
Please post soft, I will ask for a keygen to be made.
This is osmething I will have to pay for so all who will want keygen will be asked to put up for it
What is the part number for the diagnostic adapter? Does anyone know the part numebr for it?
alcoholahmed
10th December, 2010, 05:10 AM
Please post soft, I will ask for a keygen to be made.
This is osmething I will have to pay for so all who will want keygen will be asked to put up for it
What is the part number for the diagnostic adapter? Does anyone know the part numebr for it?
http://rapidshare.com/files/436005980/diagnozer.rar
check ur pm for password
tortugonet
20th April, 2011, 03:39 PM
http://rapidshare.com/files/436005980/diagnozer.rar
check ur pm for password
Pleace pass for diagnozer
Thank
tortugonet
7th June, 2011, 03:10 PM
http://rapidshare.com/files/436005980/diagnozer.rar
check ur pm for password
Please.. Upload The diagnozer cat....
Thank
tortugonet
22nd June, 2011, 03:28 PM
http://rapidshare.com/files/436005980/diagnozer.rar
check ur pm for password
that data adapter cable is used? anyone have the part number to buy it.
thanks
ahmadgrt
2nd September, 2011, 08:31 PM
There is only cable used to work with Cat lifters
GSE cable (P/N: 16A68-11320)
Press Thanks if useful...
:party:
ete3000
26th March, 2013, 04:29 PM
Hi
I have the DIAGNOZER software for Caterpillar but I need the keygen, can you help?
I have found how to make the cable, I just need the keygen to work.
Best regards.
susejalejandra
25th August, 2020, 02:04 AM
Good friend, did you manage to make the diagnostic cable to scan forklifts? you got the keygen, did it work for you? I need help to make the cable and I can open the program to see if you could explain how to do it, thanks.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.