ngakson2002
7th December, 2010, 05:59 PM
Hi
Could someone help me to know(by procedure or tool recommendation) what can be done to unlock this immo?
In fact,the vehicle is a 2000 nissan ALMERA 2.2 , MODEL: FDAN16 Diesel Engine. Antitheft system: NATS 5,Transponder Key TEXAS/CRIPTO: ID 60.
Fault/problem/or symptom:The car was working well and after a stop made by the customer for shopping purpose, the car can not more start.In addition when the key is put in the ignition switch and turn to the ON position, there is 2 beep sound heart, but the red LED at the passenger side dasboard remains ON and the engine cannot start.
Diagnostic done: With the SBB Key programmer and T 300 connected to the car and access to the IMMOBILISER authorised by using the pin code 5115, the following fault code is read from the memory
1611: Immobiliser Locked or Immobiliser Module incorrectly coded.
Could someone help me to know(by procedure or tool recommendation) what can be done to unlock this immo?
In fact,the vehicle is a 2000 nissan ALMERA 2.2 , MODEL: FDAN16 Diesel Engine. Antitheft system: NATS 5,Transponder Key TEXAS/CRIPTO: ID 60.
Fault/problem/or symptom:The car was working well and after a stop made by the customer for shopping purpose, the car can not more start.In addition when the key is put in the ignition switch and turn to the ON position, there is 2 beep sound heart, but the red LED at the passenger side dasboard remains ON and the engine cannot start.
Diagnostic done: With the SBB Key programmer and T 300 connected to the car and access to the IMMOBILISER authorised by using the pin code 5115, the following fault code is read from the memory
1611: Immobiliser Locked or Immobiliser Module incorrectly coded.