PDA

View Full Version : tm softcam



mdt
7th December, 2010, 06:17 PM
bulsat key 06 updated
thanks to all concerned, regards mdt

ozzie11
7th December, 2010, 06:32 PM
Thanks MDT, but it doesnt seem to clear Bulsat??? is it me?? any one
else?

OZZ

The Lambton Worm
7th December, 2010, 08:21 PM
Its not clearing for me either.

Dule1
7th December, 2010, 08:30 PM
Its not clearing for me either.

nor me!

yes Cliff

telveskid
7th December, 2010, 08:33 PM
worth a go

bignose
7th December, 2010, 08:44 PM
not clearing for me either;-(

The Lambton Worm
7th December, 2010, 09:22 PM
Sorted thanks to Kargo.25

harryharris
8th December, 2010, 02:37 PM
does this also clear canal digital on 19.2 as thats gone down

evens
8th December, 2010, 03:02 PM
19.2 is down

telveskid
9th December, 2010, 08:49 PM
Regards everyone

josefgazi
9th December, 2010, 10:32 PM
canal ned its down

Tez2010
13th December, 2010, 07:41 PM
can someone explain how to unzip this file, when i extarct it, it comes up as file instead of key file if anyone understands ! thanks

redfanatic
13th December, 2010, 08:41 PM
the second file posted isnt opening! can someone plesae link me to the latest softcam to clear bulsat?


thanks

mdt
14th December, 2010, 12:53 AM
the second file posted isnt opening! can someone plesae link me to the latest softcam to clear bulsat?


thanks


here try this, regards mdt

sosami
15th December, 2010, 07:18 AM
hi i am new and i dont know how to use softcam pls let me know how to upload softcam file .

telveskid
15th December, 2010, 01:24 PM
Noobs guide to patching your Technomate
Guide for the newbies.

Heres how to load the patches.


Download the relevant patch and extract.
Download the relevant loader and extract.
Connect your receiver to the pc via rs232c cable.
Choose the correct com port.
Leave the receiver on standby.
Open the loader and select the software tab.
Press browse and find the extracted patch.
Press ok then start then wait.

This will take a few minutes. Thats it. The same things need doing for softcams but make sure you use the keys tab. Everything else is the same.

USB, By Benny/9

FIRST ALWAYS MAKE SURE YOU USE THE CORRECT PATCH FOR YOUR MODEL
there are various models and only the correct patch will work or even load on your model
************************

Download the correct patch for your receiver.
Open the zipped folder and take the patch out ready to transfer the patch onto your usb memory stick.
Insert your usb memory stick in the usb port under the front flap.
Turn the receiver on ready to load the patch then press the usb button on your remote.
on the next screen go to data transfer and click>OK.

now you will see a panel with the patch on it, it will highlight, [for patching].
press ok on the highlighted patch then it will load and when it gets to 100% and has loaded, and the receiver has re-booted [turned off and on again] and the channel opens, remove your usb memory stick. you have now loaded the patch and your channels will now open.
***************************
you also load softcams/channel lists/official software etc:in exactly the same way by selecting
the item you want to load.
****************************


Note: if scrambled channel appears on channels which should open; wait a few minutes. This will enable the auto update to kick in.

telveskid
15th December, 2010, 01:31 PM
Noobs guide to patching your Technomate
Guide for the newbies.

Heres how to load the patches.


Download the relevant patch and extract.
Download the relevant loader and extract.
Connect your receiver to the pc via rs232c cable.
Choose the correct com port.
Leave the receiver on standby.
Open the loader and select the software tab.
Press browse and find the extracted patch.
Press ok then start then wait.

This will take a few minutes. Thats it. The same things need doing for softcams but make sure you use the keys tab. Everything else is the same.

USB, By Benny/9

FIRST ALWAYS MAKE SURE YOU USE THE CORRECT PATCH FOR YOUR MODEL
there are various models and only the correct patch will work or even load on your model
************************

Download the correct patch for your receiver.
Open the zipped folder and take the patch out ready to transfer the patch onto your usb memory stick.
Insert your usb memory stick in the usb port under the front flap.
Turn the receiver on ready to load the patch then press the usb button on your remote.
on the next screen go to data transfer and click>OK.

now you will see a panel with the patch on it, it will highlight, [for patching].
press ok on the highlighted patch then it will load and when it gets to 100% and has loaded, and the receiver has re-booted [turned off and on again] and the channel opens, remove your usb memory stick. you have now loaded the patch and your channels will now open.
***************************
you also load softcams/channel lists/official software etc:in exactly the same way by selecting
the item you want to load.
****************************


Note: if scrambled channel appears on channels which should open; wait a few minutes. This will enable the auto update to kick in.