PDA

View Full Version : Volvo change language



adam12112
7th December, 2010, 10:52 PM
Hi,
I'd like change language in S60 '04(V70,S80,XC70) and i do not know where language is save(which chip). Could you help me?

Kind Regards
adam

Holtek
8th December, 2010, 12:14 AM
Language is stored in 68HC912DG128

sogaro
8th December, 2010, 05:03 AM
Cant it be done by diagnostic tool?

Holtek
8th December, 2010, 09:15 AM
You can do it with a DiCE but you need special software. So far I know VIDA2010 is not enough :(

jarecki55
16th March, 2011, 09:50 PM
Is not a possible swap to part of flash in dash MCU, and this way change language?

bodzio012
16th March, 2011, 09:59 PM
You need good programmer which read and write flash in hc912

jarfm
18th March, 2011, 11:55 AM
Is not a possible swap to part of flash in dash MCU, and this way change language?

Yes, it is possible. I have done it with S40/V50 dash, and think S60 dash is quite similar.

bgcomp80
19th March, 2011, 04:15 PM
It`s very simple, you need to clone hc912 and change the mileage to match with your original cluster .

For instance you have a cluster in german and you want to change in english, you write HC912 with a dump in english and you change the mileage according with the original cluster .

The important thing is that you have the corect dump, you need to match ECU DIAG P/N, there are several diferent ECU DIAG P/N .

For example an S60 cluster :
ECU DIAG P/N 8673401B
ECU HARD P/N 8633807A
ECU SOFTWARE-
8666755A
30786614AA
30656262A Lang. English
8673928A

ECU DIAG P/N 8673401B
ECU HARD P/N 8633807A
ECU SOFTWARE-
8666755A
30786614AA
30656274A Lang. Hungarian
8673928A

pnj
24th May, 2011, 08:07 PM
Hello have one of those dash?s too anyone know if possible to power up on the bench some how ?