need immo off audi A4 ME7.5

[bali motor]

hello.
please help. i need immo off for audi A4 year 2000, 2.0L
ecu number: 8E0 909 557 bosch number: 0261 207 285

regard

[the_knok]

hello.
please help. i need immo off for audi A4 year 2000, 2.0L
ecu number: 8E0 909 557 bosch number: 0261 207 285

regard

Humm
Hi bali motor (http://www.digital-kaos.co.uk/forums/members/63793-bali-motor/)

There is something wrong with your file.
Can you please read it again?
I can have a solution for it

Thank you

[bali motor]

thanks. will read again

[bali motor]

this new read

[the_knok]

Strange friend
It continues to be wrong :S

What programer are you using? try to read it as 25040 insted


Regards...

[mastaflex]

are you reading it internal or external (that 's to say out of the PCB)?

i have problem also with the dump

[bali motor]

i use wellon programmer for to do it.
what problem my dump?

[the_knok]

The dump is not correct
Essencial size, but problaly data too.

Are you reeding it outboard, like mastaflex (http://www.digital-kaos.co.uk/forums/members/31714-mastaflex/) told?

[bali motor]

i read chip with take out the chip.
use adapter sop

[the_knok]

Strange
You must have problems with the programer then. Your first reading is complelty diferent from the second.
Try to read it again, and also as 25040, and post them, to check it please.

Regards...

[mastaflex]

:hmmmm2: and your programmer read ok? try to compare two or three readings with an hexa editor and tell us if it's ok.

have you used your wellon for other jobs before??

[A11463]

this new read

If it will help. Login should be 02085

[the_knok]

:hmmmm2: and your programmer read ok? try to compare two or three readings with an hexa editor and tell us if it's ok.

have you used your wellon for other jobs before??

I alrady compare here, they are completly diferente, in size, and some diferences in data. The programer must have a problem.


Do you have other programer to try to read it, like carprog or upa, etc?

[bali motor]

:hmmmm2: and your programmer read ok? try to compare two or three readings with an hexa editor and tell us if it's ok.

have you used your wellon for other jobs before??


I alrady compare here, they are completly diferente, in size, and some diferences in data. The programer must have a problem.


Do you have other programer to try to read it, like carprog or upa, etc?

yes, first file it's original file from ecu. and second file it's file new read. but i have use immotool for repair it before.

[the_knok]

Ok
Immotool justify the data change (dont know if that file will work)
But there is a problem with the size of it too.
Can you read it with a diferent programer?

Regards...

[bali motor]

no that same programer, just for second file i save to 2FF

[16eddi67]

Try immo off.

[bali motor]

your file same with my second file.

thx

[16eddi67]

your file same with my second file.

thx


No not the same

[StevenW]

does this work?

[the_knok]

bali motor (http://www.digital-kaos.co.uk/forums/members/63793-bali-motor/)
I Think you should try with another programmer.

REgards...