edc15c2 281 001 978 immo offfor 306 hdi

[dashmader]

I am new here and trying to learn something.
I have bought a 406 hdi ecu to try runing it on my 306 hdi, so i can control the vnt actuator by the ecu on my 1852v turbo.
i have already learn that the immo on the 406 hdi ecu is in the 5p08c3.
what would i will need to do to kill the immo???

My best regards Xavier

[bricolo]

Hi
it is one plug ecu, post 5p08 dump

[dashmader]

Hi
it is one plug ecu, post 5p08 dump

yes it is one plug ecu

i am waiting for a seeprog to read the dump on 5p08

so its possible to make this ecu run on my 306, right?

many thanks

[bricolo]

yes it is possible, i have too a seeprog, it's easy
to use it and works fine
regards

[dashmader]

yes it is possible, i have too a seeprog, it's easy
to use it and works fine
regards


thank you bricolo, i think it will arrive in 2 or 3 days i hope
i am trying to control th vnt by the ecu for some time and this is my last hope to do it

[dashmader]

hi there again people, i was informed by the store here in Portugal that seeprog is no longer on sale.
what would programmer should i buy???
Regards

[dashmader]

finally arrived a UPS USB and heres the 95p08 dump, please make me a immo off

[dashmader]

if some one have a original 95p08 dump for a 306hdi edc15c2, i would be very greatfull
HW 0281010249
SW 1037359145

happy holidays

[dashmader]

anyone????

[bricolo]

hello
try this

[dashmader]

i will try it and report back here

[dashmader]

i there, i got a problemp, every time i read the 95p08 with upa i get a diferent file, i am confused. i review the conection to the chip and it seems to be allright, any tips??

[dashmader]

hello
try this


the car doesnt start
the file that i have uploaded is wrong because i didnt have the upa driver installed, now i dont have a original dump. its getting complicated.
know what should i do?????

[rabie_m]

your ecu is 1 plug desolder eprom end star your car %

[dashmader]

your ecu is 1 plug desolder eprom end star your car %

the worl for a few time but after it stoped.
it says dtc: telecodage error, 95p08 not found

[dashmader]

anyone to help a desperate man here?????

[bricolo]

Hello
here you'l found 2 files, try, i think one must work
on your car.
cordially

[dashmader]

Hello
here you'l found 2 files, try, i think one must work
on your car.
cordially

my friend my luck is down the toilet. i broke one pin on the ecu, nwm i am doomed.
strange thing is when i upload the original file of this ecu 0281001978 the car stars fine, but i need to use a file from a 406 hdi110 file 0281010248 that was the vnt control activated.
there is some way of taking the immo from the file i need to use or its impossible??

[dashmader]

my friend my luck is down the toilet. i broke one pin on the ecu, nwm i am doomed.
strange thing is when i upload the original file of this ecu 0281001978 the car stars fine, but i need to use a file from a 406 hdi110 file 0281010248 that was the vnt control activated.
there is some way of taking the immo from the file i need to use or its impossible??


can anyone take off the immo of this file so i can test it the file is 0281010248 from a 406hdi 110, both file are from a one plug ecu