vw touareg V10 11/2003 with tacho universal?

[foxbox]

Hello.
How i do vw touareg 11/2003 with tacho universal?

Can it make by obd? Or chip?

If that is chip? How hard is take off instrument cluster? And where chip is. Did i have to take off needles?

Sorry my bad english! :rofl:

[blackpirate]

Car type: VW Tuareg - 24c16 - 2003 year
The mileage is stored in the next lines:
00D0: ED F0 DB E1 B7 C3 6F 87 DF 0E BF 1D 7F 3B FF 76
00E0: F0 ED E1 DB C3 B7 87 6F 0E DF 1D BF 3B 7F 76 FF
all shown bytes is a mileage

[PremierD]

Car type: VW Tuareg - 24c16 - 2003 year
The mileage is stored in the next lines:
00D0: ED F0 DB E1 B7 C3 6F 87 DF 0E BF 1D 7F 3B FF 76
00E0: F0 ED E1 DB C3 B7 87 6F 0E DF 1D BF 3B 7F 76 FF
all shown bytes is a mileage

And your example has 147,936 kms ...:)

[blackpirate]

Blame tachosoft! :P
haha

[PremierD]

lol.............

[Digamax]

Hello.
How i do vw touareg 11/2003 with tacho universal?

Can it make by obd? Or chip?

If that is chip? How hard is take off instrument cluster? And where chip is. Did i have to take off needles?

Sorry my bad english! :rofl:
Hi, yes you can do this Touareg by OBD with Tacho Universal but you must use old Audi/VW Sharan 2000 cable.

best regards
Vladimir

[foxbox]

Hi, yes you can do this Touareg by OBD with Tacho Universal but you must use old Audi/VW Sharan 2000 cable.

best regards
Vladimir


Hi. Did you mean this cable? Cable SHARAN 2000 OBD2 for Tacho Universal (http://www.resettools.com/tacho_universal_2008/spare_parts/tacho_universal_sharan_2000_obd2_cable)

I try that cable and not working! :(

How i remove instrument cluster? And where chip is in that cluster? Did i have to remove needles?

Thanks!

[foxbox]

:elefant: Please help me! :coffin:

Any one!?

Thanks much beforhand...

[Artjom]

you have to remove needeles.. then you see on pcb the chip... to remove the needles you need to twist the needles into other direction and pull ..

then i recomend to desolder the chip

if you need help contact me

[justy22]

Hi. Did you mean this cable? Cable SHARAN 2000 OBD2 for Tacho Universal (http://www.resettools.com/tacho_universal_2008/spare_parts/tacho_universal_sharan_2000_obd2_cable)

I try that cable and not working! :(

How i remove instrument cluster? And where chip is in that cluster? Did i have to remove needles?

Thanks!


Remember to open up cable and bridge pin 3 and 7 or it wont work, i got this tip off here recently

Look here http://www.digital-kaos.co.uk/forums/f174/2003-cayenne-correction-179514/

[exe123]

Remember to open up cable and bridge pin 3 and 7 or it wont work, i got this tip off here recently

Look here http://www.digital-kaos.co.uk/forums/f174/2003-cayenne-correction-179514/

this is valid for cayenne only. porsche has motor and gearbox on 7 and rest of electronics on pin 3.

[justy22]

this is valid for cayenne only. porsche has motor and gearbox on 7 and rest of electronics on pin 3.


Thanks for that, Where do you get this kind of information, i find it amazing these small critical details