View Full Version : Citroen C3 from 2007 crash, need help
carsolution
14th December, 2010, 10:30 PM
Hi guys.
Have a C3 airbag ECU with data crash.
The car is from 2007 and the TEMIC reference is:
TEMIC - 9663357480
42778
Thanks to all guys.
Best Regards,
Nuno
MSolen
14th December, 2010, 11:19 PM
Try and post result
BR
carsolution
15th December, 2010, 03:40 PM
Thanks.
Tomorrow I will post the result.
Did you correct it using tacho?
Regards,
Nuno
carsolution
20th December, 2010, 06:15 PM
Hi guys.
Like promissed here it goes the reply.
The dump worked well.
Regards to all.
Nuno
AMON
7th January, 2011, 06:32 PM
Hi, what ic do you have to read, in order to clear dump in this unit ?
best regards
morfej
8th January, 2011, 09:59 PM
Read eeprom 95160, marked with red on the picture.
AMON
10th January, 2011, 11:42 AM
Hi, my unit don?t have 95160. it?s from a 2008 c3 but same reference.
morfej
10th January, 2011, 01:18 PM
That's the opposite side of the PCB, you have to remove PCB from the box to get to it.
AMON
10th January, 2011, 02:06 PM
The PCB, can?t be removed from the box, do i have to cut it, or is there any other solution.
thanks
morfej
10th January, 2011, 02:12 PM
Look that thread how the pcb can be deattached nicely.
http://www.digital-kaos.co.uk/forums/f170/temic-9648665580-a-159019/
AMON
10th January, 2011, 03:03 PM
can someone clear this file, please
morfej
10th January, 2011, 03:18 PM
I thought that will be the next post from you :)
Here is 100% tested solution.
AMON
10th January, 2011, 03:19 PM
thanks, again :)
What software, did you use to clear it ?
Best regards
morfej
10th January, 2011, 03:22 PM
None.... never trust software :) ! ... relay on your experiences.
energjia
20th January, 2011, 05:55 PM
I thought that will be the next post from you :)
Here is 100% tested solution.
can i know the password to open the file C3-2008_Temic_9663357480_clear.rar (http://www.digital-kaos.co.uk/forums/attachments/f170/45869d1294669082-citroen-c3-2007-crash-need-help-c3-2008_temic_9663357480_clear.rar) ?
thanks
viorelloj
30th May, 2011, 10:13 PM
hello
pls. help me file for airbag c3
pls passw.
churry
19th October, 2011, 11:21 AM
can someone clear this file, please
hello friends.
as you get in that unit for reading the eeprom 95160, cutting the box as you have done or have followed the procedure, but gives me no clues
Can you tell how you could access the memory 95160
a greeting
thanks
AMON
19th October, 2011, 11:52 AM
just lift the board genttly with a screw driver, it?s not soldered
vince94
27th December, 2011, 08:02 PM
pass merci
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.