GOLF 4 1999 MARELLI 61600 497 01 0 36 906 014 AN IAW4CV.VO

[the_knok]

Hi
Does anyone knows if it is possible to do immo off in this unit

MARELLI 61600 497 01 0 36 906 014 AN IAW4CV.VO

Maker - VW
Model - Golf IV
Year - 1999
Engine - 1.4
EEP - 95040

Thank you all in advance


Regards...

[Nocni]

Try this dump... it's clear for 1.4 marelli...
But the easiest way to do is coding new key...

[lupu_sandu]

Is not possible immo off in MM ECU my friend.

[the_knok]

Ok friends
thanks
ii will read the pin and prociding to coding.
I will try the dump as well.
Nothing to lose:)

Thanks

Regards...

[the_knok]

Update friends
When i try to recode key.
I do it like this:
17 - instuments
07 - login (and here i put the pin)
then 10 - 00 test - save
then 10 - 21 test, and it gives error.

After this, the car starts well about 15 to 20 minutes, then its blocked again, i repeat the procidure and it starts again untill the time pass again. And its blocked again.
Im doing something wrong? I already made this and never add problems but here.
I suspect i have the dashboard with malfunction. The imo light doenst turn ever, not even in output tests.

Already try with a new transponder in the key, and in this case, in the 10 (adaptations) - 00 - it says - not saved. With the old one it says saved. But the felling that i get its that it is saving nothing, one way or another.

Does anyone have some ideia? Any will be welcome.

Thank you all

[Nocni]

You said:
When i try to recode key.
I do it like this:
17 - instuments
07 - login (and here i put the pin)
then 10 - 00 test - save
then 10 - 21 test, and it gives error.

You making mistake...
17 - instruments
11 - login (if your pin 1234 put 01234)
10 - 21 put number of key and "save"
then 10 - 00 test - save

[the_knok]

Thank you for reply
That its what has to be done always. put a 0 before.
In 21 he gives error, always.
This is solved.
Is the Dash damaged

Regards...

[the_knok]

My mistake, i didnt do 07 but 11

I already had made that bebore, and it always give error.
The problem is the dash.
Does anyone have a good dump for this dash. The dash is: motormeter 1J0 920 801

I put other, used. And the car starts perfect and accept the procidure excelent. But there is diferences in the gateway, the problem is that the airbag light stays alwyas on, and it gives the error of gateway, low voltage. But just in this dash. This dash that im using now is - motormeter - 1J0 919 860
In this one i have gateway incompatible

Thank you

REgards...

[Nocni]

This is dump with soft version 13... and number is same 1J0 920 801... pin is 07016

[the_knok]

thank you all
its SOLVED

Regards