PDA

View Full Version : clio sport tuning help



magnacin
15th December, 2010, 07:23 PM
Hi,
I have this tuned file for a clio sport 2004 petrol sirius 34 ECU.

As I tested it it still cuts RPM around 7000. Can anyone help by removing RPM limiter at all or set it real high.

Thanks for your help.

:banghead::banghead:

gezame
15th December, 2010, 10:44 PM
Hi
Rev limiter is in
7471A-7471C-7471E
16 bit, LO_HI
you modify to your liking.....
Regards.

magnacin
15th December, 2010, 11:03 PM
Thanks for your reply. I appreciate your help.

Kuba_KMS
16th December, 2010, 12:32 AM
if you need any more help PM or skype me.

Best regards

Kuba

magnacin
16th December, 2010, 01:10 AM
Thanks Mr. Kuba

guille_masco
16th December, 2010, 05:07 AM
How do you read/write this car??

Kuba_KMS
16th December, 2010, 11:08 AM
you can r/w this car with galletto, or desoldering/programing memory chip (as i remember well) it's 29f400bb.

best regards

kuba

magnacin
16th December, 2010, 04:39 PM
I desolder the chip. I tried using galleto clon but somehow information from galleto differs from unsoldered chip so I remove chip. and it is correct is a 29f400

MarkPRP
16th December, 2010, 05:40 PM
what programmer do you use to read 29f400?

magnacin
16th December, 2010, 05:46 PM
I use GQ-4X with adapter from mcumall.com

Kuba_KMS
16th December, 2010, 09:02 PM
I desolder the chip. I tried using galleto clon but somehow information from galleto differs from unsoldered chip so I remove chip. and it is correct is a 29f400

Galletto read only part of all memory. It reads part which contains maps.
Both of these methods of tuning it are good, no matter do you read whole chip or just map area.


Best regards

Koko

666grinder
10th March, 2011, 11:07 PM
I have the Clio sport 172 -00 sirius 32n.
Is the fuel/ign map at same adress?
Does anyone have a a2l- file or a damos?

I have installed a turbo and need to edit my maps..

///Daniel

Kuba_KMS
12th March, 2011, 02:48 AM
Do not waste your time tunign stock ecu with turbo kit... Hopeless work...
Better option is to use plug'n'play replacement for sotk ecu like KTR Gen90 ECU. Works like a charm!


Best regards

Kuba

666grinder
23rd March, 2011, 08:59 PM
Yes i know it is harder then with a aftermarket system.
I actually have missed that ecu. Damn. what an shame i dont have 1000? to spare..

But do you have any info on the clio 172 -00 CB0M sirius32n?

I figure i need fuelmaps, ing.maps lambda and all the rev limits..

I realy, realy would be so wery wery happy.

///Daniel

Kuba_KMS
23rd March, 2011, 09:46 PM
PM, mail or skype me.

I think I will be able to help you.

Best regards

Kuba