PDA

View Full Version : write dump with BDM fails...



michi84
15th December, 2010, 10:37 PM
I have bought a BDM Clone (CMD1255 written on it). It came without soft so I downloaded cracked CMD 1255 and dimsport soft.
CMD 1255 doesnt work at all. Dimsport can read perfect.
Writing with DImsport is not writing corectly. it does for some time an then stops with error code:
"Block write error (E08)"

MPC500 Family Version: 0x00020020
MPC563/4 Part Number: 0x36200000
EPEE Status: 1
Flash Identified: M58BW016DB
Family Identified: EDC16+ VAG (MPC564)
. . . . . . . . . .

Info ECU
SW: 1037389201
UPG SW: 1141
VIN: WAUZZZ4F48N068328
Spare Part: 03G906016ME
System: EDC16U31
Engine: R4 2,0L EDC

POWER ON
Ready...

C:\Dokumente und Einstellungen\passufff\Desktop\DimSport\DimSport\D IM\huhu.dim
. . . . . . . . . .

MPC500 Family Version: 0x00020020
MPC563/4 Part Number: 0x36200000
EPEE Status: 1
Flash Identified: M58BW016DB

Programming M58BW016DB...

Testing Block at: 0x00800000
Testing Block at: 0x00802000
Testing Block at: 0x00804000
Testing Block at: 0x00806000
Testing Block at: 0x00808000
Testing Block at: 0x0080A000
Testing Block at: 0x0080C000
Testing Block at: 0x0080E000
Testing Block at: 0x00810000
Testing Block at: 0x00820000
Testing Block at: 0x00830000
Testing Block at: 0x00840000
Erasing Block at: 0x00840000
Writing Block at: 0x00840000
Testing Block at: 0x00840000
Block write error (E08)

Total time: 00:47 sec.
Failed
Failed

Wait Please
POWER OFF

bazare
17th December, 2010, 11:22 PM
try to coonect power to ecu pins not to bdm

michi84
26th December, 2010, 10:06 PM
try to coonect power to ecu pins not to bdm
did that already. maybe bad dump in motorola mcu in bdm. just orderen a programmer. will test it in new year!

renut
2nd January, 2011, 04:25 PM
for information:
I have also BDM Clone (CMD1255 with Dimsp. SW on WinXP)
I have testet on Ford with EDC16C34 (MPC562)
...read & write without any problems!

mods4cars
3rd January, 2011, 04:34 PM
I have bought a BDM Clone (CMD1255 written on it). It came without soft so I downloaded cracked CMD 1255 and dimsport soft.
CMD 1255 doesnt work at all. Dimsport can read perfect.
Writing with DImsport is not writing corectly. it does for some time an then stops with error code:
"Block write error (E08)"

MPC500 Family Version: 0x00020020
MPC563/4 Part Number: 0x36200000
EPEE Status: 1
Flash Identified: M58BW016DB
Family Identified: EDC16+ VAG (MPC564)
. . . . . . . . . .

Info ECU
SW: 1037389201
UPG SW: 1141
VIN: WAUZZZ4F48N068328
Spare Part: 03G906016ME
System: EDC16U31
Engine: R4 2,0L EDC

POWER ON
Ready...

C:\Dokumente und Einstellungen\passufff\Desktop\DimSport\DimSport\D IM\huhu.dim
. . . . . . . . . .

MPC500 Family Version: 0x00020020
MPC563/4 Part Number: 0x36200000
EPEE Status: 1
Flash Identified: M58BW016DB

Programming M58BW016DB...

Testing Block at: 0x00800000
Testing Block at: 0x00802000
Testing Block at: 0x00804000
Testing Block at: 0x00806000
Testing Block at: 0x00808000
Testing Block at: 0x0080A000
Testing Block at: 0x0080C000
Testing Block at: 0x0080E000
Testing Block at: 0x00810000
Testing Block at: 0x00820000
Testing Block at: 0x00830000
Testing Block at: 0x00840000
Erasing Block at: 0x00840000
Writing Block at: 0x00840000
Testing Block at: 0x00840000
Block write error (E08)

Total time: 00:47 sec.
Failed
Failed

Wait Please
POWER OFF

Edc16u31 dont work well with clone tools . Try put the ecu in the freezer for half an hour , wrap it up in a bag first then try to do a write

carmageddon
3rd January, 2011, 05:48 PM
Edc16u31 dont work well with clone tools . Try put the ecu in the freezer for half an hour , wrap it up in a bag first then try to do a write

i had a similar problem with original bdm cmd but i solved only with a clone....the problem was an old patch to disable chk control at the file biginning.
I know that this problem is different but this wanna just to say that the original instruments are not always infallible