BMW e 39 probs urgent

[tomuch]

Hello i have an bmw e39 high ? ike sw 13 hw 14 year 2000
Current km is 352940 in 0040: is shown :9D23 1259 1BFC
I WANT 228562 MY DIgister writes in 0040 : A127 16AC EEC0
TACHOSOFT SAYS THAT I WRITE .: 228562km =0040: 27A1 AC16 C0EE

What is right ????

Thanks for answer
Michael

[PremierD]

I would use the first one mate ...

[tomuch]

ok i try both and every time the same show me 274345 put the origin back same shit 274345 and miles shown . put the 93 cs66 out and same count 274345

whats going on

please help

michael

[vageric]

E39 from 2000 have M35080 inside if i`m correct!!!!
did one yesterday!! s.w. 14 - h.w. 13

[tomuch]

i opend it and found only an 93 s 66

[maumaumau]

E39 from 2000 have M35080 inside if i`m correct!!!!
did one yesterday!! s.w. 14 - h.w. 13


not all...some of them have 93s66...

@ tomuch :use bmw scanner to do this type of dash by obd

[tomuch]

dont have obd scannder

[tomuch]

i tra really everything put back the original damp direct in 93s66 odo shows 274... miles try to change it odo shoes again 274... miles take out the 93s66 and power it up odo shows again 274... miles please can anyboda help me is the kms in other space stored ???

[martiboy]

i tra really everything put back the original damp direct in 93s66 odo shows 274... miles try to change it odo shoes again 274... miles take out the 93s66 and power it up odo shows again 274... miles please can anyboda help me is the kms in other space stored ???

Post your dump here

[tomuch]

i have digimaster 2 dump can somebody convert him ???

[maumaumau]

dont have obd scannder

i'm talking about bmw scanner,not "obd scannder"...buy a cheap chinese copy...if you can modify mileage from dump,please tell me how...and post both dump here...

[tomuch]

there must be an other option as buy new tool

[igendek]

Put your dump here. I`m going to help You.

[tomuch]

Put your dump here. I`m going to help You.

ok here it is

[tomuch]

ok i see what i maybe i forget to short the quarz is that the reason ??? did i destroy the odo with that

[tomuch]

come on guys dont forget me

[tomuch]

still need help

[toniz]

You should try driving the car for 50km or more and then try again, or use a frequency generator and pulse it. I had a problem like that very long time ago, and this solved it.
Also the dump you posted is read with Tacho, try reading with a programmer in bin format, and we'll try to help.

Good luck

[alimmo]

if you have a Diga /tacho you can do this via obd selecting sw16, or else iwould suggest that you bridge the quartz, and the then change the new value in km and all will be fine mate im sure.

[tomuch]

i tried it with driwing nothing help try to prog it with obd onlr read ???????? . so i ordered a new (used) cluster. can somebody tell me where the vin is stored in the eprom i will this time read it direct and change km and have to change the vin to .

wbrgds
michael

[tomuch]

maybe somebody can check my dump i make an screenshot in word

[tomuch]

nobody ???????

[labusas]

1.You should read an eeprom again
2 put it all together in the car
3 drive around for 20 km or so
4 read an eeprom again now
5 compare two files and find the area that changed - that's where you change milleage
6 battery has to be disconnected, press horn for a while to empty capacitors
7 put it in the car, milleage should change

[tomuch]

thanks i will try it

[hcip]

if I am correct digimaster II has an adapter (9pin DB9) for E39
connect it via cluster plug and select diagnosis

[tomuch]

yes it have but only read ???????????

michael

[hcip]

yes it have but only read ???????????

michael

just enter the required value, it will works

[markony79]

Its same like m35080

[tomuch]

ok try all this things but nothing work . i buy a new odo can please someone tell me where the vin is stored m35080 sw14 hw 15