help vag k+can commander v3.6

[dellby]

Good afternoon.
Help please.
3.6 it has bought chines vag k+can commander 3.6 is not started and writes "open port failed", "Cannont find device".
I have read it mprog 42964
Took from the friend a cable with the same version and has checked up - it works, has read it mprog. 42966
Has flash the cable of its value - the program all the same is not started.
Help plz.

[sspm]

Uses FT_PROG .exe to read the xml file to your friend's cable and save it on your pc, then follow the steps in the HELP file, but using the file the file saved by you.
Let me know
sspm

[dellby]

The seller sent to me to video on setting where the cable is defined in windows as USB Serial Converter.
I created in mprog the new project and wrote there title USB Serial Converter.
Miracle after that the program earned.

Tried to install on other notebook and there as before errors open port failed "," Canont Find Device ".

At me it was necessary to delete the driver ftdi on the first notebook and installed them again. Now and on it does not work as right at the beginning.

I ask if someone has such cable throw off an insertion ft232rl (in any program)

At Chineses of 2 versions 3.6 - at me 3.6.2 judging by video.

Please inform sequence of setting and connection in the computer and car (if there there are singularities)

[sato-bmw]

Hello friend, I have the same problem you with vag q k + can commander 3.6, it does not solve this.
if you have any recommendations or ept that works.
I'll be very grateful .-
Thank you very much

[mecale]

http://www.ftdichip.com/Support/Utilities/FT_Prog_v1.12.zip

THANKS....

[sato-bmw]

thanks friend, tomorrow I will try and will report the results

[sspm]

Sorry but I do not speak English is betrayed by google.
Before the holidays I have experienced a death in the family, then there were the holidays but now I'm here.
I read your post but not to give precise solutions.
For DELLBY even if there are any software to uninstall the drivers are not removed completely, all that remains is to format.
SAINT-BMW for the file you just restore it by 3.6 and follow the steps you'll see that it works, I succeeded with what is described in the procedure which I have attached the file with the 3.6 of which I have attached the file because I have the formattao portalile where it was allocated.
Greetings to all

Scusate ma non parlo inglese ? traduto con google.
Prima delle feste ho subito un lutto in famiglia, poi ci sono state le feste ma ora sono qui.
Ho letto i Vostri post ma non sono precisi per darvi soluzioni mirate.
Per DELLBY anche se ci sono dei software che disistallano i driver non vengono rimossi del tutto, non rimane che formattare.
Per SANTO-BMW devi solo recuperale il file del 3.6 e seguire la procedura vedrai che funziona, io ci sono riuscito sia con quello descritto nella procedura di cui ho allegato il file che con il 3.6 di cui non ho allegato il file perch? ho formattao il portalile dove era allocato.
Un saluto a tutti.

[sato-bmw]

Hello friends, I tried to second xml file below, and did not work, try it on 3 different pcs, I will try on a newly formatted to see if I have luck .-
(the first attachment I can not open even if I change the extension to xml).

but it occurs to me that I can have a problem in the memory of lpc2119 micro .-

Greetings

[sato-bmw]

Hello friends, the solution was simpler than expected, placing works only as com port 1, when leaving car ports will always installed backwards, ej, port15 port 16, etc etc. q must be removed as shown on port 1 and setup from home port advanced control panel .-

Sorry my English

[andreyyy]

i need a ept for vag commander to write his eprom pls help

[Floyder]

Does the version 3.6 work with windows 10?