PDA

View Full Version : Adapting new multifunction display on P407 with PP2000



mikeli
16th December, 2010, 01:05 PM
Anybody have procedure for adapting new multifunction display on Peugeot 407 y2005 with PeugeotPlanet?


Regards
Mikeli

mikeli
17th December, 2010, 08:38 AM
Now question should look like:

Now display is working ok, but I can't activate audio option and climatisation option, always get:

"configuration failed"

And off-course there is no info on display from audio and climatization...


Regards
Mikeli

roman_auto
22nd December, 2010, 11:08 PM
Now question should look like:

Now display is working ok, but I can't activate audio option and climatisation option, always get:

"configuration failed"

And off-course there is no info on display from audio and climatization...


Regards
Mikeli

go manual configuration and chage it to multiplaxe communiction and mono air condition and sound system

mess300
29th December, 2010, 03:07 AM
bonjour mikeli quel interface tu utilise pour pp2000

EssexTech
8th January, 2011, 10:52 PM
Did you get this sorted

javilette
9th January, 2011, 08:10 PM
if you have the same hw sw in the new display you only have copy all the configuration of the original to the new diplay. put the old dipaly read the configuracion wict pps2000 and them put the new display and put the configuration (vin..........) if you have a diferent display you need go to the dealer and do it tautoconfiguration by internet.

EssexTech
10th January, 2011, 09:39 PM
if you have the same hw sw in the new display you only have copy all the configuration of the original to the new diplay. put the old dipaly read the configuracion wict pps2000 and them put the new display and put the configuration (vin..........) if you have a diferent display you need go to the dealer and do it tautoconfiguration by internet.

You must clear any fault codes first and with the modified MFDs if you need miles and it comes up KM's you need to go back to Customer options and change the Vehicle Dynamic(Not Sure if it is dynamic) information configuration this line is usually second from bottom of the page.