PDA

View Full Version : mercedes clk 320cdi edc16+ immo


eleeinidis
16th December, 2010, 06:24 PM
Dear friends.

I have a mercedes clk320 cdi . The ecu type is edc16+ . I read the processor (mpc564mzp56b) . And I am lloking where is the immo and how can I remove it. can anyone help me ? thank you in advance.:rangers:

Download:
Pzolee
19th December, 2010, 05:39 PM
No read mpc.
Read eeprom and upload dump.
DJAMY
19th December, 2010, 06:45 PM
no immo off , for EC16 , forgot it
just renew an programm with star
this is the only way
kool_mi
19th December, 2010, 07:28 PM
no immo off for this ecu
the immo is in eeprom 95160
you can used bdm for read
immokill
19th December, 2010, 07:39 PM
no immo off , for EC16 , forgot it
just renew an programm with star
this is the only way

100 % true


You can use MBEcuClear v167 to make new dump and else is done with Star Diiag.



Regards
eleeinidis
21st December, 2010, 02:39 PM
no immo off for this ecu
the immo is in eeprom 95160
you can used bdm for read

it doesnt have 95160 .

The main problem is that when I am reading the faults with mbstar the CDI 4 , has a message " Earlier control unit programming was not performed completely and successfully " and when I am trying to program it I get a message " no new update " . I am very comfused . Any idea ?
DJAMY
21st December, 2010, 05:06 PM
CDI4 ???????????

NEVER TRY TO OPEN
no eeprom inside ,only can read BDM over cover
take care
vwpassat
21st December, 2010, 10:17 PM
Did you read MPC564 by what? BDM100?
I have BDM100 but I never made it to read MPC564 despite I have tried many time. Does connection are different as CDI3, 10pins?
I would like to figure out what BDM do I need to read CDI4 MPC564? This is my question dear mates.
Thank you.

Dear friends.

I have a mercedes clk320 cdi . The ecu type is edc16+ . I read the processor (mpc564mzp56b) . And I am lloking where is the immo and how can I remove it. can anyone help me ? thank you in advance.:rangers:

Download:
DJAMY
24th December, 2010, 10:40 AM
by bdm , cmd soft is ok
bdm pins connection are in back side of ecu board
open= kill Ecu:pcguru:
morris981
8th April, 2011, 10:48 AM
hi guys i have a problem with mercedes e280 3200cdi six in line engine.i need to decode or virgin this ecu you can help me?ecu bosch 717.this is the eeprom dump
sogaro
8th April, 2011, 11:39 AM
hi guys i have a problem with mercedes e280 3200cdi six in line engine.i need to decode or virgin this ecu you can help me?ecu bosch 717.this is the eeprom dump
here you go................. Download 717_done from Sendspace.com - send big files the easy way (http://www.sendspace.com/file/7c9vy3)