VOLVO AFTERMARKET RADIO AUM MISSING CAUSING SRS SERVICE

[Fordracer4life]

04 VOLVO S40 customer installed aftermarket radio and now aum comm is missing causing steering wheel controls to have cem turn on service srs system. I looked in vida and dont see a way to turn steering wheel controls off. Any help would be great. Thanks Fordracer

[Meat-Head]

This an UNCONFIRMED RUMOR that clearly states in the radio wiring plug is everythin, you could imagine, reverse lights, heated mud flaps, reverse thruster, side lights, can-bus everything, did you chap use an iso block? - Think your from America - you properbly have no idea what an ISO block is.

See if you can download aftermarket can-bus sterring wheel control adaptor for new radio ga-ga.

HTH

Meat.

[Iroll]

I had a S60 with aftermarket radio and SRS on.
S40 is different I assume it?s S40II
I used VIDA and did a complete erase all nodes. From what I remember it took a few times.

Use the ?Thanks Button?

[Fordracer4life]

This an UNCONFIRMED RUMOR that clearly states in the radio wiring plug is everythin, you could imagine, reverse lights, heated mud flaps, reverse thruster, side lights, can-bus everything, did you chap use an iso block? - Think your from America - you properbly have no idea what an ISO block is.

See if you can download aftermarket can-bus sterring wheel control adaptor for new radio ga-ga.

HTH

Meat.
Thanks I did not know what iso block was as we call it a installation harness . I also did not know some radios will work with factory controls. Dont you know volvos dont work with aftermarket. I have tried clearing all codes with vida a couple times no luck as well look for a place to change cem config to not look for it. Maybe there is a there is file for the central module I believe thats the one sending the message. Heres what works with them.


ManufactureRadio ModelRemoteEclipseThe SWI-ECL does not support the following Models: CD3000, CD4000, CD5000, CD7000, CD8445, CD8455, CD5425, CD5435 -For these models use the SWI-X. JVCThe ASWI-X does not work with the following remotes and possibly more. Look in the connection guide for an "O.E. Wired remote" connection and use the SWI-JACK.RM-RK230, RM-RK240, RM-RK250SonyMEX-5DI, MEX-1HD, CDX-M850MP, CDX-M3DI, CDX-MP70, CDX-MP80, CDX-CA900X, CDX-M7815X, CDX-M730, CDX-M770, CDXM620, CDX-M670, CDX-M800, CDX-M8800, CDX-M8805X, CDX-M8815X CDX-M9905X, CDX-CA850X, CDX-CA860X.RM-X110, RM-X112, RM-X131, RM-X145A, RM-X143A
Known vehicles not supported.
ManufactureModelYearDescriptionBMWAll with a 5v SWC wireAllAll with 5-volt SWC data wire at the steering column or a factory installed cellular phone that is in use!MercedesAll2005-2007 ToyotaSiennaAll-2003Sienna VansVolvoAllAll

[Iroll]

There is not a selection for ICM removal under vida software. Plug the ICM in and see what happens. Hide it under the dash?
Good Luck!

[Meat-Head]

Was going to do more digging on this - but have decided - still HATE Volvos, YUCK.

have a snoop round Halfords | Bikes | Sat Nav | Car Audio | Car Seats | Car Maintenance (http://www.halfords.com) and www.connects2.com and Developing advanced vehicle technologies... | ArmourAuto.com (http://www.armourauto.com)

HTH

Meat.