pin code

[kevfield]

Can anyone help me with pin for opel zafira 2000 WOLOJBF1911164504

Thanks kev

[AdamDavidSzocs]

Get the immobox out mate, read and post TMS370 dump.

[kevfield]

ok, do you know where it is?

thanks kev

[Rito]

It?s easy.
beneath the wheel...

[kevfield]

Can any confirm 3185 is correct pin please?

thanks kev

[Jur]

Yes,3185 is correct pin

[giar67]

a mi me resulta a22f

[kevfield]

Thanks for all your help guys worked car running again, the only thing is first time i programe the key car started no probs 3 4 or even 5 times but then wouldnt start so i tryed to reprogram key in again still wouldnt so i took tms chip back off reprogam to ori file then reprogram key in car started anyone have any ideas on this?

Thanks kev

[the_knok]

Thanks for all your help guys worked car running again, the only thing is first time i programe the key car started no probs 3 4 or even 5 times but then wouldnt start so i tryed to reprogram key in again still wouldnt so i took tms chip back off reprogam to ori file then reprogram key in car started anyone have any ideas on this?

Thanks kev

Humm
Does it starts well now? Or only the firsts times? And then, when you leave to "sleep", it doesnt start again? If that is the case, you may have problems in the imobox. Just loosing the pin constantly.
What do you have in live data?
Post some details here if possible.

REgards...

[kevfield]

yes it just has done the same now not running, thanks for your help.

Thanks kev

[the_knok]

yes it just has done the same now not running, thanks for your help.

Thanks kev
What car is it?
Its common does imobox stress out.
What do you get in live data in the imobox and ECM?
Are you using OPcom?

[melcool]

what is the engine type?!

[kevfield]

engine type is 2.0DTL

Thanks kev

[kevfield]

Sorry for late reply it has deplhi ecu and psg5 pump ecu , i have change immo box and key transponder and still the same thing fault codes from opcom are no signal from transponder is there any way to remove i**o on this car or make tms write protect so that it will only need to write immo once to ECU?

Thanks kev

[kevfield]

Still having this problem with this car what i have found out is that once car dont start i seen to lose com,s with any moduels eg immobox,ecu and pump ecu i can only get com,s back when i remove tms chip and program it back to ori file anyone any ideas???
also even when i get the car running in special function part for psg5 pump ecu can com whit it but can with all others when i get it running i think it needs burning :)

thanks kev