View Full Version : EDC15 recovery without soldering
chucky69
26th December, 2010, 06:32 PM
Hello, somebody hear about solution for repair failed written edc15 ecu without soldering (29f400 / 29f800)???
solution must be, because my friend has it, but dont want tell me what is it.
No more soldering. No boot mode. No opening ecu. Only connect to ecu connector, and write full file.
elosomaloso
26th December, 2010, 07:06 PM
Only with recovery function from profesional tools,
like Aloentech Kess v2...
masterb
26th December, 2010, 08:30 PM
Optican can to it ...
and i think also MPPS do it
re
chucky69
26th December, 2010, 10:25 PM
optican, mpps, kess cannot recover edc15, only edc16 ....
bazare
26th December, 2010, 10:25 PM
Yes mpps should do vag EDC15 recovery with slow speed.
chucky69
26th December, 2010, 10:49 PM
do you tested it? failed write and then recover ecu.
kiripe
27th December, 2010, 12:53 PM
Yes MPPS can recover EDC15 failed write, by forcing a new write on the ECU without even ID'ing it. Look in the generic section.
edc
28th December, 2010, 12:46 AM
edc15 recovery function tested several times with original MPPS ...
works great ...
gzk
30th December, 2010, 01:41 PM
edc15 recovery function tested several times with original MPPS ...
works great ...
exact no rpoblem on my clone tested
sepistar
30th December, 2010, 03:34 PM
i know that im software is included the option recovery,but is there any feedback from Mpps[clone] that work onAudi EDC16, has someone tested?
regards
bazare
30th December, 2010, 08:14 PM
yes works ok on vag edc16
sepistar
31st December, 2010, 08:14 PM
if the write fails, you can rewrite the original software? sorry to insist the questions but I would not want to ruin anything.
I did some and evrithing was ok,better before ask then after crying.
Happy New Year!!
regards
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.