BMW Dcan pcb schematics+ hex for your vag hex can

[cipijoint]

for those who are curious how looks a dcan .
all of them contains atmega 162, sure very similar like a vag hex can.
PCB + schematic + flash atmega 162+ usb ept for mprog attached.
If you study and modify a little your vagcom can have a dcan at home.
unfortunately i dont know the right the fuse bits for atmel.
I programmed with this flash few years ago a Vag hex can, but interface was becoming very hot and led red all time,something was in short to + with this flash, so for sure your hex can needs hardware modifying.
Beeing lazy i preffered to buy ihar dcan that time ..

[ipejasinovic]

OK, but do you know what this is? And are you sure 100% that this works as D-CAN Device?

Hint: USB-CAN Bus (http://www.mictronics.de/projects/usb-can-bus/)

[cipijoint]

yes sure I know, from mictronics is it indeed.

but files are since 2 years ago . now from that website there are not anymore ,changed and i think not to downloads available.

Ive post the same few monts ago in garrage area that now its closed to me.
I posted again in this area for people around here.

I think it works ,but only not sure if 12v signal ignition on/off its forwaded to usb