PDA

View Full Version : DTC Remover



chucky69
27th December, 2010, 10:15 PM
Hello, does anybody have this software???

DTC Remover

Removes ALL DTC - Error codes from a ECU. Removes Limpfunctions and error warninglights.
This File patcher is used to remove any error code from a ecu.
If you have a ecu that gives you problems with an error code you cannot remove this is your tool.

Can remove diffent levels of error codes or just remove them all.

The following ECU are supported:
Bosch
EDC16
EDC17
Med17
Med9.1
Siemens SID
Siemens PPD
Marelli
Delphi
This is just a file patcher , you will need a tool to read and then write the modified file back to the ecu.


DTC Removal - Removes all DTC from ECU [DTC ALL] - €3,000.00 : CT Tools, Chiptuning tools (http://chiptuningtools.eu/index.php?main_page=product_info&cPath=3_11&products_id=35&zenid=f1b127006e5dc808d03d49e4328a1ae1)

octaveRM
27th December, 2010, 10:43 PM
good software but vry very hot price:
?3,000 !!!!!!!!!!!!:cheer:

se93
27th December, 2010, 10:51 PM
That would be a useful program. Be nice to eliminate the post cat O2 sensors from the BMW E46 when installing aftermarket headers and eliminating the cat converters.

Anyone?

Regards,
Mark

rossoelab
30th December, 2010, 07:01 PM
hello friends
can someone post this sw?
there would be grateful
thank you very much

obdmaster
30th December, 2010, 07:05 PM
But surely error codes are there because theres a system malfunction. Seems pointless exercise as bad as takin the bulb out. If you ask me.

adam28
30th December, 2010, 07:07 PM
But surely error codes are there because theres a system malfunction. Seems pointless exercise as bad as takin the bulb out. If you ask me.

Hmmmmm, just like the good old days lol

RSwire
30th December, 2010, 07:11 PM
But surely error codes are there because theres a system malfunction. Seems pointless exercise as bad as takin the bulb out. If you ask me.
To much work removing the bulb, just put black tape over the light. lol

chucky69
31st December, 2010, 07:48 PM
i think it could be so useless sw for egr off, maf off, dpf off and for some stupid errors.

rossoelab
24th January, 2011, 12:44 AM
please post this software?
thank you very much

grinovsky
24th January, 2011, 09:20 AM
i think that this software is blocking access to the RAM where are stored the DTC and for a simple connection to an injector that is repaired in 2 minutes you will change the engine in 2 days to repair the malfonction
i don't like be at your place when the customer ask you :what did you do to my ECU?:secruity:

rossoelab
24th January, 2011, 09:54 AM
i think that this software is blocking access to the RAM where are stored the DTC and for a simple connection to an injector that is repaired in 2 minutes you will change the engine in 2 days to repair the malfonction
i don't like be at your place when the customer ask you :what did you do to my ECU?:secruity:


perhaps it is as you say
it would not be a good job if it blocks the ram ..
but I would like to test before drawing conclusions
thanks for the reply

tirlibibi
24th January, 2011, 01:29 PM
DTC = Error in system, Removing all DTCs is not good !
What are you looking for ? Doing shitty work and masking it ??

Good Work = No DTC !

rossoelab
24th January, 2011, 05:04 PM
DTC = Error in system, Removing all DTCs is not good !
What are you looking for ? Doing shitty work and masking it ??

Good Work = No DTC !

I will not do a bad job and hide ....
I plan to just understand and see where and how this software works

diagnoza_auto2000
11th February, 2011, 08:02 AM
Sometime you have DTC and there its no fault,and that DTC can put your engine in limp mode .
This software its good but not for all cases.
How can we buy it cheper?:D

grinovsky
11th February, 2011, 11:25 AM
Sometime you have DTC and there its no fault,and that DTC can put your engine in limp mode .
This software its good but not for all cases.
How can we buy it cheper?:D

the error is humain
the machine never make mistakes

diagnoza_auto2000
27th February, 2011, 10:06 AM
Anyone test this software?

monitel_service
27th February, 2011, 10:14 AM
and name for this software

diagnoza_auto2000
27th February, 2011, 10:20 AM
and name for this software


DTC REMOVER

DTC Removal - Removes all DTC from ECU [DTC ALL] - €3,000.00 : CT Tools, Chiptuning tools (http://chiptuningtools.eu/index.php?main_page=product_info&cPath=3_11&products_id=35&zenid=f0b273faccf3903064abd082b284db44)