View Full Version : sprinter kienzle 96
jonek2
28th December, 2010, 08:46 AM
Hello. Do You have solution (pdf) how connect 14 cable tachouniversal to sprinter kienzle 96 year. In my cable is marked pin number one but i don't know where has come to tachograph
sepistar
29th December, 2010, 02:03 PM
try this:cable 14
? Remove the knobs from the tachograph from below the tachometer.
? Now remove the plastic cover.
? Behind a small aperture is to the right, with a red seal
secured. This seal must be removed to the programming
Jack expose.
? Now connect the Sprinter Kienzle plug to the programming socket
(red marking on the plug to the top) and the Tacho Universal.
? Turn off the ignition.
? From the Tacho Universal Mercedes Sprinter Kienzle diagnostic
? The Tacho Universal shows you the old value.
? Enter a new value.
? Confirm the new value with OK.
regards
jonek2
30th December, 2010, 06:33 PM
Problem is solved. This is instruction for tachouniversal, but in the manual there is no image with connection
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.