Blanking plate on the EGR valve

[super jumbe]

Any 1 can explane a diagram of how to fit a blanking plate on the EGR valve on the Vauxhall Signum 2.0D. dtI 2003-05. Engine code Y20DTH. Appreciate your help.

:cheer:

[Liteace]

Just remove the EGR, use the gasket as template but dont cut the hole in the middle, you may have to machine it a little to make sure its not pushing the valve open and also its got room for the EGR pin to move

[Liteace]

Ask the main dealer, they say (but no one know you "they" are) that they do a factory blanking plate !!

[oldford]

Completely blanking off the EGR will result in fault codes with Opel. Drill two 6 or 8 millimeter holes in the blanking plate.

[super jumbe]

So looking at that picture of the EGR do we make a plate to cover the entire centre hole were its secured with two bolts.

:cheer:

[Liteace]

Have a look here:

vauxhall egr blanking plate - Google Search (http://www.google.com/images?hl=en&expIds=17259,17291&sugexp=ldymls&xhr=t&q=vauxhall+egr+blanking+plate&cp=5&wrapid=tljp129373928793748&um=1&ie=UTF-8&source=og&sa=N&tab=wi&biw=1003&bih=537)

[super jumbe]

Man just the thing I was looking for I wish I can thank you 10 times. I suppose we could block EGR valve to any vehicles.
Thanks mate for your time.
:cheer: