PDA

View Full Version : siemens 5wp4181.immo



BATLER
31st December, 2010, 09:23 AM
hello to all,i need immo off for T4 transporter.flash 27c256.car is blocked by immo and i have to give a solution.key and immodox are ok but ecu dont accept pin for adaptation,maybe flash problem!any help appreciate

file attached:

mihai_vyt
31st December, 2010, 09:47 AM
1 OR 2 PLUGS?

BATLER
31st December, 2010, 09:49 AM
1 plug 38pins

kokkinos panos
1st January, 2011, 03:32 PM
did you managed to fix this ???

BATLER
1st January, 2011, 10:57 PM
hi again unfortunately i dont have a solution so far any help pls?

BATLER
2nd January, 2011, 10:16 PM
i tried to put immo off with immobox but no succes. i need a good dump for 27c256.car is 95year 2000cc 4cylinders.pls help to solve this problem...


:giveup::giveup::giveup:

BATLER
4th January, 2011, 08:39 PM
hello to all,i still have this car in my garage!!i need help with an other dump cause probably mine is bad. ANY HELP PLEASE!! :banghead::banghead:

mihai_vyt
5th January, 2011, 02:31 PM
read eeprom 93c56 and post dump

BATLER
5th January, 2011, 07:42 PM
no eeprom only flash!thank you

lupu_sandu
5th January, 2011, 07:48 PM
BATLER (http://www.digital-kaos.co.uk/forums/members/159037-batler/): In immo you have TMS or HC05?

BATLER
5th January, 2011, 07:52 PM
hc05 lupu.any ideas?

lupu_sandu
5th January, 2011, 07:59 PM
Try this dump (is not tested by me), but if this not work post dump from HC05.
Solution for immo off in immobox is tested.

bobbik
8th May, 2019, 02:43 PM
Guys, same car, same ECU, immobox missed, how to start it?
Any idea if file above works?