Galletto 1260 help [Sitemap]

azzpro

7th January, 2011, 12:22 PM

Hey

I have a problem, I recently bought a Galletto 1260 (clone I guess).
I installed attached drivers and got the USB Controller after I plug the cable called FTDI FT8U2XX.

My car is Citroen C5 2.0 HDI (2001-2004) with EDC 15C2 Bosch.

I plug the cable to the car (red light on), plug the usb cable to notebook (win xp sp3) and run the galletto software I recieve
information: "Opening port impossible".

Could any of you help me please?

Thanks in advance

banetv

7th January, 2011, 12:30 PM

Are you read here http://www.digital-kaos.co.uk/forums/f173/experience-galletto-1250-1260-tool-45024/index21.html#post916876 ?

azzpro

7th January, 2011, 03:03 PM

Yes I have read the whole thread ;/

cavignac

7th January, 2011, 04:35 PM

Are you read here http://www.digital-kaos.co.uk/forums/f173/experience-galletto-1250-1260-tool-45024/index21.html#post916876 ?

yes, I've read 21 pages, no interesting information
everyone says that clone bad, but the price is right
I found no galletto origin, if you find the price is very very expensive (not sure of origin)

mine, read data well, but reading ecu gives me ERROR SK1 -9

s there a someone who can help me, I'm grateful
(please do not repeat myself that is purple GALLETTO CLONE

I am looking for solution

thank you in advance

banetv

7th January, 2011, 07:27 PM

Galletto clone is good tool. I work with it abouth 1 year. Galletto software on supported CD is adjust for this hardware. You not will run other software via internet or other. But sometime work. Try it.

azzpro

7th January, 2011, 10:17 PM

Does anyone have the solution for "Opening port impossible" notification, I guess galletto support Citroen c5 2.0 hdi 2001-2004

MarkPRP

7th January, 2011, 11:00 PM

Yes, Unplug the cable. Leave a few seconds then plug it back in! off you go. it does it on mine everytime I use it!

cavignac

8th January, 2011, 12:12 AM

Galletto clone is good tool. I work with it abouth 1 year. Galletto software on supported CD is adjust for this hardware. You not will run other software via internet or other. But sometime work. Try it.
thank you for the answer

how to make it work

azzpro

16th January, 2011, 02:36 PM

I worked it out, I just used different Galletto software, the one I found as installation files on the board.