PDA

View Full Version : need original dump clio 1.2 16v



grinovsky
8th January, 2011, 11:22 PM
hi
next week it will come to me a clio 2 1.2 16v with ecu problems so it will be very helpful to me to have in advance one original file for this ecu(i don't find in my archive dump)
and the customer will come from very far
so thank you in advance for your help

gezame
10th January, 2011, 01:54 AM
Hi
Witch ecu?
Marelli 5Nr?
Siemens?
ref?
Regards.

grinovsky
10th January, 2011, 07:30 AM
i find this on the NET:
Fabricant : Magneti Marelli
R?f?rence : IAW 5NR2.C2
R?f?rence Renault : 8200181482
Compl?ment : 8200229098

grinovsky
10th January, 2011, 09:20 PM
no one have a dump for this car!!!http://www.2shared.com/photo/xL9KXgiS/clio12_16v.html

grinovsky
10th January, 2011, 10:04 PM
.................................................: D:D:D

bubu782001
12th January, 2011, 09:32 AM
I have a virgin ECU 5NR2.C5.
This ecu was just virginised by me with DDT so it is like in the factory. So in this moment it does not have any immo code stored as i say it is VIRGIN.
I will try to read eeprom.

grinovsky
12th January, 2011, 04:27 PM
thank you to reply
there is not probleme with immo the car start fine
the probleme with this ecu that it can be used for many cars like clio1.4,twingo,... so only the software is changed to adapte the ecu to engine
the customer had change ecu but it don't resolve the probleme as he say by phone(big black smok)
so if there is software for this ecu it will very helpful for me

bubu782001
14th January, 2011, 11:36 AM
the probleme with this ecu that it can be used for many cars like clio1.4,twingo

Nope. Sorry to say but, you are wrong my friend.

I guarantee you 100% that type of ECU's from picture that you just posted (Magneti Marelli 5NR series) are used ONLY on 1.2 16v Renault D4F engines or 1.0 16v Renault D4D engines.

There is ANOTHER model (a newer mode) of D4F engine, also 1.2 16V from Renault (in fact it is the same engine with exception of intake and injection system), that use Siemens S32 ECU.
Indeed that ECU (Siemens S32) is used on 1.4 and 1.6 Renault engines.

grinovsky
14th January, 2011, 02:59 PM
yes it's true i cheked all engines
i founded this information in supported list for galetto
think you to notify me:D

bubu782001
17th January, 2011, 10:54 AM
You found that information where? On one Website?
I tell you is wrong. Check official documentations from Renault.

grinovsky
17th January, 2011, 10:28 PM
it's more helpful for me if you upload the dump that i ask:wavey: because i don't open this post to ask for information
about what engines that use this ecu:pcguru:

mimielk
19th January, 2011, 09:01 PM
Hi!
I also have clio 1,2 16v...
I curse the day when i was buy this car.
Sell him soon is possible...this action will save you a lot of money...

Greetings, Tomi from Croatia