Help immo Clio Sirius32

[bmw320d]

Hi guys, I have an ecu Sirius32 used for a renault clio, I need remove immo
Thanks in advance ;-)

[martin292009]

cut pin 58

[bmw320d]

I must only cut pin 58? It can give problems with dashboard or A/C ?
Thanks

[bricolo]

Hi
Yes, only cut pin 58 and no problems

[bmw320d]

ok many thanks ;-)

[bmw320d]

Hi guys, I have tried but not work, with pin 58 cut not open the door e not run engine, with the pin 58 the door open and close with remote control but engine not start
Some solution?
Thanks

[cardoctor]

Read immo are store in fuse boxto get PIN
. Renew ecu with immotool ,
Use diagnosis to program PIN.

[damih]

Hello,try this test and report please
cut pin 58

[mikikarpa]

My dear friend
you must see the procedure of immo off sirius32,you cant only put the dump in a ecu.
1.you must read and safe the dump
2.put the dump immo off in eprom
Connect Engin ECU to the car,
ignition on!
Wait 30sek. or more
ignition off
3.Now return immo file what you read in 1step.
Now you cat the wire 58.
45935
Whip glad if I helped

[bmw320d]

thanks my friends but I have already solved, the car run ok

[waldi1979]

[QUOTE=mikikarpa;924001]My dear friend
you must see the procedure of immo off sirius32,you cant only put the dump in a ecu.
1.you must read and safe the dump
2.put the dump immo off in eprom
Connect Engin ECU to the car,
ignition on!
Wait 30sek. or more
ignition off
3.Now return immo file what you read in 1step.
Now you cat the wire 58.



Is it description" Srius32 or Fenix5?