View Full Version : Astra H 2006 - steering angle sensor
vwpd130
9th January, 2011, 10:18 PM
using op-com can anybody help in the calibration of the steering angle sensor on a 2006 astra??
im using opcom 090714
instructions??
thanks
:proud:
obdmaster
10th January, 2011, 12:18 AM
using op-com can anybody help in the calibration of the steering angle sensor on a 2006 astra??
im using opcom 090714
instructions??
thanks
:proud:
Not sure if 090714 will do it m8, it might.
On top of programming page in CIM unit there is a rectangular box which says "security code" hit that enter security code.
Then go back and hit box "steering angle sensor calibration" with vehicle stood still ignition on, steering straight forward "start activation".
Then your done
It got me first time because i never entered security code, and it wont work unless you do.
Hope this helps m8
eduardo74
27th October, 2011, 06:41 PM
I tried today procedure with OPCOM 8.2010, but without success. Entered in CIM, fault codes are B1012-00 and B3649-04. First one is for steering angle sensor not calibrated.
Entered in programming
then click SAS calibration, activate then wait wait and nothing? Do I need to drive car or what?
obdmaster
27th October, 2011, 06:42 PM
you must enter security code before it allows you to program steering angle sensor
eduardo74
27th October, 2011, 10:14 PM
Yes I did enter programming, then Security code, and opcom accept code.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.