PDA

View Full Version : read/write ISUZU ECU D-MAX



niwat_spp
11th January, 2011, 06:47 PM
Hi guys,

Everyone I want to read/write ECU ISUZU D-MAX and FORD RANGER TDCI . I have tool. CMD V1255 , CMD FLASH CAN V1251 , and EDC16 flaher all tool clone from chaina.:joyman:
thank a lot

risalelettronic
12th January, 2011, 12:58 AM
only bdm, read write and chsum tool calculated with delphi adapter

aidyk
12th January, 2011, 01:46 PM
isuzu d-max can write with galleto i have done them before and they normally have same ecu number.
i had to desolder psop44 to read ori file.
i have ori if you need it :) 3.0 model of course.?

ford tdci i use powergate normally cmd clone wont do it far as im aware.

niwat_spp
12th January, 2011, 03:20 PM
isuzu d-max can write with galleto i have done them before and they normally have same ecu number.
i had to desolder psop44 to read ori file.
i have ori if you need it :) 3.0 model of course.?

ford tdci i use powergate normally cmd clone wont do it far as im aware.
Oh good.I have galleto v1260 Please send me ori file and software for read/write
thank a lot
:joyman:

risalelettronic
13th January, 2011, 12:34 AM
isuzu d-max can write with galleto i have done them before and they normally have same ecu number.
i had to desolder psop44 to read ori file.
i have ori if you need it :) 3.0 model of course.?

ford tdci i use powergate normally cmd clone wont do it far as im aware.
3.0 ecus is delphi and is this
and bdm only

tomtom0785
14th January, 2011, 08:34 AM
not the newer ones - from Year 2007 on they have a transtron ECU with a Hitachi Processor - and it's not possible to do with BDM!!
only the Delphi ECU's

niwat_spp
15th January, 2011, 05:39 AM
not the newer ones - from Year 2007 on they have a transtron ECU with a Hitachi Processor - and it's not possible to do with BDM!!
only the Delphi ECU's
thank freind i will try with delphi

niwat_spp
18th January, 2011, 06:37 PM
thank freind i will try with delphi
http://i905.photobucket.com/albums/ac258/niwat1257/link2.jpg
I don't know my BDM ok or not
Please tell me .How to read write with BDM
regards

autotuning
1st February, 2011, 09:02 PM
check the position of pin 1 on BDM and make your power connections like this,
BTW delphi ecu was only fitted to 2.5 D-max the transtron was on the first 3.0 D-max and later 2.5>2007 (piasinni and V-Spire does these)
early rodeo (not D-Max) 3.0 is bosch edc15 under pass seat desolder psop44 not many files for these just auto and manual
early ford ranger is Mazda piasinni tool later is edc16+ most tools

weltune
10th September, 2011, 07:57 AM
check the position of pin 1 on BDM and make your power connections like this,
BTW delphi ecu was only fitted to 2.5 D-max the transtron was on the first 3.0 D-max and later 2.5>2007 (piasinni and V-Spire does these)
early rodeo (not D-Max) 3.0 is bosch edc15 under pass seat desolder psop44 not many files for these just auto and manual
early ford ranger is Mazda piasinni tool later is edc16+ most tools

hello
do you know which ic i should read & program if i can loan a car, reset by tech 2 than read it ?attached is some of the photo of the ic i have taken. please advise,
regards
alex

shay31
5th January, 2012, 03:28 PM
Hi

I need too

I someone know where is ic ??

Thanks
shay

autotuning
5th January, 2012, 09:36 PM
v-spire and piasini are the only tools i know that work with this ecu with hitachi processor maybe now K-TAG also look on alientech website.

S.W.A.M.I
4th March, 2015, 12:19 AM
does anyone know if kess or any tool do dmax transtron ecu OBD?

niwat_spp
4th March, 2015, 04:54 PM
kess v2 can do isuzu transtron via obd and fgtech original

S.W.A.M.I
5th March, 2015, 01:35 AM
kess v2 china clone can do via obd..

FritzP
30th March, 2015, 08:19 AM
does anyone know if kess or any tool do dmax transtron ecu OBD?

KessV2 (original tool of course) can read/write the Transtron ecu. I have done a few of these, no problem.

S.W.A.M.I
29th September, 2015, 08:27 PM
has anyone used k-tag on the delphi ecu to read/write ?

PierreTheron
29th September, 2015, 09:01 PM
I think on Delphi i used eeprom programmer and BDM

S.W.A.M.I
30th September, 2015, 07:36 PM
I think on Delphi i used eeprom programmer and BDM

which eeprom programmer and bdm tool did you use?

i only have windows 7

CLK1201
1st October, 2015, 02:00 AM
KTAG clone can read and write delphi isuzu ,test work 100%

jtbf
28th December, 2015, 01:44 AM
Hello,
For the isuzu dmax Delphi ecu, did you have to change any of the connectionson the Ktag clone??
Thank you.
jtbf

jtbf
11th February, 2016, 12:51 AM
Yes,

Ktag V2.10 (clone) works great on Delphi ecu via BDM (Isuzu dmax 2.5 2007).

carapauxxx
3rd April, 2019, 03:41 PM
i know i know its a very old Thread, but anyone know how to read and if its safe to write via obd an Isuzu Rodeo ecu Bosch EDC15M via obd?

PierreTheron
9th April, 2019, 09:18 PM
ktag should do .
But more info is required m8
1 line seems like no info to me m8.
So i am not going to waste my time to search for you on google with this little info .
All said i waisted a lot off time typing this ...

Boras
21st January, 2021, 09:14 AM
3.0 ecus is delphi and is this
and bdm only

Hi,
have somenone pinout for read write on bench this ECU? CAN bus?
Regards,
Boras