HOW TO READ 29BL802CB

[grinovsky]

how to read this ic 29BL802CB?

[rsibiza]

how to read this ic 29BL802CB?


With the right tool by OBD or BDM100

[grinovsky]

i don't have bdm100,do you think that willem can do it?

[rsibiza]

i don't have bdm100,do you think that willem can do it?


no...i dont think...

[grinovsky]

i read that there are a new adaptator for willem SSOP56
the latest version

[garageozcar]

you can read with any universal programmer but is crypted data, if you read with bdm tool is decoded directly,
i need i have soft for decoding file reading by universal programmer for decode edc16 file

push to THANKS

[grinovsky]

no,i don't think that it will be a crypted data,it will be a binary data that you can tune it by winols
when you tune a ecu like this the result will be perfect
i diagnose many cars that was tuned by obd you know what's the result? i communicate partialy with ecu(only read DTC) because the diag interface can't identify the ecu 100%

[bazare]

well it will not be encrypted but will take more time. Just buy a bdm100 from china ... is really cheap and you will have a backup solution from now on.

[florinyes]

BDM here too..just done a fap off on a zafira edc16 today..Can't get no better for the money

[grinovsky]

this week i will order BDM1000

[florinyes]

Just seen it very cheap on carsung...

Check it out mate..

[grinovsky]

Just seen it very cheap on carsung...

Check it out mate..

thank you very match that's what i ask exactly(it will be soon at home)

but the willem can do it also:D

[chli1976]

Should it go with XProg ?

I have a EDC16U1, but i can not read it with BDM100, with BS i can read it.

I have a problem by writing over OBD and now the ECU does not answere. I can not rescue it, because with BDM100 i have no connection.

Now i don`t know how to fix it.

[grinovsky]

yes why not,if you know the pin out

[rsibiza]

Should it go with XProg ?

I have a EDC16U1, but i can not read it with BDM100, with BS i can read it.

I have a problem by writing over OBD and now the ECU does not answere. I can not rescue it, because with BDM100 i have no connection.

Now i don`t know how to fix it.


If you had wrongly connected BDM pad to ecu you may burned the prozessor...in this case no more resque is possible.

[florinyes]

If you had wrongly connected BDM pad to ecu you may burned the prozessor...in this case no more resque is possible.


Been there mate..not long ago..Costly mistake that was..

[miha99]

Buy Xprog-M clone and don`t play with willem, edc16 costs to much!

[rsibiza]

Been there mate..not long ago..Costly mistake that was..


A friend ruined my new MED9.1 ecu for test his clone cmd bdm100 with evc probe ...

700? in the a.s.s.

Use the tools with it s own probes and check 3 times.

Check by finding ground pads,thus is safest way for ecu...

[grinovsky]

i have Xprog-m with V5 soft
i read that it do edc16,one member from DK(dfi) had help me and show me the connections (thanks a lot to dfi)
and i have a golf v tdi to remap,the customer wait a phone from me
if some think hapen to ecu the customer will kill me:help:

[chli1976]

A friend ruined my new MED9.1 ecu for test his clone cmd bdm100 with evc probe ...

700? in the a.s.s.

Use the tools with it s own probes and check 3 times.

Check by finding ground pads,thus is safest way for ecu...

The pin connection is right for my bdm 100. I have read other EDC16 and it`s ok.

[chli1976]

i have Xprog-m with V5 soft
i read that it do edc16,one member from DK(dfi) had help me and show me the connections (thanks a lot to dfi)
and i have a golf v tdi to remap,the customer wait a phone from me
if some think hapen to ecu the customer will kill me:help:


Can you read/write it with Xprog ?
Can you send me the connection please

Thanks

[grinovsky]

dfi say that he read /write ecd16 whit xprog-m
any other members can confirm this?
and for 3,3v i must do it too?

[bazare]

The safe way to work with a clone is to supply voltage to the ECU by pins not by BDM port. You can do this with all ECU.

[chli1976]

I have a BDM100 clone and use it with EVC probe.

[grinovsky]

yes ,but i see the pin's connectors for edc16u and i did't find the 3,3v!!!

[rsibiza]

I have a BDM100 clone and use it with EVC probe.

Yes,ut not with SPI10 connector1:1...between cmd and evc BDM SPI OUT canges,so you need invert wires from connector to connector. If not you would burn the ecu...

[chli1976]

Yes i have change the pins from connector, i have not connected 1:1

[paraver]

Hi to all,

Can somebody post correct pinout for connecting bdm clone to bosch edc16 with am29b802?

Thanks in advance

[gzk]

why don't you read it via obd
i have all those tools and mpps do it galletto too .
only use my bdm for cloning/backup/immo

my 2 cents

[choro]

Here's what I use and I have no problems
should only be soldered power (12V+ and 12V+ign. and mass-) directly to the pins of the connector
can easily be traced from the image

[choro]

in exactly