PDA

View Full Version : wanted BDM frame and probes


ka-pa-za
15th January, 2011, 04:44 AM
If anyone have a BDM frame and probes evc, alientech or cmd please contact me by pm.

regards.
chli1976
15th January, 2011, 07:53 PM
I search also for Bosch probe fom evc or cmd
Novik_UA
15th January, 2011, 08:50 PM
Bosh probes is really easy to make from Ebay BDM 100 ECU spring loaded probe adapter 12 position - eBay (item 250473213741 end time Jan-18-11 14:50:24 PST) (http://cgi.ebay.com/ebaymotors/BDM-100-ECU-spring-loaded-probe-adapter-12-position-_W0QQcmdZViewItemQQhashZitem3a515def2dQQitemZ25047 3213741QQptZMotorsQ5fAutomotiveQ5fTools)
Then solder male connector for BDM cable, and you have it !
batpepi
15th January, 2011, 09:41 PM
EVC and CMD probes are different place on pins.
I have both BDMs and can`t use one probes to other bdm.
ka-pa-za
16th January, 2011, 12:09 AM
EVC and CMD probes are different place on pins.
I have both BDMs and can`t use one probes to other bdm.

Friend of me want to use them on galletto. galletto evc is 1 on 1
galletto alientech is with adaptor provided by galletto

so no problems...
rentor61
26th February, 2011, 04:01 PM
hi i have frame and probes evc whit BDM 100 clone but not start do you can helpme???