PDA

View Full Version : MagPro2



Pages : [1] 2

vanya86
16th January, 2011, 03:15 AM
If someone need it.

Click thanks.

I need ECM2001 titanium.


pass: dexterlab

venigo
16th January, 2011, 05:18 AM
Password of the file?

rappttor
16th January, 2011, 08:14 AM
password ?

nick76_1
16th January, 2011, 11:41 PM
Password? Thanx

macxlulu
16th January, 2011, 11:48 PM
http://www.sinodownloads.com/down/download/ecutool/3514012KESSV1.rar


:cheer::cheer::cheer::cheer::cheer::cheer:

Click thanks

zecas
16th January, 2011, 11:52 PM
hi

what version is it??

regards

macxlulu
16th January, 2011, 11:55 PM
hi

what version is it??

regards

Magpro2 ver.3.0

zecas
16th January, 2011, 11:56 PM
Magpro2 ver.3.0

very old i look fore 4.1

regards

bazare
17th January, 2011, 10:03 AM
what are the changes from 3.0 to 4.1 only for the magpro2, not together with x17. And is the clone usable with x17 module original?

stk90
17th January, 2011, 12:40 PM
I have all the information you need.
I also have the soft magpro the latest version.

If someone helps me to dump 's mpps can help or pass the software via pm.

I hope you might be interested

rsibiza
17th January, 2011, 01:05 PM
what are the changes from 3.0 to 4.1 only for the magpro2, not together with x17. And is the clone usable with x17 module original?


I have all the information you need.
I also have the soft magpro the latest version.

If someone helps me to dump 's mpps can help or pass the software via pm.

I hope you might be interested


There are actually a some little problems:

1. X17 wont be sold without lizense from MagPro2 base setup

2. Last 3 Updates i made by theyr server,i had to ask always new activation code,this is to secure updates for ori tools...

I actually ignore if there is also tool serial to soft serial blacklist or something.

rsibiza
17th January, 2011, 01:06 PM
what are the changes from 3.0 to 4.1 only for the magpro2, not together with x17. And is the clone usable with x17 module original?


In fact X17 is called plugin,but is separate from MagPro2 and could run without having MagPro2

stk90
17th January, 2011, 01:12 PM
I have version 4 and I can assure you that it works on the clone.
I never tried with x17

milanoffracing
17th January, 2011, 01:58 PM
I have version 4 and I can assure you that it works on the clone.
I never tried with x17

Mate, please upload version4 if it's possible.

Novik_UA
17th January, 2011, 02:03 PM
http://www.sinodownloads.com/down/download/ecutool/3514012KESSV1.rar


:cheer::cheer::cheer::cheer::cheer::cheer:

Click thanks
What about hardware ?

cardoctor
17th January, 2011, 04:04 PM
What about hardware ?

Hardware its no free.
Find it in google. You will found..

Novik_UA
17th January, 2011, 07:36 PM
I understand that.
When somebody have hardware ( clon or genuine), than software is included. So question is: what for is software without hardware.

gezame
18th January, 2011, 01:47 AM
Mate, please upload version4 if it's possible.

Hi friend.
MEGAUPLOAD - The leading online storage and file delivery service (http://www.megaupload.com/?d=GUTCJ86C)
You have pm.
Regards.

vanya86
18th January, 2011, 01:50 AM
Is possible to get PCB and HEX for this MAGPRO tool

japan62
18th January, 2011, 03:32 PM
Hi Vanya86...i've interest in Magpro pcb and Hex...
Please contact me in PM...
Jap

Mecatech
18th January, 2011, 04:12 PM
Hi Vanya86...i've interest in Magpro pcb and Hex...
Please contact me in PM...
Jap


im interest too in both

contact thru PM, if you can
thanks in advance

tinaca
18th January, 2011, 10:28 PM
I'm also interested if powers
get very thankful since already.

hug and thanks:fisheye:

ominimicu
18th January, 2011, 10:36 PM
WHere coud i get my hands on clone Magpro?

ipejasinovic
18th January, 2011, 10:39 PM
Ahaha. Nice try guys. Here is pic of KESS V1 HW (MagPro2 is same). Just look at biggest MCU (CPU)! If still not clear, then f*ck it...

Samaelson
18th January, 2011, 10:45 PM
Hi guys,

if anyone has working files for interface please pm!

Best regards

vanya86
18th January, 2011, 10:52 PM
Ahaha. Nice try guys. Here is pic of KESS V1 HW (MagPro2 is same). Just look at biggest MCU (CPU)! If still not clear, then f*ck it...

LOL :) Infineon.

Da se nabaviti ali gdje dumpove naci.

ipejasinovic
19th January, 2011, 12:58 AM
Ofc that you can get CPU and ofc that you can get dump, but at what cost?! So, please, don't ask for free dumps. Just, don't...

vanya86
19th January, 2011, 01:23 AM
Hahahah nothing is free. I didn't ask anything, i have allready MPPS good working clone made my self.

This KESS is same for my type of job. I just ask is there anyone who has it.

ominimicu
19th January, 2011, 02:11 PM
Kess clone and Magpro clone are the same? which should I buy?

ipejasinovic
19th January, 2011, 03:35 PM
Kess is original maker. MagPro2 and Flashtec are clones of it.

ominimicu
19th January, 2011, 11:35 PM
i found a seller that sells KEss v13.x clone. And thought these are different from MAGpro. i dont know which to buy

ipejasinovic
19th January, 2011, 11:58 PM
It's same which ever you buy, because they are same. You can use MagPro2 sw with Kess hw and vice versa. Kess and MagPro2 hw only have different connector from device to OBD2 cable...

subtil
20th January, 2011, 11:28 AM
Just remember with magpro2/kess clone you can't do neither bmw edc16 nor 17.
Will have to wait for a definitively reliable mpps clone for the bmw edc16.

ipejasinovic
20th January, 2011, 11:49 AM
Yeah, they don't have support for EDC16 from BMW. Good MPPS clone can do them without any problem, but MPPS also don't have support for EDC17 from BMW.

ominimicu
20th January, 2011, 01:59 PM
screw BMW..i can live without it hahah. ipejasinovic , do you sell any update for S MPPS? that can do BMW edc16? i have version 1.x.something. ? (http://www.digital-kaos.co.uk/forums/members/56306-ipejasinovic/)

ipejasinovic
20th January, 2011, 02:29 PM
On S-MPS devices, problem isn't fw but hw. New MCU won't help you a lot...

subtil
21st January, 2011, 01:02 AM
Yeah, they don't have support for EDC16 from BMW. Good MPPS clone can do them without any problem, but MPPS also don't have support for EDC17 from BMW.

That is correct mate. D'you know who sells them cheap and reliable on bmw edc16?

rsibiza
22nd January, 2011, 05:25 PM
With ori MagPro2 and X17 module u have EDC17 and BMW EDC16 support..

VAG EDC17 most without internet connection:hello:

bazare
23rd January, 2011, 10:51 PM
indeed it's a very good tool magpro2 +x17 but for those who do this only for fun and hobby price isn't affordable anymore. 2700+ euros

viki300
24th January, 2011, 02:59 PM
i Quess you need to be connected to car and then instal drivers and then should be ok

gezame
26th January, 2011, 12:20 AM
i have all project magpro2 but not for free

br
cp

Hi
Nice first post.
I think you have the wrong forum ....
Regards.

rsibiza
26th January, 2011, 02:11 PM
i have all project magpro2 but not for free

br
cp


Your FIRST POST:ciao:

I have ...but not Free...???

Try on flebay.....dont u think...Here is no foocking flebay....

vanya86
27th January, 2011, 04:39 AM
LOL

Put your project on forum, maybe we buy it :D

zecas
28th January, 2011, 07:41 PM
ok, please pcb :)

br
carprog

interesting same pcb as chinese ones

soundnavigator
28th January, 2011, 07:43 PM
This is not MAGPro2 version, perhaps MAGPro1, like KESS1 and other .

Best regards.

bazare
29th January, 2011, 09:50 PM
if anyone have this clone just post some pictures of the PCB

moky
31st January, 2011, 10:55 AM
Someone can post software magpro V4 with serial please ?



thx!




.

bazare
31st January, 2011, 11:16 PM
v3 and v4 already posted use serial from v3 to v4 ... it works, tested.

aerokbzas
2nd February, 2011, 01:53 PM
May I use Magpro2 V4.0a software with cloned Flashtec?
Is there any MPPS like problem? Now I?m working with Flashtec 13.1 soft.
Thanks.

bambula tuner
11th March, 2011, 01:16 PM
Hallo at all (o:

i have a question i wont toi read a bosch me7.4.6 from a peugeot 407 Coupe. is it possible with my magrpo clone? because this Car i cant find in the Driver list. i have testet the Magpro2 clone on other ECU`s it works very well (o:

thanks for your answer

bazare
11th March, 2011, 05:03 PM
if it's not in the list ... it won't work

marujon
11th March, 2011, 11:58 PM
where to buy a kess v1 or v2 clone? Temm me if ther is a kess v2 clone... or all are kess v1...

bazare
12th March, 2011, 08:44 AM
there is no kess v2 clone ...

scarymistake
17th April, 2011, 10:48 AM
Hi friend.
MEGAUPLOAD - The leading online storage and file delivery service (http://www.megaupload.com/?d=GUTCJ86C)
You have pm.
Regards.
Thanks man

http://img546.imageshack.us/img546/1994/afbeelding1n.png
works very well with a clone :beer:
http://img696.imageshack.us/img696/4356/1112410166.jpg

if you have a newer software please let us know PLEASE

bestr.
scary

mysamed
17th April, 2011, 05:46 PM
setup serial help me ?

bts
19th April, 2011, 09:56 PM
MAGProg2 Ver:4.0 picture

enzucciomio
25th April, 2011, 08:27 PM
Did you found any issue when writing tuned file over new Alfa Giulietta (105HP or 170HP) with MagPro2 4??

I did.....altough reading was ok.

I received Negative ECU response on trying to flash erase !!

Please suggestion...

btr
27th April, 2011, 07:40 PM
MAGProg2 Ver:4.0 picture
Does you test this soft with clone kess ?work well?

enzucciomio
29th April, 2011, 11:33 AM
BTR: what do you mean for kess clone? HW interface?

I'm using it (with MagPro 4 software) but unsuccessfully...

bazare
29th April, 2011, 11:54 AM
forget about the clone ... magpro2 is already at v4.2 and a lot of new cars are added now. Buy the original, and you will have the support that is really great.

kokoevil
29th April, 2011, 12:12 PM
Password of the file?
es bueno este interface?

enzucciomio
29th April, 2011, 02:25 PM
indeed HW interface seems OK with this version, infact reading is ok....i think that this new "Alfa" configuration is to be fixed in newer version

ipejasinovic
29th April, 2011, 02:30 PM
New software for these clones will be available soon with a little bit more cars, but don't expect miracles and new ECU's, only some cars which aren't in list currently.

enzucciomio
29th April, 2011, 02:49 PM
ThankYou for letting me hoping....EDC16Plus (Giulietta, Mito & 159) is already supported in 4.0 but perhaps not latest Bosch releases!

Overtune
7th May, 2011, 12:14 AM
I have newer versions like 4.1, but the serial number is changed in these versions, and it is not good to share the serial number...it is from a genuine user.If you want the software i can upload, but it would be useless without the correct password.

aerokbzas
8th May, 2011, 12:33 PM
Hello Overtune,

Can you please share the 4.1 or 4.2 software version?

Thanks & regards.

Overtune
8th May, 2011, 07:14 PM
Yes i will when i get some free time on my schedule

enzucciomio
10th May, 2011, 10:56 AM
...please share...

(other issues on K-line applications with EDC15C7 --> NO INIT)

thank you!

bazare
10th May, 2011, 04:15 PM
Just buy the original MAGPRO2. great tool, very reliable, and great support!

mimmo2011
21st May, 2011, 01:47 PM
MEGAUPLOAD - The leading online storage and file delivery service (http://www.megaupload.com/?d=DNPAP8L6)

MAGPRO2 CLOANE V 4.1
CHIEDE ID

mysamed
23rd May, 2011, 03:12 PM
hi send please stabilite car list clone interface
thank you

eduardo74
23rd May, 2011, 05:10 PM
MEGAUPLOAD - The leading online storage and file delivery service (http://www.megaupload.com/?d=DNPAP8L6)

MAGPRO2 CLOANE V 4.1
CHIEDE ID

Id is not 12....8

bazare
23rd May, 2011, 06:50 PM
in a few days magpro2 will get new update ... 5.0 with a lot more ECUs and CARs including SID 305

scarymistake
24th May, 2011, 01:25 PM
MAGPro2 V4.2 X17Modul and BDM

http://img534.imageshack.us/img534/5855/afbeelding1rz.png
http://img14.imageshack.us/img14/4950/afbeelding2kk.png
http://img543.imageshack.us/img543/2370/afbeelding4x.png
http://img64.imageshack.us/img64/5287/afbeelding5v.png



https://rapidshare.com/files/3430895092/MAGPro2_42_by_Alex69.rar

RAR CODE
scary01

with the collaboration of:
Alex69 Tuning Runner

aerokbzas
24th May, 2011, 01:51 PM
May I have the password please?

Thanks & regards.

mysamed
24th May, 2011, 04:48 PM
hi send me please password and bdm tools eeprom dump send me
thanks

chiptorque
24th May, 2011, 05:32 PM
very good contribution I'd like to try it ... I can send the password? thanks ...
and does the famous X17 module exchanges with protection?

thanks in advance

mimmo2011
24th May, 2011, 11:12 PM
MAGPro2 V4.2 X17Modul and BDM

http://img534.imageshack.us/img534/5855/afbeelding1rz.png
http://img14.imageshack.us/img14/4950/afbeelding2kk.png
http://img543.imageshack.us/img543/2370/afbeelding4x.png
http://img64.imageshack.us/img64/5287/afbeelding5v.png



https://rapidshare.com/files/3430895092/MAGPro2_42_by_Alex69.rarRar code in PM
when not needed I will hear it from DK
so i can give the code here

with the collaboration of:
Alex69 Tuning Runner

ciao,
? possibile avere la password?
io ho la versione 4.1 ma serve codice id che io non ho

mimmo2011
24th May, 2011, 11:23 PM
May I have the password please?

Thanks & regards.

speedy100
24th May, 2011, 11:58 PM
Thank You :)
Can I have the password please?

Best Regards

scarymistake
25th May, 2011, 05:10 AM
Rar code send to:
mysamed
stk90
aerokbzas
macxlulu
speedy100
mimmo2011
chiptorque
:stickyman::stickyman::stickyman::stickyman:

lolooo1981
25th May, 2011, 05:38 AM
Very good !
Can i have the password please ?

Thanks in advance

electrix
25th May, 2011, 05:39 AM
Hi, please send me pass.

Best regards.

scarymistake
25th May, 2011, 06:26 AM
Rar code send to:
lolooo1981
electrix
:stickyman::stickyman::stickyman::stickyman:

yas200979
25th May, 2011, 09:01 AM
Thank You
Can I have the password please?

Best Regards

AyceeDeeCee
25th May, 2011, 09:05 AM
Password please :)

scarymistake
25th May, 2011, 09:33 AM
Rar code send to:
yas200979
AyceeDeeCee

:stickyman::stickyman::stickyman::stickyman:
what's new in v4.2
CITROEN Berlingo 1.6HDi EDC16c34
CITROEN C5 II 2200 16V HDI 170HP EDC16CP39
DACIA Duster 1500 dCi 86 HP Delphi E4
DACIA Duster 1500 dCi 105 HP Siemens SID301 CAN
FIAT Alba 1400 77HP MARELLI IAW5SF
FIAT Ulysse II 2200 16V HDI 170HP EDC16CP39
FORD Transit 2.4L TDCi MY 2011 VISTEON
LANCIA Phedra II 2200 16V HDI 170HP EDC16CP39
NISSAN Primastar 2.5 dCi EDC15C2
SUZUKI Vitara 2000 HDI 90HP SID801
Resolved bug checksumm PSA EDC16+
Added several seed keys.

yas200979
25th May, 2011, 09:56 AM
This soft worket china KESS CLONE?

enzucciomio
25th May, 2011, 11:54 AM
did anyone found issue in writing EDC16+ file (sw F42) of Giulietta 1.6 ? i'm currently receiving negative response on flash erasing!

(MagPro 4.2)

thank you for attention

ipejasinovic
25th May, 2011, 12:16 PM
Try with slow speed, but best is to take out ECU and try on table.

enzucciomio
25th May, 2011, 02:06 PM
no success.....i fear there is a protocol problem (request out of range) so a specific "driver" for that cars in MagPro!

doslamer
25th May, 2011, 03:27 PM
Password please :)

scarymistake
25th May, 2011, 03:33 PM
Rar code send to:
doslamer
:stickyman::evil::stickyman::evil:

glk96000
25th May, 2011, 03:38 PM
Hi scarymistake

Rar pass please

scarymistake
25th May, 2011, 07:06 PM
Rar code send to:
doslamer
kam306
yas200979
AyceeDeeCee
lolooo1981
electrix
mysamed
stk90
aerokbzas
macxlulu
speedy100
mimmo2011
chiptorque
Metin
teo32
:stickyman::evil::stickyman::evil:

akıncı
25th May, 2011, 10:06 PM
Hi, please send me pass.

Best regards.

P2XA
25th May, 2011, 10:21 PM
Try this without PW:https://rapidshare.com/files/3410260787/MAGPro2_42_by_Alex69.rar

scarymistake
26th May, 2011, 05:13 AM
Rar code send to:
doslamer
kam306
yas200979
AyceeDeeCee
lolooo1981
electrix
mysamed
stk90
aerokbzas
macxlulu
speedy100
mimmo2011
chiptorque
Metin
teo32
ak***305;nc***305;
:stickyman::evil::stickyman::evil:

boss151
26th May, 2011, 08:42 AM
Please send me code..
Besr rgs.

scarymistake
26th May, 2011, 09:24 AM
Please send me code..
Besr rgs.
LOOK HERE
http://www.digital-kaos.co.uk/forums/f173/magpro2-184351/index5.html#post1110858

or use

scary01

luco7
26th May, 2011, 09:39 PM
ciao,
? possibile avere la password?
io ho la versione 4.1 ma serve codice id che io non ho
Please send me code..

scarymistake
27th May, 2011, 06:08 AM
Please send me code..
Scroll two posts back
and look here is the code

Please


read-read-read


Please

btr
27th May, 2011, 02:52 PM
LOOK HERE
http://www.digital-kaos.co.uk/forums/f173/magpro2-184351/index5.html#post1110858

or use

scary01
Does anybody tried this software with clone kess?:pcguru:

ankara06
27th May, 2011, 04:53 PM
pass please..and is it compatible with clon interface ?

cartechnics
28th May, 2011, 04:42 PM
hi
i have a problem with alfa giulietta 1.6 JTD
read 22 min ok
write not possible in fast medium and slow
the car start .........
and so trouble with any option in the car

yas200979
29th May, 2011, 07:51 AM
pass please..and is it compatible with clon interface ?

I tested. Work CLONE GOOD!

barti122
1st June, 2011, 10:06 PM
wher buy clone interface please links

Zwyrol
1st June, 2011, 10:26 PM
Work good with Ford protocol and VW PPD

cartechnics
2nd June, 2011, 12:41 PM
mag pro 2 on DENSO 3L DCI 177 renault NOT WORK

soundnavigator
2nd June, 2011, 02:45 PM
mag pro 2 on DENSO 3L DCI 177 renault NOT WORK


... with original or clone tool ? If you use original, use support in helpdesk and maybe they will be resolve the problem.

Best regards.

eduardo74
2nd June, 2011, 05:40 PM
Today tested on Renault Scenic II edc16c3 not working, cannot recognize ecu?

ominimicu
2nd June, 2011, 09:35 PM
So anyone offered you the titanium ?

mimmo2011
2nd June, 2011, 10:59 PM
wher buy clone interface please links

HELLO.
I HAVE BOUGHT THE CLONE SITE FROM ITALIAN.
GOOD WORK
MADE IN ITALY

mec
3rd June, 2011, 12:29 PM
hi,
i have original magpro2 , but i not pay for update

if have somebody update and drivers
my last version is 3,0

thx,mec

yellowstilo
5th June, 2011, 02:27 PM
version 4.2 is posted here, including the RAR password....

cartechnics
6th June, 2011, 05:08 AM
... with original or clone tool ? If you use original, use support in helpdesk and maybe they will be resolve the problem.

Best regards.

clone with 4.2 program

cartechnics
6th June, 2011, 05:12 AM
clone with 4.2 program

and not work with renault edc 16 i confirm
not work with giulietta (on write read ok 25 min)
and not work with ME7.5 ibiza 1.8 20VT
not work on DENSO velsattis 3L V6 DCI
WHY ??????
test on 206 2L HDI 90 all good
306 HDI 90 all good
golf 4 tdi 100 all good

i have test all speed slow medium fast

yellowstilo
6th June, 2011, 06:10 AM
i used a clone magpro2 with the 4.2 software (copied registration files) on my Fiat Stilo 1.6 with IAW5NFT1 ecu.
It reads o.k. but refuses to accept any of the writing speeds and only sometimes it generates a message ""invalid key" after trying to write.
I choose the correct family with the 5NF ecu , in the meanwhile i have learned these ecu's are a real pain to write....(tried Magpro2, KWP2000+, MPPS and Galletto clones)
The only tool which managed to write up to 100% was the Galletto 1260 but that one generated a checksum error at the end and blocked a testecu.
Anyone has any suggestions for writing this ecu successfully?
As i'm only a hobbyist and only use this for my own car the real tools are no option for me...

rappttor
6th June, 2011, 10:50 AM
as i said, i have one briked on my table, the event happend after a writing process with a clone galetto, 99% and after cks error. it came in this state to me and i never was able to restore it with any tools i tryed. inside is a micromotorola and as far as i know it has a second cks on the file, i still dont know why, maybe related with the eeprom.
i dont know if you can get it in boot mode, and dont know any tool to be able to write so, unfortunatelly.
i'm interested in this subject, keep me posted if you find something.
br

cartechnics
6th June, 2011, 06:06 PM
i have test with mag pro 2 4.2 clone on FORD focus 1.6 TDCI 109 HP i have read ok
mod ok
but cheksum error
i have remake the cheksum with ols
not work mag pro cheksum error ??
in winols cheks ok
in titanium cheks ok
???
the mag pro2 software has encoured an error in cheksum and dont want program
sorry for my english i am french

eduardo74
6th June, 2011, 11:42 PM
As I says, 4.2 with clone not recognize EDC16C3 from Renault. Anyone tried to remove ECU from car and test it on desk?

alclot
8th June, 2011, 08:07 PM
Hello everyone. I have questions that I think has more than one. I found these two clones:
MAGPRO2 CLONE
MAG PRO2 V4.1 ECU tuning tool for sale (http://www.uobd2.net/wholesale/mag-pro2-v41-ecu-tuning-tool.html)
KESS v1 CLONE
KESS OBD Tuning Kit for sale (http://www.uobd2.net/wholesale/kess-obd-tuning-kit-1977.html)

Are the two interfaces are equal in terms of hardware?
Will the software 4.1 for example goes for 2?
If not the same. What are the differences?
Is it worth buying a clone?
Will units in bootmode reads well?
.....
It is very interesting topic.
Greetings and thanks.

zecas
9th June, 2011, 12:52 AM
Hello everyone. I have questions that I think has more than one. I found these two clones:
MAGPRO2 CLONE
MAG PRO2 V4.1 ECU tuning tool for sale (http://www.uobd2.net/wholesale/mag-pro2-v41-ecu-tuning-tool.html)
KESS v1 CLONE
KESS OBD Tuning Kit for sale (http://www.uobd2.net/wholesale/kess-obd-tuning-kit-1977.html)

Are the two interfaces are equal in terms of hardware?
Will the software 4.1 for example goes for 2?
If not the same. What are the differences?
Is it worth buying a clone?
Will units in bootmode reads well?
.....
It is very interesting topic.
Greetings and thanks.

i found this FlashTec v13.1 PROFESSIONAL MASTER CHIP-TUNNING INTERFA on eBay (end time 17-Jun-11 00:54:45 BST) (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=160589726634&ssPageName=STRK:MESELX:IT)

it claims that it works with 4.0, 4.2 and with flashtec 13.1

youk
9th June, 2011, 11:24 AM
have you the magpro2 v4.2 installer without serial number ?

zecas
9th June, 2011, 02:42 PM
i have with serial number for 4.0 i think newer version have been posted in this forum

alclot
9th June, 2011, 09:48 PM
i found this FlashTec v13.1 PROFESSIONAL MASTER CHIP-TUNNING INTERFA on eBay (end time 17-Jun-11 00:54:45 BST) (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=160589726634&ssPageName=STRK:MESELX:IT)

it claims that it works with 4.0, 4.2 and with flashtec 13.1

Hi again. Is this clone can read the micro ST10F280 IAW4TV ECU with bootmode?
Thanks ;)

zecas
10th June, 2011, 11:31 AM
i dont see it in the supported list probably not

eduardo74
21st June, 2011, 08:57 PM
All clones are sh*t! Dont waste your money, kess, magpro, flashtec... same sh*t! You will find more than 90% not working, or in most cases you can read ECU but will not write. Support is 0%

ominimicu
22nd June, 2011, 09:11 AM
anyone managed to read a Clio 1.5dci delphi DDCR ?

elm329
22nd June, 2011, 02:25 PM
hi all,i have magprog2 pcb and hex

VTL511
22nd June, 2011, 10:07 PM
what a good working clone for MED17?

Mecatech
24th June, 2011, 10:52 PM
hi all,i have magprog2 pcb and hex

can you share it, please?

Meca

Overtune
24th June, 2011, 11:18 PM
Can anyone post here The ftdi ept from magpro2 BDM?

Deja5
29th June, 2011, 09:54 PM
Hi to ALL!

I just received my Kess clone, it comes with Magpro2 V3.0 soft.
May I use Magpro2 V4.2 from Scary without problem like kill my
interface?

Regards

eduardo74
29th June, 2011, 10:30 PM
Yes Deja5, you can use it with v4.2 also Flashtec, expi...

DemolitionMan
4th July, 2011, 07:45 AM
hi -.. pass pm


please ...... thanks

todos
17th July, 2011, 06:50 PM
:marchmellow:Hello, can send me the pass thanks

Mario32
17th July, 2011, 07:07 PM
Can I have the password.

Thanks in Advance.

albematty
18th July, 2011, 03:08 PM
Hello, can send me the password thanks

scarymistake
18th July, 2011, 03:18 PM
For the last time
For those who can not read:wink:

http://www.digital-kaos.co.uk/forums/f173/magpro2-184351/index5.html#post1110858

edc
20th July, 2011, 06:26 PM
what about magpro2 clone and vag edc16 ecu's ... any problems ?

edc
20th July, 2011, 07:04 PM
and one more thing : please give some link to a good,tested clone of magpro2 to buy ... can be on PM ...

filoxio77
20th July, 2011, 11:24 PM
Can I have the password.

Thanks in Advance.:party :

yellowstilo
21st July, 2011, 06:14 AM
did you read this post with your eyes closed ??

please READ !!

powertdi
23rd July, 2011, 11:06 PM
Is the anyone tested clone of magpro2 with MED17 or EdC17 on TP or UDS protocol? I not sure it will work. Comfirm please.

bazare
24th July, 2011, 09:51 AM
magpro2 base don't have edc17 in car list ... so it's impossible to work. Buy the original x17 and will do the job flawlessly. Always buy original tools if you don't want troubles.

kti1970
24th July, 2011, 09:43 PM
pass please pm
thanks ......

J_amb_o
25th July, 2011, 10:27 PM
I have seen the Magpro2 clone, but is there an X17 module clone?

filoxio77
25th July, 2011, 11:01 PM
Hello guys I have a problem with the MAGPro2 clone, I successfully installed the software v4.2, drivers installed correctly and when I click on data after 3 seconds gives me an error "error step 3", the h tried everything, changing speeds, driver of the car, etc. .... you know nothing but help me please?

bazare
26th July, 2011, 09:39 AM
magpro2 clone is history ... the new v5 is clone proof.

noriginal
26th July, 2011, 12:53 PM
for me is your magpro of bad quality
with my magpro write perfect

my magpro is clone of kess
don't is clone of magpro

bye

lolooo1981
26th July, 2011, 05:34 PM
Kess clone or magpro2 clone are the same hardware no?

jmush303
26th July, 2011, 10:46 PM
Not exactly
for me i have original kess v2 its more sure
pas exactement
pour moi je pr?f?res avoir l'original plus sure
salutations compatriote !!

lolooo1981
26th July, 2011, 11:00 PM
For me i have fresh magpro2 clone but I did not have another opportunity to test it seriously.Compenent are the same no has kessv2 no ?
Salutations camarade !

noriginal
29th July, 2011, 12:09 AM
Kess clone or magpro2 clone are the same hardware no?

no there are little differents
i have all 3 differents clone,
one clone of kess and two clone of magpro

internal of kess is more big and have a perfect hardware

magpro black in alu box internal is different (no more) and also is very good hardware

other magpro is in a blu box and it is of bad quality hardware, more economic and more problems (k-line).

enzucciomio
29th July, 2011, 08:35 AM
....but is there a work around for those problems (k-line) ???

thank you

bazare
29th July, 2011, 08:38 AM
the best workaround for this K line problems is to buy the original tool. And you will also have the best support in the business.

btr
29th July, 2011, 11:48 AM
no there are little differents
i have all 3 differents clone,
one clone of kess and two clone of magpro

internal of kess is more big and have a perfect hardware

magpro black in alu box internal is different (no more) and also is very good hardware

other magpro is in a blu box and it is of bad quality hardware, more economic and more problems (k-line).
I have magpro in alu blue box and black alu clones,all interfaces work perfect with k-line,and can-bus :ciao:

noriginal
31st July, 2011, 01:55 PM
I have magpro in alu blue box and black alu clones,all interfaces work perfect with k-line,and can-bus :ciao:

blue box from italy is very very bad
best a china clone !! have test all
why do you have two magpro clone??

btr
31st July, 2011, 03:02 PM
blue box from italy is very very bad
best a china clone !! have test all
why do you have two magpro clone??
I have not noticed any difference between them.
First I bought is faulty (black aluminum), I bought another, blue, before I repaired it

lolooo1981
31st July, 2011, 10:00 PM
I have magpro2 clone black alu box V4.20 and for the moment work very good, no fail.
But who have problem with it ?and in what ECU ?
Please let me now.

Best regards

yas200979
31st July, 2011, 10:08 PM
When it was necessary to register atomizers on Laguna3, magpro4,2 hasn't made it, has requested an activation code. Has registered the old version.

eduardo74
31st July, 2011, 10:14 PM
I have magpro2 clone black alu box V4.20 and for the moment work very good, no fail.
But who have problem with it ?and in what ECU ?
Please let me now.

Best regards

Hello loloo1981,

I have problem with several ECU, first one EDC16C3 Renault Scenic II, after that tested on Mercedes Benz W211 EDC16C2, also VW Sharan EDC16U31, without success.

btr
1st August, 2011, 08:37 AM
no there are little differents

internal of kess is more big and have a perfect hardware

magpro black in alu box internal is different (no more) and also is very good hardware

other magpro is in a blu box and it is of bad quality hardware, more economic and more problems (k-line).
Is the difference significant element of the content?:hmmmm:

psico
1st August, 2011, 10:22 AM
i have clone box alu blue buy in http://magik-tool.com/index.html with vers 4.2a

And i block ecu bosch edc15 c2 peugeot 307 hdi 110cv ,14% no write and block....k line. bad interface.
I have clon china , and run perfect in k line and can.

and the price...............

FastGas
1st August, 2011, 11:12 AM
Is the difference significant element of the content?:hmmmm:

from the photos you notice that the "box alu blue" is very well done, but the "box alu black" has many components with bad welds:hmmmm:

psico
1st August, 2011, 12:29 PM
and....the question is?

Blue best or black.

....the components of blue see best quality ,but run best black?

lolooo1981
1st August, 2011, 05:56 PM
My black alu box very good weld and is not china clone.Inside good work made.

Best regards

lolooo1981
1st August, 2011, 06:10 PM
My magro2 black box is not chinese clone and is very well weld no problem in this case.

Best regards

btr
2nd August, 2011, 06:08 AM
i have clone box alu blue buy in http://magik-tool.com/index.html with vers 4.2a

And i block ecu bosch edc15 c2 peugeot 307 hdi 110cv ,14% no write and block....k line. bad interface.
I have clon china , and run perfect in k line and can.

and the price...............
I reflash with blu alu edc15c2,without problem,my clone from china.Choose low speed,or truly your interface spoilage.

btr
2nd August, 2011, 06:23 AM
from the photos you notice that the "box alu blue" is very well done, but the "box alu black" has many components with bad welds:hmmmm:
alu black have port to reflash interface firmware jtag(db25),blue box have socket for firmware chip;pin's out from chip to obd are one to one,but different sockets to obd.pcb no diffrent.

youk
2nd August, 2011, 10:00 AM
hi, magpro2 5.0 is on the official site

I want this software

alfy
2nd August, 2011, 10:13 AM
hi, magpro2 5.0 is on the official site

I want this software

To do what???
I have it, but will not work with clone tools!

psico
2nd August, 2011, 10:44 AM
To do what???
I have it, but will not work with clone tools!

friend.....time....
mpps clon , run with ultimate vers...

magpro clon....run


: Celticscarf:

markovojvodic
2nd August, 2011, 10:46 AM
pass ?

youk
2nd August, 2011, 12:42 PM
MAGICMOTORSPORT - Kayako SupportSuite Help Desk Software (http://helpdesk.magpro2.com/index.php?_m=news&_a=view)

magpro2 5.0 and new hardware

btr
4th August, 2011, 03:56 AM
MAGICMOTORSPORT - Kayako SupportSuite Help Desk Software (http://helpdesk.magpro2.com/index.php?_m=news&_a=view)

magpro2 5.0 and new hardware
Maybe enybody post magpro2 5.0 software to download?

psico
4th August, 2011, 12:06 PM
btr , not download only see....

manuel89
10th October, 2011, 10:14 PM
hi -.. pass pm


please ...... thanks
pass please

grinovsky
23rd October, 2011, 07:59 PM
hi guys
i just receive my chines kess clone black box
i had trayed all software posted here on DK forum and same result
i install driver ,and windows reconized the device as MAGpro2 serial
but when i run any version ,it say"device not found,check power and connections"
i have tryed on other computer,and same result
no lampe "green or red" come on ,any when
is there solution?

macxlulu
23rd October, 2011, 08:22 PM
must plug in the car :) also once did not know what's going on :)
magpro clone does not work without voltage from the obd

grinovsky
23rd October, 2011, 08:34 PM
i do it my freind
same result
and,i connected ampermetre betwen 12v source and OBD plug of my kess clone,and i find that I=0 mA

grinovsky
23rd October, 2011, 09:04 PM
...............work fine

grinovsky
23rd October, 2011, 09:08 PM
work fine chines clone untile now

macxlulu
23rd October, 2011, 09:25 PM
offers a better solder the pin from scratch for a feed then nothing has happened to the customer's car

grinovsky
23rd October, 2011, 09:36 PM
mmmmm
thank you my freind macxlulu
now,it work fine,all light are on red and green
it's creazy,when we get a new device
but,only one wire was good soldring in obd plug of this kess clone!!!

maglaras
27th October, 2011, 02:15 PM
HOW MANE CABLE DID YOU FOUND IN THE OBD 2??
i ask you because i have sum problem in me kess clone
and if you now can i work mag prog 4.2 in me kess clone

grinovsky
27th October, 2011, 03:35 PM
yes,my kess clone work fine with MAGpro4.2
i find most of wires bad soldering in obd plug of my kess,so i have resolder them,that's all

eduardo74
27th October, 2011, 04:29 PM
grinkovsky can you post pinout from black box to obd # pin to # pin, thanks in advance. I have black box, not working good

grinovsky
27th October, 2011, 06:10 PM
ok,this is pin to pin of kess cable
http://i43.servimg.com/u/f43/16/03/79/30/kess_p10.jpg

jejevfr
27th October, 2011, 08:43 PM
hello,
I am looking for reference of the EPROM 8 feet in U12, and the content of this bin eprom

or some magpro2 kess on the EPROM, I think that's what makes it possible to run magpro has all the speed of reading or writing.

if verified, ca permetre has all the right to modify or our magpro2 kess.

thank you in advance

edix
20th November, 2011, 11:54 AM
ok,this is pin to pin of kess cable
http://i43.servimg.com/u/f43/16/03/79/30/kess_p10.jpg


hello

anyone have this "schematic" for the RJ45 conection (mag pro)

my cable have only 4 wires... missing 1!!! CAN HIGH!!!! bahr.....

deffc0n
21st November, 2011, 09:47 AM
Hi

I want buy clone KESS or MAG PRO 2 what is better ?
Who use and send me good info about product what buy ?

kazikk
21st November, 2011, 09:51 AM
Hi,
Is MagPro2 4,2 clone can read/write calculate CRC EDC17 ?

Anmed
21st November, 2011, 01:11 PM
HI ALL!
WANTED dump of U12 eeprom. Apparently there is a set of passwords for tricores.
Also, I need a photo adapter x17.
I want to make it work with x17. http://www.digital-kaos.co.uk/forums/f173/kess-clone-repair-238848/
With the software magpro2 4.2 works fine. But only for the OBD2, I want to BDM.


KESS or MAG PRO 2 what is better ?Clone hardware is the same. This device works well two software: MagPro2 and KESS.

Is MagPro2 4,2 clone can read/write calculate CRC EDC17 ?There is a strong desire to make a clone of read / write Tricore...

Anmed
21st November, 2011, 08:31 PM
anyone have this "schematic" for the RJ45 conection (mag pro)

my cable have only 4 wires... missing 1!!! CAN HIGH!!!! bahr....I had this problem too. This is a picture made for you :wink:

Color by grinovsky(c)

edix
22nd November, 2011, 04:20 PM
I had this problem too. This is a picture made for you :wink:

Color by grinovsky(c)


many thks!!!!

pablo1971
26th November, 2011, 12:12 AM
just to add,ive just got a kess clone tool....tried it out on a few cars,with just reading for the moment,works a treat,im using the magpro2 latest software,and its ok...ive noticed that on a read it is a bit slow,but it does the job..

deffc0n
26th November, 2011, 12:22 AM
What is better clone Kess or Magpro2 ?

Anmed
26th November, 2011, 07:56 AM
Sometimes you just need to read, not just to write.
Post No. 195 on the previous page - I answered this question. In post number 198 also has the answer.
A clone is working with two software, hardware is the same. - Read this please!
Maybe the picture will be clearer?

serguei
26th November, 2011, 11:17 AM
Clone also works with FlashTec 13.1

deffc0n
26th November, 2011, 01:51 PM
Where find FlashTec 13.1 ?

Anmed
26th November, 2011, 02:13 PM
Do you think that this makes sense? Find the differences:

serguei
26th November, 2011, 03:36 PM
Difference:

Anmed
26th November, 2011, 04:33 PM
This is a clone?

serguei
26th November, 2011, 05:06 PM
Anmed I just want to show that the differences are. And three prolgrams always better than two.

Anmed
26th November, 2011, 08:58 PM
Where can I download this program?

serguei
26th November, 2011, 09:49 PM
For members of the Digital Kaos. No password. Deposit Files (http://depositfiles.com/files/sxrp5djb6)

marrijonas
28th November, 2011, 08:40 AM
I tested. Work CLONE GOOD!
And You have tried X17 module ? or need additional hardware?
Thanks.

maglaras
28th November, 2011, 04:03 PM
For members of the Digital Kaos. No password. Deposit Files (http://depositfiles.com/files/sxrp5djb6)

thank you for the software but do you have work x17 in clone?????????
the flashteck is the same like magpro but not have the x17 in the programe only
and the flash tech in the programe only say you that you must work x17 like magprok
thank you again

serguei
29th November, 2011, 07:44 AM
I do not have x17.

busaman
29th November, 2011, 07:25 PM
am i doing somthing wrong or is magpro faulty this is 2006 galaxy 2.0tdci i get the same response on every car i try.

28112011010.mp4 - YouTube

macxlulu
29th November, 2011, 07:30 PM
Probably sid803 why not go after the obd

serguei
29th November, 2011, 08:21 PM
I see that the selected maximum speed. Choose the minimum speed.

busaman
29th November, 2011, 09:34 PM
I see that the selected maximum speed. Choose the minimum speed.

i have tried all speeds, and both data, and all ecu,.

is there a problem with SID803 it says it will read and write. im sure it has sid206

Anmed
29th November, 2011, 10:13 PM
busaman (http://www.digital-kaos.co.uk/forums/members/80440-busaman/) Other ECU using the connect of CAN, work?

pablo1971
29th November, 2011, 10:21 PM
i would make sure that you are reading on the slow setting,this setting does change,,,,so after it has id the ecu make sure its on the slow setting again..

serguei
30th November, 2011, 07:44 AM
Yes, the speed must be chosen twice.

busaman
30th November, 2011, 07:52 AM
busaman (http://www.digital-kaos.co.uk/forums/members/80440-busaman/) Other ECU using the connect of CAN, work?

i have tried quite a few cars 2002 golf, 2004 polo, 2004 renault master, 2003 focus, 2006 galaxy, none will read

and i bought it becasue it is supposed to do more than galetto.

Anmed
30th November, 2011, 08:15 AM
Maybe these machines worked by K-line?
The device is not working the CAN? Check it here http://www.digital-kaos.co.uk/forums/f173/magpro2-184351/index14.html#post1341517

pablo1971
30th November, 2011, 08:17 AM
ive just bought one,and ive read a few cars no problem...mitsubishi lancer 2.0 readok----landrover dicovery tdv6 read ojk-passat edc15 readok-

have you checked the obd lead from earlier posts on here...

busaman
30th November, 2011, 09:49 PM
I had this problem too. This is a picture made for you :wink:

Color by grinovsky(c)


mine was the same!!!!!! grrrrrrrrrrrrrr did it cure yours and why would they cut it off

Anmed
1st December, 2011, 11:10 PM
busaman (http://www.digital-kaos.co.uk/forums/members/80440-busaman/)
If I have helped you - click 'thanks:party:'

busaman
2nd December, 2011, 08:29 AM
i have not tried it yet but will report as soon as i get one in.

gezame
3rd December, 2011, 12:50 AM
am i doing somthing wrong or is magpro faulty this is 2006 galaxy 2.0tdci i get the same response on every car i try.

28112011010.mp4 - YouTube (http://www.youtube.com/watch?v=r0C6aZOv38Y&feature=feedu)

Hi
I think, you have problem witch drivers for interface magpro2.
You need uninstal software & interface drivers, and install software & driver for the first version of software clone, magpro2 V3.0.
After install version V3.0 and drivers, you can update for latest software releases, V4.2A for esemple, but never update the drivers.
Regards.

Anmed
3rd December, 2011, 07:02 AM
His problem in the post 222. Where is the sixth pin?

busaman
3rd December, 2011, 09:36 AM
Hi
I think, you have problem witch drivers for interface magpro2.
You need uninstal software & interface drivers, and install software & driver for the first version of software clone, magpro2 V3.0.
After install version V3.0 and drivers, you can update for latest software releases, V4.2A for esemple, but never update the drivers.
Regards.

that was how i installed it originally i will try this also.

macxlulu
14th December, 2011, 07:43 PM
hello if anyone has tested the recovery mode after an interrupted transmission EDC16, where the ecu is blocked...? In magpro clone ??????

ps.mpps 5.0 with EDC16 vag recovery mode works ok

spawns3
22nd December, 2011, 03:16 AM
It's possible to use the magpro2 interface clone with the x17 softwere to do the OBD cars with EDC17 ?

Cheers

viki300
22nd December, 2011, 06:15 AM
It's possible to use the magpro2 interface clone with the x17 softwere to do the OBD cars with EDC17 ?

Cheers
NO way jose

chris_e36_328
25th December, 2011, 08:16 PM
Hi, got my MagPro2 delivered a few days back. A few questions for those more familiar with it:

1. is it safe to use the clone with v2.42a even though it was delivered with 4.1? I am annoyed with the fact I have to request key files from my supplier each time I change the laptop. How does 2.42 goes around this? has anyone got keygen for the 4.1?

2. My interface came in a black alu case, but looking at the pictures the PCB seems same as the one in blue alu listed in this thread ealrier on. To be frank I see no differences between these other than solering quality. Any one can elaborate?

3. Can anyone onfirm whether the Kess V1 clone HW is any better, stable or reliable than the MagPro2? There seem to be slight differences between these two.

4. re 803A: What is your experience with this SID? Reading/writing? Anyone has any connectivity issues with Kess v1 or MagPro or are these safe to use on the 803 and 803A?

edc
27th December, 2011, 04:44 PM
ps.mpps 5.0 with EDC16 vag recovery mode works ok

after an interrupted transmission ?

macxlulu
27th December, 2011, 09:05 PM
after an interrupted transmission ?

yes in edc16

KACZANUK
3rd January, 2012, 01:25 PM
MAGPro2 V4.2 X17Modul and BDM

http://img534.imageshack.us/img534/5855/afbeelding1rz.png
http://img14.imageshack.us/img14/4950/afbeelding2kk.png
http://img543.imageshack.us/img543/2370/afbeelding4x.png
http://img64.imageshack.us/img64/5287/afbeelding5v.png



https://rapidshare.com/files/3430895092/MAGPro2_42_by_Alex69.rar
RAR CODE
scary01with the collaboration of:
Alex69 Tuning Runner

You can use this software with this interface?

KESS OBD TUNING KIT (http://www.ecutool.com/KESS-OBD-TUNING-KIT_6111.html)

thank you

soundnavigator
3rd January, 2012, 05:01 PM
This is screenshot from old software for Magpro OBD Base and BDM, not for X17 modul. The X17 is separate tool with separate software. You can't use it with OBD Base hardware.

Best regards.

chris_e36_328
3rd January, 2012, 05:39 PM
Tried v4.2 today on 2005 Freelander 2.0d and 2007 Accord i-CTDI, only on read though.
Has anyone tried this on Ford 803A? Thanks

btr
3rd January, 2012, 06:51 PM
Tried v4.2 today on 2005 Freelander 2.0d and 2007 Accord i-CTDI, only on read though.
Has anyone tried this on Ford 803A? Thanks
With PSA sid803a read and write without problems,ford have same ecu

chris_e36_328
3rd January, 2012, 08:08 PM
Yes, mag pro lists 803A for PSA and Ford too. Was just wondering whether the fact that Galletto lists it for Pug but not for Ford means there is a difference in protocols or something along those lines.

Has anyone tried MagPro / kess v1 on 3.6 TDV8 SID203?

automotive
5th January, 2012, 03:59 PM
I help my red LED flashes black magpro clone message magpro not found make sure it is powered and connected to help help how to fix?

viki300
5th January, 2012, 05:18 PM
I help my red LED flashes black magpro clone message magpro not found make sure it is powered and connected to help help how to fix?

Well is it powered meaning that OBD connected to car it needs to be connected to first to be work

bmwm3power
17th January, 2012, 12:22 AM
Hello guys...

where can i buy a Magpro2 clone with x17 modul.

I need it to remap BMW EDC17.

Thank you...

pablo1971
17th January, 2012, 12:24 AM
no i dont think you can.....

bmwm3power
17th January, 2012, 12:26 AM
Why? Because it's out of stock?

ross79ta
17th January, 2012, 03:17 AM
The magpro2 clone is still at 4.2 sw version. The newest (from 5.0 >) it's only original.

bmwm3power
17th January, 2012, 08:47 AM
Ok..and for 4.2 there's no x17 modul?

ross79ta
17th January, 2012, 02:17 PM
The X17 is a tool in its own right. I mean... The X17 doesn't need MagPro2 Base to work.

lulu2003
17th January, 2012, 02:44 PM
isnt there a cracked X17 Software V3.10 spreaded around?!

BIOS
17th January, 2012, 04:34 PM
Only original tool for EDC/MED17.
No clone can do that.

bazare
17th January, 2012, 05:34 PM
just buy the original, you have a very good tool with the best support in the field.

ross79ta
17th January, 2012, 09:58 PM
just buy the original, you have a very good tool with the best support in the field.

I agree! :top: