Can't calibrate with cummins insite

[jupi]

I have a problem with calibrating ecu's in insite.
I've downloaded the 2010 incal dvd's and when I put them into the dvdstation I get no reconition see print screen
http://img3.imageshack.us/i/84205301.jpg/http://img3.imageshack.us/i/84205301.jpg/http://img3.imageshack.us/i/84205301.jpg/

also when I'm in simulation mode it switches from Pro plus to Pro.

Does anyone has an answer for this problem?

Thanks

[trucks]

I always copy incal to hard disk before using,that works well.As far as Pro Plus or Pro Insite,I never found any difference.

[jctech]

I have a problem with calibrating ecu's in insite.
I've downloaded the 2010 incal dvd's and when I put them into the dvdstation I get no reconition see print screen
http://img3.imageshack.us/i/84205301.jpg/http://img3.imageshack.us/i/84205301.jpg/http://img3.imageshack.us/i/84205301.jpg/

also when I'm in simulation mode it switches from Pro plus to Pro.

Does anyone has an answer for this problem?

Thanks

Use Insite Pro, not Pro Plus.
Insite has not detected a valid InCal disc, you will have a red DVD icon and InCal date by the drive letter when a valid InCal disc is detected.
You will have a red circle with a line through it if an expired InCal disc is detected
The Intelect folder must be in the root of the drive you are using, esdn is in that folder eg. D\Intelect\esdn

[jupi]

When I open the DVD this is it's structure, so I think that is OK.
The intelect folder is in the root.

[jctech]

Is the rest of the structure as shown in the screenshots?

Try copying the Intelect folder to your hard drive